MECHANICAL PRESSURE CONTROLS
Page MP56
W 50/2022
Via Malavolti, 36 - 41122 Modena - ITALY - Phone +39 (059) 254895 - Fax +39 (059) 253512 - mail: tecnord@tecnord.com - www.tecnord.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
DESCRIPTION
Special cavity, pressure compensating valve, bypass type, for 3 way ow control, normally closed.
OPERATION
The QC-CP3 with an orice between ports (3) and (1) maintains a constant ow rate from (3) regardless of load
pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at (2) is less than
(1). The valve’s spool maintains a constant differential pressure across an external orice, thereby regulating the
hydraulic ow rate from (3) to (2), (see options table for pressure ranges). When used with an orice as described
above, as a priority type regulator, delivering pump ow rst to (3), then bypassing excess to (2). All ports may
be fully pressurized.
FEATURES
• Hardened parts for long life.
• Spring range from 8 to 24 bar.
023
018
014
008
15
5
0
10
15
20
25
30
30 45 60
Flow (lt/min)
Pressure @ Port 3 (bar)
75 90 105 120
023
018
014
008
15
5
0
10
15
20
25
30
30 45 60
Flow (lt/min)
Pressure @ Port 3 (bar)
75 90 105 120
QC-CP3 PRESSURE COMPENSATING VALVE, BYPASS TYPE FOR 3 WAY FLOW CONTROL
Pressure (bar) vs. ow (lt/min)
For various pressure compensator settings
Nominal Flow 33 GPM (120 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage
(150 SSU) 35 ml/min @ 250 bar
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .35 lbs (.16 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 52 ft-lbs (70 Nm)
Cavity T031 (Special)
Cavity Tools Kit
(form tool, reamer, tap) K-T031
Seal Kit 210902321
VALVE SPECIFICATIONS
Pressure compensator for 3 way ow control,
typically used with an external orice between
ports (3) and (1). Port (1) should sense upstream
pressure of orice.
HYDRAULIC SYMBOL
PERFORMANCE
Actual Test Data (Cartridge Only)
Pressure @ Port 3 (bar)
Flow (lt/min)
MECHANICAL PRESSURE CONTROLS
Page MP57
W 50/ 2022
Via Malavolti, 36 - 41122 Modena - ITALY - Phone +39 (059) 254895 - Fax +39 (059) 253512 - mail: tecnord@tecnord.com - www.tecnord.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
DIMENSIONS
ORDERING INFORMATION
(for bodies style and sizes see section “Accessories”)
QC-CP3 – – –
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/2” BSP Ports
S #8 SAE Ports
PRESSURE SETTINGS
008 8 bar (115 PSI) @ 60 l/min
014 14 bar (200 PSI) @ 60 l/min
018 18 bar (260 PSI) @ 60 l/min
023 23 bar (330 PSI) @ 60 l/min
