Page MD98
MECHANICAL DIRECTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: tecnord@tecnord.com • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 40 / 2017
DESCRIPTION
Special cavity, insert type, shuttle valve.
OPERATION
The QS-CSB allows ow from the higher pressure of (1) or (3) to (2). QS-CSB is an insert
type valve, cavity must be plugged with a M10x1 plug.
The valve is commonly used as a load sense to direct oil from the pressure side of a
bidirectional hydraulic motor to a pressure released hydraulic brake.
FEATURES
• Hardened parts for long life.
MECHANICAL DIRECTIONAL CONTROLS - page 100
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein).
Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Via Malavolti, 36 - 41122 Modena - Italy - Phone +39 059/254895 - Fax +39 059/253512 - www.tecnord.com - mail: tecnord@tecnord.com
MECHANICAL DIRECTIONAL CONTROLS
QS-CSB Shuttle Valve, Insert Type
DESCRIPTION
Special cavity, insert type, shuttle valve.
OPERATION
The QS-CSB allows flow from the higher pressure of (1) or (3) to (2). QS-CSB is an insert type valve, cavity
must be plugged with a M10x1 plug.
The valve is commonly used as a load sense to direct oil from the pressure side of a bidirectional hydraulic
motor to a pressure released hydraulic brake.
FEATURES
x Hardened parts for long life.
HYDRAULIC SYMBOL
PERFORMANCE
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Nominal Flow 1 GPM (4 LPM)
Rated Operating Pressure 3500 PSI (245 bar)
(
(
(
)
)
)
Typical Internal Leakage
(150 SSU)
1 cu in/min (16 ml/min)
p
g
g
g
(
(
(
)
)
)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
(
(
(
(
)
)
)
)
Filtration ISO 18/16/13
y
y
y
y
g
g
g
g
(
(
(
)
)
)
)
Media Operating
Temperature Range
-40q to 250qF (-40q to 120qC)
Weight .16 lbs (.07 kg)
p
p
p
p
g
g
g
g
Operating Fluid Media General Purpose Hydraulic Fluid
g
g
g
g
(
(
(
g)
g)
g)
g)
Cartridge Torque
Requirements
10 – 12 Nm
p
p
p
p
g
g
g
g
p
p
p
y
y
y
y
Cavity T075
q
Cavity Tools Kit
(form tool, reamer, tap)
K-T075
y
y
y
y
(
(
(
(
p)
)
)
)
MECHANICAL DIRECTIONAL CONTROLS - page 100
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein).
Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Via Malavolti, 36 - 41122 Modena - Italy - Phone +39 059/254895 - Fax +39 059/253512 - www.tecnord.com - mail: tecnord@tecnord.com
MECHANICAL DIRECTIONAL CONTROLS
QS-CSB Shuttle Valve, Insert Type
DESCRIPTION
Special cavity, insert type, shuttle valve.
OPERATION
The QS-CSB allows flow from the higher pressure of (1) or (3) to (2). QS-CSB is an insert type valve, cavity
must be plugged with a M10x1 plug.
The valve is commonly used as a load sense to direct oil from the pressure side of a bidirectional hydraulic
motor to a pressure released hydraulic brake.
FEATURES
x Hardened parts for long life.
HYDRAULIC SYMBOL
PERFORMANCE
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Nominal Flow 1 GPM (4 LPM)
Rated Operating Pressure 3500 PSI (245 bar)
(
(
(
)
)
)
Typical Internal Leakage
(150 SSU)
1 cu in/min (16 ml/min)
p
g
g
g
g
(
(
(
)
)
)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
(
(
(
(
)
)
)
)
Filtration ISO 18/16/13
y
y
y
y
g
g
g
g
(
(
(
)
)
)
)
Media Operating
Temperature Range
-40q to 250qF (-40q to 120qC)
Weight .16 lbs (.07 kg)
p
p
p
p
g
g
g
g
Operating Fluid Media General Purpose Hydraulic Fluid
g
g
g
g
(
(
(
g)
g)
g)
g)
Cartridge Torque
Requirements
10 – 12 Nm
p
p
p
p
g
g
g
g
p
p
p
y
y
y
y
Cavity T075
q
Cavity Tools Kit
(form tool, reamer, tap)
K-T075
y
y
y
y
(
(
(
(
p)
)
)
)
QS-CSB SHUTTLE VALVE, INSERT TYPE
Nominal Flow 1 GPM (4 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 1 cu in/min (16 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .16 lbs (.07 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 10 - 12 Nm
Cavity T075
Cavity Tools Kit
(form tool, reamer, tap) K-T075
VALVE SPECIFICATIONS
HYDRAULIC SYMBOL
PERFORMANCE
Actual Test Data (Cartridge Only)
1
2
3
Page MD99
MECHANICAL DIRECTIONAL CONTROLS
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: tecnord@tecnord.com • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 40 / 2017
DIMENSIONS
ORDERING INFORMATION
QS-CSB – – 00
OPTIONS
Buna Standard 00
Viton Standard V0
MECHANICAL DIRECTIONAL CONTROLS - page 101
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein).
Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Via Malavolti, 36 - 41122 Modena - Italy - Phone +39 059/254895 - Fax +39 059/253512 - www.tecnord.com - mail: tecnord@tecnord.com
MECHANICAL DIRECTIONAL CONTROLS
DIMENSIONS
ORDERING INFORMATION
QS-CSB - - 00
OPTIONS
Buna Standard 00
Viton Standard V0
MECHANICAL DIRECTIONAL CONTROLS - page 101
WARNING: the specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein).
Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Via Malavolti, 36 - 41122 Modena - Italy - Phone +39 059/254895 - Fax +39 059/253512 - www.tecnord.com - mail: tecnord@tecnord.com
MECHANICAL DIRECTIONAL CONTROLS
DIMENSIONS
ORDERING INFORMATION
QS-CSB - - 00
OPTIONS
Buna Standard 00
Viton Standard V0