MODEL

DKFP

Normally closed, balanced poppet, logic element - pressure adjustable

SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-22A

This is a normally closed, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppet

remains closed until the pilot pressure reaches the setting established by the integral pilot relief stage, at which

Locknut Hex Size 15 mm

Locknut Torque 9 - 10 Nm

Seal kit - Cartridge Buna: 990-022-007

Seal kit - Cartridge Polyurethane: 990-022-002

Seal kit - Cartridge Viton: 990-022-006

(L)CONTROL

L Standard Screw Adjustment

C Tamper Resistant - Factory Set

(A)ADJUSTMENT RANGE

Unique balanced construction provides predictable switching with 5000 psi (350 bar) at both port 1 and port 2. When the remote pressure signal at port 3 exceeds

the internal valve setting, the valve shifts to the open position.

Any backpressure at the drain port is directly additive to the valve setting.

Valve will reseat when the pilot pressure falls to 85% of the cracking value.

Port 1 and port 2 are fully sealed from port 3 and port 4. Ports 3 and 4 are positively sealed.

Leakage rate between port 1 and port 2 is very low, typically less than 10 drops/min. at 5000 psi (0,7 cc/min at 350 bar).

All ports will accept 5000 psi (350 bar).

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

PERFORMANCE CURVES