Created on 12/22/2016

 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2

MODEL

CNGE

Pilot-to-open check valve with bypass orifice

SERIES 3 / CAPACITY: 240 L/min. / CAVITY: T-17A

CONFIGURATION

X Control Not Adjustable

A Setting

Range

4 psi (0,3 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)

N Seal

Material

Buna-N

This valve is a pilot to open check valve with a bypass orifice. It incorporates a sealed pilot, a steel seat, and is

non-vented. It allows free flow from the valve (port 2) to the load (port 1) and restricts flow in the opposite direction.

Pressure at the pilot (port 3) will open the valve from port 1 to port 2. The pilot pressure needed at port 3 to open

the valve is directly proportional to the load pressure at port 1. Pressure at port 2 directly opposes the pilot

pressure. Note: The bypass orifice diameter is specified by the customer. See Technical Data below for the

allowable orifice range. An 'L' control option is available to manually release the load. See Option Selection below.

TECHNICAL DATA

Cavity T-17A

Series 3

Capacity 240 L/min.

Pilot Ratio 3:1

Maximum Operating Pressure 350 bar

Orifice Range 0,4 - 5,5 mm

Valve Hex Size 31,8 mm

Valve Installation Torque 203 - 217 Nm

Seal kit - Cartridge Buna: 990017007

Seal kit - Cartridge Polyurethane: 990017002

Seal kit - Cartridge Viton: 990017006

Model Weight 0.53 kg.

(X)CONTROL

X Not Adjustable

(A)SETTING RANGE

A 4 psi (0,3 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)

B 15 psi (1 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)

C 30 psi (2 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)

D 50 psi (3,5 bar) Cracking Pressure,

.016 - .218 in. (0,4 - 5,5 mm)

E 75 psi (5 bar) Cracking Pressure, .016 -

.218 in. (0,4 - 5,5 mm)

F 100 psi (7 bar) Cracking Pressure, .016

- .218 in. (0,4 - 5,5 mm)

(N)SEAL MATERIAL

N Buna-N

V Viton

snhy.com/CNGE

TECHNICAL FEATURES

Model Code Example: CNGEXANCONFIGURATION OPTIONS

Created on 12/22/2016

 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 2

This 3 port pilot-to-open check valve and 3 port counterbalance valves are physically interchangeable (i.e. same cavities, same flow path for a given frame size).

However, cartridge extension dimensions from the mounting surface may vary.

Sealed pilot for use in circuits where cross port leakage is undesirable.

The customer specified orifice diameter is stamped on one of the cartridge's hex faces.

For models with manual load release control option, turn load release clockwise to release load.

Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge

machining variations.

PERFORMANCE CURVES