PROPORTIONAL CONTROLS
Page PT46
W 50/2022
Via Malavolti, 36 - 41122 Modena - ITALY - Phone +39 (059) 254895 - Fax +39 (059) 253512 - mail: tecnord@tecnord.com - www.tecnord.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
EU-F2A 2 WAY PRESSURE COMPENSATED PROPORTIONAL FLOW REGULATOR
DESCRIPTION
12 size, 1” 1/16-12 thread, “Tecnord” series, solenoid operated, normally closed, poppet style, restrictive type 2
ways pressure compensated proportional ow regulator.
OPERATION
EU-F2A maintains a constant ow rate out of (2) regardless of load pressure variations in the circuit downstream
of (1). When coil is not energized, there is no regulated ow out of (2). The valve begins to respond to load
variations when the ow through the valve creates a pressure differential across the control spool.
Reverse ow from (2) to (1) returns through the control spool and is not compensated. The manual override
increases ow by counter-clockwise rotation of the manual override knob.
FEATURES
• Hardened parts for long-life.
• Industry common cavity.
• Excellent linearity and low hysteresis characteristics.
• Cartridges are voltage interchangeable.
• Optional coil voltages and terminations available.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
Regulated Flow vs. Pressure
Flow vs. Current
1
2
3
Regulated Flow vs. Pressure
Flow vs. Current
1
2
3
Flow Range See curves for various versions
Max System Pressure 3500 PSI (241 bar)
Leakage 0-10 drops / min @ 245 bar
Hysteresis ±5%
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -30°C / +100°C
Weight .72 lbs (.32 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 37 ft-lbs (50 Nm)
Coil Nut Torque Requirements 2-3 ft-lbs (3-4 Nm)
Cavity TECNORD 3W
Cavity Tools Kit
(form tool, reamer, tap) 40500034
Current Supply Characteristics PWM (Pulse Width Modulation)
Rated Current Range 500-1400 mA
PWM or Super-Imposed
Dither Frequency 100 Hz
Coil Resistance (12 VDC) 7.2 Ohm ±5% at 68°F (20°C)
VALVE SPECIFICATIONS
COIL SPECIFICATIONS
Port (1) must be connected
in the manifold to port (3).
HYDRAULIC SYMBOL
PERFORMANCE
Regulated Flow vs. Pressure
Pressure Drop 1-2 bar
Regulated Flow (l/min)
2
3