E K10 X
Proportional solenoid valve
5 ways / 3 positions
DESCRIPTION:
Walvoil launches the new EK10X cartridge valve, proportional solenoid operated, 5-way,
3-position, spool-type, with integrated Load Sensing port.
Load Sensing signal is connected to port 5 when spool shifts in working position.
OPERATION:
The EK10X valve is available with dierent spools and manual override options, which
increase the versatility of the product and ensure high ow capacity with reduced space
requirements.
Optimized through CFD analysis to reduce the pressure drop through the main paths, the
new EK valve series ensure excellent switching performance using the same coils of the
new EK10L valve.
This spool-type valve is available in SAE 10 size and it is particularly suitable for precise
and controlled lifting and lowering movements, where an actuator must be proportionally
operated in both directions and stopped in any position.
The best controllability is obtained when the valve is used together with a pressure com-
pensator to manage the ow rate.
EK10X valve is assembled with the Walvoil crimping solution, that ensures, at the same
time, more robustness while mounting them on HICs (Hydraulic Integrated Circuits) and a
reduction of of leakage due to spool clearance.
Working condition
Nominal ow
22 l/min
(5.8 US gpm)
Max. pressure
250 bar
(3600 psi)
Oil leakage
at 210 bar
(3050 psi)
200 cm
3
/min (12.2 in
3
/min)
Fluid mineral based oil
Viscosity 10-200 cSt
Max level of contamination 18/16/13 ISO4406
Fluid temperature
with NBR seals
from -20°C
(-4°F) to 80°C (176°F)
with FPM seals
from -20°C
(-4°F) to 100°C (212°F)
Environmental temp. for
working conditions
from -20°C
(-4°F) to 60°C (140°F)
Cavity SAE 10/5
Coils type (BC)
Power rating 26 W (12/24 VDC)
Connector types
ISO4400 - Deutsch DT
AMP-JPT - Flying leads
Note - For dierent conditions, please contact Walvoil Sales Department.
□ External zinc-plated and
corrosion-proof components
□ Hardened precision spool and
cage to ensure minimal wear,
minimum leakage and long life
□ Flow path optimized through
CFD analysis
□ Industry common cavities
□ Heavy duty polyurethane seals
□ Several types of coil connectors
and voltages
□ Manual override options
□ All ports can be fully
pressurized
□ Minimum current
threshold/dead band
□ Optimized linearity and
hysteresis
Technical specications and diagrams are measured with mineral oil of 46 cSt viscosity at
40°C (104°F) temperature.