PL..M
Pressure compensator priority
on demand valves
DESCRIPTION:
Walvoil has launched the new PL cartridge valve series, with priority on demand and
pressure compensator with static or dynamic load sense.
An external orice denes the ow to the valve and it provides the prioritary ow on
demand, regardless of pressure, while the exceeding ow can be used for auxiliary
functions.
The PL valve series is available in SAE 10, 12 & 16 size and dierent pressure ranges; it can
be used to supply steering control units and have the required ow for additional auxiliary
functions.
OPERATION:
In neutral position all input ow at port 3 is sent to the priority port 4 and exceeding ow is
sent to the port 2 to supply the auxiliary function. When the function at port 2 requires the
ows, the priority ow is supplied before any other function in the system.
The ow on port 4 is not subject to variation and remains constant under all working
conditions, even if ports 4 and 2 are at dierent pressure level.
Working condition
PL10M PL12M PL16M
Nominal ow
port 3
50 l/min
(13.2 US gpm)
100 l/min
(26.4 US gpm)
160 l/min
(42.2 US gpm)
max. on port 4
40 l/min
(10.5 US gpm)
80 l/min
(21.1 US gpm)
140 l/min
(36.9 US gpm)
Max. pressure
350 bar
(5100 psi)
Stand-by
PL..M/..AB
5 bar
(72.5 psi) 5 bar (72.5 psi) 5.5 bar (79.7 psi)
PL..M/..BB
10 bar
(145 psi) 7.5 bar (108 psi)
11 bar (159 psi)
PL..M/..CB -
10 bar
(145 psi) 22 bar (319 psi)
Fluid mineral based oil
Viscosity 10-200 cSt
Max level of
contamination
18/16/13 ISO4406
Fluid temperature
with NBR seals
from -20°C
(-4°F) to 80°C (176°F)
with FPM seals
from -20°C
(-4°F) to 100°C (212°F)
Environmental temp.
for working conditions
from -20°C
(-4°F) to 60°C (140°F)
Cavity SAE 10/4 SAE 12/4 SAE 16/4
Note - For dierent conditions, please contact Walvoil Sales Department.
□ Priority on-demand
□ Static and dynamic load sense
□ Priority ow rate independent
from the load
□ Zinc-plated and corrosion-proof
external components
□ Hardened parts to ensure
minimal wear and long life
□ Spool prole optimized through
CFD analysis
□ Industry common cavities
□ Heavy duty polyurethane seals
Technical specications and diagrams are measured with mineral oil of 46 cSt viscosity at
40°C (104°F) temperature.