型号
FREP
FLeX Series 3通, 直式, 比例 , 旁路/流,先 流量控制
系列系列 3 / 流量流量: 30 gpm / 插孔插孔: T-17A
品配置品配置
X 控制方式 无手超控
C 流量 名 22 gpm (88 L/min.)
N 密封材料 丁橡
912 圈 Deutsch DT04-2P 12 VDC
注意:技参数可能因品配置而不同。看品配置部分。
This valve is a normally closed, electro-proportional, bypass/restrictive, priority flow control valve. The valve takes
an input flow at port 1 and uses it to satisfy the priority flow at port 3. If the input flow exceeds the priority
requirement, the excess is bypassed out port 2.
The valve pressure compensates the priority flow for precise flow regulation for applications where there may be
wide pressure fluctuations. Port 2 may also be completely blocked so that the valve can be used as a 2-way,
electro-proportional pressure compensated flow control from 1 to 3.
技技数据数据
最大操作力 5000 psi
粘度范 35 - 2000 SUS
Typical Valve Leakage at 110 SUS (24 cSt) from port 1 to port 3 at 1450 psi (100 bar) 30 mL/min.
Typical Valve Leakage at 110 SUS (24 cSt) from port 1 to port 3 at 5000 psi (350 bar) 110 mL/min.
定 50 ms
切率 3,600 max. cycles/hr
Seal kit - Cartridge Buna: 990017007
Seal kit - Cartridge Viton: 990017006
(X)控制方式控制方式
X 无手超控
(C)流量流量
C 名 22 gpm (88 L/min.)
A 名 8 gpm (30 L/min.)
B 名 16 gpm (60 L/min.)
(N)密封材料密封材料
N 丁橡
V 橡
(912)圈圈 *
912 Deutsch DT04-2P 12 VDC
无圈
* Additional coil options are available
sunhydraulics.com/model/
FREP
注注
此品的利正在申中。
当Sun,插装的隙要求。不同的控制方式以及圈要求的隙不一。
在的最大尺寸之外需增加外的2.00 inches (50,8 mm),以行圈的安装和移除。
Model Code Example: FREPXCN912CONFIGURATION OPTIONS