SD16
10 DBC004A
3. “A” side spool positioners
2. Spool options
1. Working section kits *
Working section options
1 mounted on A port.
2 mounted on B port.
3 mounted on A and B ports.
EL SD16 / P -- 1 8 L . P 1 (G3 -- 100) -- SAE *
TYPE CODE DESCRIPTION
P 5EL1167000 Parallel
S 5EL2167000 Series
SP 5EL3167000 Tandem
TYPE CODE CIRCUIT DESCRIPTION
1 3CU2510100 Double acting, 3 positions, with A and B
closed in neutral position
1CS 3CU2510200 Double acting, 3 positions, with A and B
closed in neutral position, metering type
1A 3CU2521100 Double acting, 3 positions, with Aopentotank
in neutral position
1B 3CU2522100 Double acting, 3 positions, with Bopentotank
in neutral position
2 3CU2525100 Double acting, 3 positions, with A and B open
to tank in neutral position
3 3CU2531100 Single acting on A, 3 positions, B plugged;
requires SAE 12 plug (see part I)
4 3CU2535100 Single acting on B, 3 positions, A plugged;
requires SAE 12 plug (see part I)
3.
Include boby, seals, rings and load check valve.
1.
88
9B--10B--11B
11--15--16
8PC
8EI3
1. 2. 3. 4. 5.
TYPE CODE DESCRIPTION
8 5V08110000 With spring return in neutral position
9B 5V09110000 With detent in position 1 and spring return in
neutral position
10B 5V09110000 With detent in position 2 and spring return in
neutral position
11 5V11110000 With detent in position 1, neutral and 2
11B 5V11210000 With detent in position 1 and 2, spring return
in neutral position
15 5V15110000 With detent in position 1 and neutral
16 5V16110000 With detent in position 2 and neutral
8PC 5V08111709 Proportional pneumatic kit
8EI3 5V08110350 12 VDC ON/OFF electro--hydraulic kit
5V08110351 24 VDC ON/OFF electro--hydraulic kit
NOTE (*) -- Items are referred to UN- UNF thread.
I
Port relief valve setting in bar
Description example: