SOLENOID OPERATED DIRECTIONAL CONTROLS
Page ST32
W 3/2023
Via Malavolti, 36 - 41122 Modena - ITALY - Phone +39 (059) 254895 - Fax +39 (059) 253512 - info@tecnord.com - www.tecnord.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
HE-S2B PILOT OPERATED POPPET, 2 WAY NORMALLY CLOSED
DESCRIPTION
“High Pressure”10 size, 7/8-14 thread, “Delta” series, solenoid operated, 2 way normally closed, pilot
operated poppet valve with reverse ow energized and de-energized.
OPERATION
When de-energized the HE-S2B acts as a check valve, allowing ow to pass from (2) to (1), while blocking
ow from (1) to (2). When energized the valve opens allowing ow to pass from (1) to (2).
FEATURES
• Hardened parts for long life.
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
• Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Nominal Flow 15 GPM (57 LPM)
Rated Operating Pressure 4000 PSI (276 bar)
Typical Internal Leakage (150 SSU) 0-5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .39 lbs (.17 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 50 ft-lbs (67.8 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity DELTA 2W
Cavity Tools Kit
(form tool, reamer, tap) 40500000
Seal Kit 21191200
VALVE SPECIFICATIONS
Actual Test Data (Cartridge Only)
0
50
100
150
200
250
0
300
5 10 15 20
0
Flow (GPM)
5
10
15
20
Pressure Drop (PSI)
0 25 50 75
Flow (LPM)
Pressure Drop (bar)
Port 1 to 2 (eng) Port 2 to 1 (eng) Port 2 to 1 (de-eng)
PERFORMANCE
HYDRAULIC SYMBOL
Uses “L” Coil.
2
1
SOLENOID OPERATED DIRECTIONAL CONTROLS
Page ST33
W 3/ 2023
Via Malavolti, 36 - 41122 Modena - ITALY - Phone +39 (059) 254895 - Fax +39 (059) 253512 - info@tecnord.com - www.tecnord.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/8 NPTF Ports
S #8 SAE Ports
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
25 25 VAC
11 120 VAC
22 220 VAC
“L” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “L” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
HE-S2B – – – –
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .68 lbs (.31 kg)
Note: Aluminum, NOT
durability rated for 4000
PSI. Consult factory for
body options.