2-way, direct-acting, solenoid-operated directional poppet valve
Capacity:
10 gpm (40 L/min.)
Functional Group:
Products : Cartridges : Directional : 2 Way : Solenoid Operated Poppet
Model:
DTDA
Product Description
This solenoid-operated, 2-position, 2-way cartridge is a direct-acting, poppet-style valve used to control the direction of flow in a hydraulic circuit.
The valve is available in either a normally open or normally closed configuration and is well suited for load holding or load blocking applications
where low leakage is a requirement.
D-Control, C-Spool
Download
D-Control, H Spool
Download
L-Control, C-Spool
Download
L-Control, H-Spool
Download
M-Control, C-Spool
Download
M-Control, H-Spool
Download
T-Control, C-Spool
Download
T-Control, H-Spool
Download
X-Control, C-Spool
Download
X-Control, H-Spool
Download
Technical Features
The solenoid tube assembly is fatigue rated for 5000 psi (350 bar)
service.
A wide variety of coil termination and voltage options are available.
This valve is direct actuated and requires no minimum hydraulic
pressure for operation.
The solenoid's unique magnetic design results in a high efficiency
solenoid, yielding high spool actuating force per Watt expended,
leading to reliable valve shifting.
Valves exhibit extremely low leakage rates; less than 10 drops/min. @
5000 psi (0,7 cc/min @ 350 bar).
Coils are interchangeable with other Sun Series 1 solenoid products
and can be mounted on the tube in either direction.
Suitable for load holding applications.
Coil connector options offer ratings up to IP69K. See individual coil
product pages for details. Additional weatherized coils and kits are
available for more complete environmental protection.
This cartridge has several manual override choices, including no
manual override. See Option Selection below.
Incorporates the Sun floating style construction to minimize the
possibility of internal parts binding due to excessive installation torque
and/or cavity/cartridge machining variations.
This valve utilizes a wet armature design. This means that the working
fluid surrounds the armature and is exposed to the heat generated by
the coil. This can be a factor if the coil is energized for long periods of
time. Some fluids, notably water/glycol mixtures, break down at these
temperatures over time and form varnishes that
will affect the function
of the cartridge.
Technical Data
U.S. Units Metric Units
Cavity T-13A
Capacity 10 gpm 40 L/min.
Manual Override Force Requirement 5 lbs/1000 psi @ Port 1 3 kgs/100 bar @ Port 1
Manual Override Stroke .10 in. 2,5 mm
Maximum Operating Pressure 5000 psi 350 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 10 drops/min.@5000 psi 0,7 cc/min.@350 bar
Response Time - Typical 50 ms
Series (from Cavity) Series 1
Switching Frequency 15000 cycles/hr
Solenoid Tube Diameter .75 in. 19 mm
Valve Hex Size 7/8 in. 22,2 mm
Valve Installation Torque 30 - 35 lbf ft 40 - 50 Nm
Seal Kits - Cartridge Buna: 990-413-007
Seal Kits - Cartridge Viton: 990-413-006
Seal Kits - Coil Viton: 990-770-006
Model Weight 0.65 lb. 0.29 kg.
DTDA-XCN
Control
Spool Configuration
Seal Material
Preferred Options
X No Manual Override
Standard Options
D Twist/Lock (Dual) Manual
Override
L Twist/Lock (Detent)
Manual Override
M Manual Override
T Twist Manual Override
Preferred Options
C Normally Closed
H Normally Open
Preferred Options
N Buna-N
Standard Options
V Viton
Preferred
Options
Standard Coil Options (View All)
AMP Junior Timer
Deutsch DT04-2P
DIN 43650 4 pin
(Hirschman)
Metri-Pack
SAE J858A
Twin Lead
***
no coil 524 SAE J858A 24 VDC
812 Metri-Pack 12 VDC
211 DIN 43650 4 pin
(Hirschman) 115 VAC
528 SAE J858A 28 VDC
814 Metri-Pack 14 VDC
212 DIN 43650 4 pin
(Hirschman) 12 VDC
536 SAE J858A 36 VDC
824 Metri-Pack 24 VDC
214 DIN 43650 4 pin
(Hirschman) 14 VDC
612 AMP Junior Timer 12
828 Metri-Pack 28 VDC
223 DIN 43650 4 pin
(Hirschman) 230 VAC
614 AMP Junior Timer 14
836 Metri-Pack 36 VDC
224 DIN 43650 4 pin
(Hirschman) 24 VDC
624 AMP Junior Timer 24
848 Metri-Pack 48 VDC
228 DIN 43650 4 pin
(Hirschman) 28 VDC
628 AMP Junior Timer 28
912 Deutsch DT04-2P 12
236 DIN 43650 4 pin
(Hirschman) 36 VDC
636 AMP Junior Timer 36
914 Deutsch DT04-2P 14
248 DIN 43650 4 pin
(Hirschman) 48 VDC
712 Twin Lead 12 VDC
924 Deutsch DT04-2P 24
297 DIN 43650 4 pin
(Hirschman) 24 VAC
724 Twin Lead 24 VDC
928 Deutsch DT04-2P 28
298 DIN 43650 4 pin
(Hirschman) 220 VDC
728 Twin Lead 28 VDC
936 Deutsch DT04-2P 36
299 DIN 43650 4 pin
(Hirschman) 127 VDC
736 Twin Lead 36 VDC
948 Deutsch DT04-2P 48
514 SAE J858A 14 VDC
Additional Options (Click Here)
Additional Coils
512 SAE J858A 12 VDC
71239 Twin Lead to Connector, 9
inch lead length
72429 Twin Lead to Connector, 9
inch lead length
548 SAE J858A 48 VDC
71299 Twin Lead to Deutsch
connector, 9 inch lead
length
72439 Twin Lead to Connector, 9
inch lead length
648 AMP Junior Timer 48
714 Twin Lead 14 VDC
72499 Twin Lead to Deutsch
connector, 9 inch lead
length
71219 Twin Lead to Delphi
Weather-Pack Connector, 9
inch lead length, 12 VDC
72419 Twin Lead to Delphi
Weather-Pack Connector, 9
inch lead length 24 VDC
748 Twin Lead 48 VDC
Stainless material/seal options not available for this model
Related Models
DTDAS
Special Notes
No Special Notes Available for selected model.
| | | | | |
Copyright © 2009-2010 Sun Hydraulics Corporation. All rights reserved.
Terms and Conditions - ISO Certification - Statement of Privacy