 2019 Sun Hydraulics 1 of 2

MODEL

DAAP

2-way, air-operated, spool directional valve - pilot capacity

SERIES P / CAPACITY: 1 L/min. / CAVITY: T-8A

(F)CONTROL

F External 1/8 NPTF Port

E External 4-SAE Port

P External 1/8 BSPP Port

(C)SPOOL CONFIGURATION

C Normally Closed

H Normally Open

(N)SEAL MATERIAL

N Buna-N

E EPDM

V Viton

MATERIAL/COATING

Standard Material/Coating

/AP Stainless Steel, Passivated

C-Spool

H-Spool

NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

These pilot-stage, directional, 2-position, 2-way valves are pneumatically operated, spring-return cartridges and are

available in either normally open or normally closed configurations. These cartridges are designed for pilot flow

applications and utilize Sun's T-8A cavity so they can be used in conjunction with Sun's pilot-operated, main-stage

valves.

TECHNICAL DATA

Cavity T-8A

Series P

Capacity 1 L/min.

Maximum Operating Pressure 350 bar

Maximum Valve Leakage at 110 SUS (24 cSt) 0,7 cc/min.@350 bar

Minimum Pilot Pressure to Operate See Technical Features

Pilot Control Port See Control Options

Valve Hex Size 22,2 mm

Valve Installation Torque 27 - 33 Nm

Seal kit - Cartridge Buna: 990508007

Seal kit - Cartridge Viton: 990508006

Model Weight 0.14 kg.

snhy.com/

DAAP

Model Code Example: DAAPFCNCONFIGURATION OPTIONS

 2019 Sun Hydraulics 2 of 2

TECHNICAL FEATURES

Utilizes the Sun T-8A 2-port cavity making it the ideal choice to use in conjunction with Sun's main stage pilot or vent-to-operate cartridges. Separate pilot lines are

eliminated and only one cavity needs to be machined to accommodate both the control and primary function. Note: All 2-position, 2-way pilot stage control

cartridges utilize the same cavity and are physically interchangeable. Functionality is the only consideration.

Note: The main stage valve should first be installed to the correct torque value followed by the T-8A pilot control section into the main stage valve to its required

torque value.

The preferred flow path through the valve is port 2 to port 1.

Different pilot control port options are available. See Option Selection for details.

Hardened spool and sleeve provide consistent operation, low spool leakage rates and superior wear characteristics.

The minimum pilot pressure required to operate the valve is determined by the following formula: pilot pressure = 20 psi + pressure @ Port 1 divided by 100. This

results in a pilot pressure range of 20 to 70 psi. In metric; pilot pressure = 1,4 bar + pressure @ Port 1 divided by 100. This results in a pilot pressure of 1,4 to 5 bar.

All ports will accept 5000 psi (350 bar) with the exception of the pilot port which accepts 500 psi (35 bar) max.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

PERFORMANCE CURVES

RELATED MODELS

DAAPA Model

DAAPB Model

DAAPD Model