c
2017 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 1
MODEL
PPDB8
Pilot operated, pressure reducing/relieving main stage with integral T-8A control
cavity
SERIES 1 / CAPACITY: 40 L/min. / CAVITY: T-11A
CONFIGURATION
W Minimum Control Pressure 100 psi (7 bar)
N Seal Material Buna-N
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
This valve is a 3-way, normally open modulating element that incorporates an integral pilot control cavity. The pilot
control cavity will accept any T-8A pressure control cartridge. The valve reduces a high primary pressure at the inlet
(port 2) to a constant reduced pressure at port 1, with a full flow relief function from port 1 to tank (port 3). The pilot
cartridge's setting determines the difference in pressure between reduced pressure (port 1) and the tank (port 3).
TECHNICAL DATA
Maximum Operating Pressure 350 bar
Control Pilot Flow 0,11 - 0,16 L/min.
Pilot Control Cavity T-8A
Pilot Control Valve Installation Torque 27 - 33 Nm
Pilot Control Valve Hex Size 22,2 mm
Seal kit - Cartridge Buna: 990011007
Seal kit - Cartridge EPDM: 990011014
Seal kit - Cartridge Polyurethane: 990011002
Seal kit - Cartridge Viton: 990011006
(W)MINIMUM CONTROL PRESSURE
W 100 psi (7 bar)
D 25 psi (1,7 bar)
(N)SEAL MATERIAL
N Buna-N
E EPDM
V Viton
snhy.com/
PPDB8
Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled at
point of use.
NOTES
Model Code Example: PPDB8WNCONFIGURATION OPTIONS
