c
2025 Sun Hydraulics 1 of 2
MODEL
770224X01770224X01
24 VDC coil with ISO/DIN 43650, Form A connector with TVS
Diode (XMD-01 driver included)
TECHNICAL DATATECHNICAL DATA
Maximum Coil Temperature at 68ºF (20ºC)
Ambient
218ºF (105ºC)
Arc Suppression (TVS) Included
Power Consumption (cold) - at rated
voltage
22 watts
Maximum Ambient Temperature 50 °C
Voltage/Frequency 24 VDC
Operating Voltage Range +/- 10% nominal
Duty Cycle Rating 100 %
Connector
ISO4400 - EN/DIN175301-803, Form A (ISO/DIN
43650) 3-pin
Connector Environment Rating IP65/IP67
Solenoid Tube Diameter 19 mm
Coil Nut Torque 0,5 Nm
Model Weight 0.40 kg.
PROPORTIONAL PERFORMANCE DATAPROPORTIONAL PERFORMANCE DATA
Maximum Current 590 mA
Nominal Coil Resistance at 122ºF (50ºC) Stabilized 37.2 ±5% ohms
Nominal Coil Resistance at 68ºF (20ºC) Cold 26.2 ±5% ohms
sunhydraulics.com/model/
770224X01
c
2025 Sun Hydraulics 2 of 2
TECHNICAL FEATURESTECHNICAL FEATURES
Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power
dissipation @ 75°C is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
Power cable with mating connector is required and is not included with product.
This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be
adjustable between 100 - 250 Hz.
IP rating is dependent on the coil connector and the mating connector used.
This coil assembly includes the XMD-01 electro-proportional driver.
RoHS compliant. Restricted materials less than 0.1% total by weight.
The external steel shell is plated with clear zinc trivalent.
