Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 5
MODEL
YFFE
Restrictive pressure compensator assembly
CAPACITY: 160 L/min.
Restrictive pressure compensator
This valve assembly consists of a normally-open restrictive style compensator on the P port and a shuttle that
senses pressure from the higher of the 2 work ports. Its purpose is to provide a relatively constant pressure drop
across the directional valve thus isolating the directional valve spool from high flow forces. This is accomplished by
throttling the supply into the P port. The constant drop creates a pressure compensated flow control out of the
directional valve.
snhy.com/YFFE
TECHNICAL DATA
Capacity 160 L/min.
Body Type Sandwich
Interface ISO 07
Body Features Meter in P
Operating Characteristic Restrictive
Model Weight 2.42 kg.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
NOTES
Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 5
MODEL
YFFE
Restrictive pressure compensator assembly
CAPACITY: 160 L/min.
Continued from
previous page
(A)
(X)CONTROL
X Not Adjustable
(H)DIFFERENTIAL PRESSURE
H 200 psi (14 bar)
D 50 psi (3,5 bar)
F 100 psi (7 bar)
G 150 psi (10,5 bar)
(N)SEAL MATERIAL
N Buna-N
E EPDM
V Viton
1 2 3 4
5 6 7 8
9 10 11 12
OPTION SELECTION EXAMPLE: YFFEXHNAB
PRIMARY CARTRIDGE
A A (with LPHC primary cartridge, Normally open, modulating element)
A A (with LPHCL primary cartridge, Tuneable, normally open, modulating element)
INCLUDED COMPONENTS
Part Description Quantity
500-001-111 O-Ring 2
500-001-118 O-Ring 4
700-006 Seal Plate 1
811-001-006 Pin 2
A330-006-004 Sub-assembly 1
CSABXXN Cartridge 1
LPHCXHN Cartridge - Primary 1
TECHNICAL FEATURES
This assembly is normally used in a multi-station load-sense system or with a pressure compensated pump.
The pressure differential across the orifice (directional valve) varies with flow and system pressure. It is at its highest at zero flow and drops with increasing flow.
Another term for this assembly is a hydrostat.
MANIFOLD FACES
FACE GRID
Face 2
PRIMARY CARTRIDGE CONFIGURATION
Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 3 of 5
Face 5
Face 6
Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 4 of 5
Face 7
Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 5 of 5
Face 10
Face 14
