c
2021 Sun Hydraulics 1 of 2
MODEL
CXUT
Free flow nose to side check valve - common cavity
SERIES 1C / CAPACITY: 60 L/min. / CAVITY: SC-10-02
(X)CONTROL
X -
(C)CRACKING PRESSURE
C 29 psi (2.0 bar)
A 7 psi (.5 bar)
(N)SEAL MATERIAL
N Buna-N
V Viton
CONFIGURATION
X Control -
C Cracking Pressure 29 psi (2.0 bar)
N Seal Material Buna-N
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the
outlet (port 2) and block flow in the opposite direction.
TECHNICAL DATA
Cavity SC-10-02
Series 1C
Capacity 60 L/min.
Maximum Operating Pressure 250 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.
Valve Hex Size 25,4 mm
Valve Installation Torque 35 - 40 Nm
Seal kit - Cartridge Buna: 99C102007
Seal kit - Cartridge Viton: 99C102006
sunhydraulics.com/model/
CXUT
TECHNICAL FEATURES
This valve will accept 3600 psi (250 bar) at ports 1 and 2.
This Check valve offers an extremely low leakage rate with a maximum leakage of less than 5 drops per minute (0,33 cc/min).
All configurations of this valve include zinc plating as standard.
All configurations of this valve provide 192 hours of corrosion resistance.
PERFORMANCE CURVES
Model Code Example: CXUTXCNCONFIGURATION OPTIONS
c
2021 Sun Hydraulics 2 of 2
