2 / 6
010111_W4_E-5PS03_e | ValveTech Proportional directional valve
Hydraulic
Operating pressure max.: 315 bar
port T: 75 bar
summated pressure A, B: 350 bar
Flow rate: 1, 3, 5 l/min at Δp = 7 bar
Flow direction: see symbols in type code
Hydraulic uid: mineral oil according to DIN 51524,
other hydraulic uids upon request
Viscosity range: 10 - 350 cSt
Filtration: oil cleanliness according to ISO 4406 (1999)
18/16/13, lter with β 5(c) > 200
Repeatability: < 3 % with optimized PMW-signal*
Hysteresis: < 5 % with optimized PMW-signal*
* at 20 % to 100 % of the nominal valve current
Technical data
Mechanic
Design : spool type, direct operated
Size: NG 3 (company standard)
Fluid temperature: -20 ° C to +80 ° C
Ambient temperature: -20 ° C to +50 ° C
Storage temperature: -30 ° C to +60 ° C (non-condensing)
Installation position: any, preferably horizontal
Maximum acceleration: 5 g
Weight: 4/2-way-design: 0,42 kg
4/3-way-design: 0,58 kg
Material: valve parts: steel
seals: NBR, Viton optional
Surface protection: coil: zinc coated
body: nitrocarburized
Electric
Nominal voltage: 12 V DC, 24 V DC
Nominal valve current: 1,3 A (12 V), 0,63 A (24 V)
Nominal resistance (R20): 5,9 Ω (12 V), 24,0 Ω (24 V)
Power consumption: 9,6 W at nominal valve current
Shifting time: 100 % ED
Control command: PWM-signal
PWM-frequency: typically 140 Hz (depending on application)
Protection class: IP65 with correctly mounted and locked mating connec-
tor
Electric termination: electric plug according to DIN EN 175301-803 (formerly
DIN 43650) shape B, unterminated wire
Electronic controllers: see chapter 6 "electronics and sensor technology" as well
as our online catalogue at www.weber-hydraulik.com.