c
2018 Sun Hydraulics Corporation 1 of 1
MODEL
CXEB
Free flow side to nose check valve with Delrin seat
SERIES 2 / CAPACITY: 120 L/min. / CAVITY: T-5A
(X)CONTROL
X Not Adjustable
(C)CRACKING PRESSURE
C 30 psi (2 bar)
A 4 psi (0,3 bar)
B 15 psi (1 bar)
D 50 psi (3,5 bar)
E 75 psi (5 bar)
F 100 psi (7 bar)
Z 1 psi (0,07 bar)
(N)SEAL MATERIAL
N Buna-N
V Viton
MATERIAL/COATING
Standard Material/Coating
/LH Mild Steel, Zinc-Nickel
NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.
Free-flow, side-to-nose check valves are on/off circuit components that allow free flow from the inlet (port 2) to the
outlet (port 1) and block flow in the opposite direction.
TECHNICAL DATA
Cavity T-5A
Series 2
Capacity 120 L/min.
Maximum Operating Pressure 210 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.
Valve Hex Size 28,6 mm
Valve Installation Torque 61 - 68 Nm
Seal kit - Cartridge Buna: 990203007
Seal kit - Cartridge Viton: 990203006
Model Weight 0.16 kg.
snhy.com/
CXEB
TECHNICAL FEATURES
The Delrin seat is suitable for dirty, medium pressure systems that are not subjected to high flows or temperatures.
Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
These check valves are considered circuit savers for existing circuits where manifold drillings are incorrect. The capacity of side-to-nose (port 2 to port 1) 2-port
check valves is approximately 30% less than preferred models with a nose-to-side (port 1 to port 2) flow path.
Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
machining variations.
Model Code Example: CXEBXCNCONFIGURATION OPTIONS
