Poppet valve cartridges
Wanduh AG Tel. +41 33 672 72 72 E-mail: sales@wanduh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wanduh.com Data subject to change 1.11-2045E 1/2
CH-3714 Frutigen Edition 10 03
Solenoid poppet valve cartridge
• normally open
• Q
max
= 80 l/min
• p
max
= 350 bar
FUNCTION
If energised, the pressure proof solenoid pres-
ses the poppet auto the seat, acting against
a spring. In deenergised state the poppet is
lifted off its seat by the spring. One to the
pressure balanced design of the poppet-spool
no undesired opening as closing forces arise.
As a result, oil can ow in both directions
through the seating valve. The seat / piston
guide is sealed with an O -r ing. The seat with a
metallic seal closes off the valve so that there
is no leakage oil.
APPLICATION
Wanduh poppet valves can be used any-
where absolutely leak tight closing functions
are important. Completely sealed loading,
gripping and clamping operations are all
important functions which Wanduh poppet
valves can perform. Cartridge typ poppet
valves can be neatly accommodated in valve
blocks. Cavity tools are available for hire or
sale for machining aluminium or steel. See
data sheet register no. 2.13.
DESCRIPTION
This 2/2-way poppet valve in slip-in cartridge
design is mainly used in blocs for hydraulic in-
tegrated circuits. Poppet cartridge and spring
will be supplied as separate items, if ordered,
together with solenoid (VDE standard 0580)
and fastening screws.
Important: at the time the valve is taken into
service, the valve must be vented under pres-
sure (max. 2 revolutions of screw E).
TyPE CODE
Poppet valve cartridge 2 2 10 0-S1265 #
Poppet valve cartridge with solenoid 2 2 10 0-S1265 - #
Medium-solenoid M
Super-solenoid S
2-way (Connections)
2 Position
Nominal size 10
Normally open
Nominal voltage U
N
12 VDC G12 110 VAC R110
24 VDC G24 115 VAC R115
230 VAC R230
Design-Index (Subject to change)
GENERAL SPECIFICATIONS
Description 2/2-way poppet valve
Nominal size NG10
Construction Direct operated poppet valve
Operations Solenoid
Mounting cartridge form
4 solenoid xing screws M6
Ambient temperature -20…+50 °C
Mounting position any
Fastening torque M
D
= 8,9 Nm (quality 8.8)
Weight: 22100-S1265 m = 0,21 kg
. 22100-S1265- . . m = 2,07 kg
Volume ow direction any (see characteristics)
HyDRAULIC SPECIFICATIONS
Fluid Mineral oil, other uid on request
Contamination efciency ISO 4406:1999, class 20/18/14
(Required ltration grade ß10…16≥75)
refer to data sheet 1.0-50/2
Viscosity range 12 mm
2
/s…320 mm
2
/s
Fluid temperature -20…+70 °C
Working pressure Medium: p
max
= 160 bar
Super: p
max
= 350 bar
Max. volume ow Q
max
= 80 l/min, see characteristics
ELECTRICAL CONTROL
Construction Solenoid, wet pin push type, pressure
tight
Standard-nominal ow U
N
= 12 VDC, 24 VDC
U
N
= 110 VAC∗, 115 VAC∗, 230 VAC∗
AC = 50 to 60 Hz
∗ Rectier integrated in the plug
Other nominal voltages and nominal
performances on request
Voltage tolerance ±10% of nominal voltage
Protection class IP 65 to EN 60 529
Relative duty factor 100% DF (see data sheet 1.1-430)
Switching cycles 15 000/h
Operating life 10
7
(number of switching cycles, theoretically)
Connections / Power supply Over device plug connection to
ISO 4400 / DIN 43650, (2P+E),
other connections on request
Solenoid: – Medium SIN60V (Data sheet 1.1-145)
– Super SIS60V (Data sheet 1.1-150)
SyMBOLS
. 22100-S1265- . .
22100-S1265
NG10
16
14
15
Poppet valve cartridges
Wanduh AG Tel. +41 33 672 72 72 E-mail: sales@wanduh.com Illustrations not obligatory Data sheet no.
Postfach Fax +41 33 672 72 12 Internet: www.wanduh.com Data subject to change 1.11-2045E 2/2
CH-3714 Frutigen Edition 10 03
DIMENSIONS
. 22100-S1265- . . 22100-S1265
ACCESSORIES
Cartridge built-in sandwich body:
Sandwich Register 1.11
Special tool 983.2004 to poppet valve cartridge 22100-S1265
E = air bleed screw
CHARACTERISTICS Oil viscosity υ = 30 mm
2
/s
p = f (Q) Performance limit at -10%
∆p = f (Q) Pressure loss / ow characteristics
Flow direction
Type 1 → 2 2 → 1
M22100-S1265 3 4
S22100-S1265 1 2
For detailed cavity drawing
and cavity tools see data
sheet 2.13-1019
∗ Cartridge supplied with fastening screw M6 x 90 for steel bodies /
blocs. For aluminium bodies / blocs longer screws are recommended
(min. 2 screw diameter).
Technical explanation see data sheet 1.0-100
PARTS LIST
Position Article Description
10 500.4003 Poppet valve cart. 22100-S1265
11 052.4202 Spring 1,6 x 13,6 x 26
14 160.2236 O-ring ID 23,52 x 1,78
15 160.2252 O-ring ID 25,12 x 1,78
16 160.2188 O-ring ID 18,77 x 1,78
20 260.8… Medium-solenoid SIN60V
260.9… Super-solenoid SIS60V
30 239.2033 Plug
(incl. seal) HB0
40 219.2002 Plug
50 246.3190 Socket head cap screw M6 x 90 DIN 912
350
300
250
200
150
100
50
0
0 10 20 30 40 50 60 70 80
Q [l/min]
K0158
p [bar]
1
2
3
4
0 10 20 30 40 50 60 70 80
Q [l/min]
K0159
p [bar]
10
8
6
4
2
0
16
14
15
