MODEL
FDEA
Fully adjustable pressure compensated flow control valve with reverse flow
check
SERIES 3 / CAPACITY: 95 L/min. / CAVITY: T-16A
Fully adjustable, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for
meter-in or meter-out applications where there may be wide pressure fluctuations. They are infinitely adjustable
from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow from
port 2 to port 1.
TECHNICAL DATA
Maximum Operating Pressure 350 bar
Adjustment - Number of Counterclockwise Turns - Fully Closed to Fully Open 5
Locknut Hex Size 15 mm
Locknut Torque 9 - 10 Nm
Seal kit - Cartridge Buna: 990-016-007
Seal kit - Cartridge Polyurethane: 990-016-002
Seal kit - Cartridge Viton: 990-016-006
(L)CONTROL
L Standard Screw Adjustment
H Calibrated Handknob with Detent Lock
K Handknob
Y Tri-Grip Handknob
(A)ADJUSTMENT RANGE
A .2 - 25 gpm (0,8 - 95 L/min.)
B .2 - 16 gpm (0,8 - 60 L/min.)
(N)SEAL MATERIAL
N Buna-N
E EPDM
V Viton
MATERIAL/COATING
Standard Material/Coating
/LH Mild Steel, Zinc-Nickel
snhy.com/
FDEA
TECHNICAL FEATURES
All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge
extension dimensions from the mounting surface may vary.
A balanced adjustment mechanism allows for easy adjustment even at high pressures.
The sharp-edged orifice design minimizes flow variations due to viscosity changes.
Minimum leakage is .2 gpm (0,8 L/min) when the adjustment mechanism is turned to the shut-off position.
PERFORMANCE CURVES
Model Code Example: FDEALANCONFIGURATION OPTIONS