A
www.stauff.com/10/en/#19 19
Temperature Sensor
Type TS-SNA/SNK-PT100
Dimensions
A B
89 (3.50)
20
(.79)
M12
M12
6
(.24)
TS-SNA/SNK-PT100
Order Codes
a Type
Temperature Sensor PT100 TS-SNA/SNK-PT100
Connection Details and Electrical Functions
Four-pin circular connector M12,
A-coded, according to IEC 61076-2-101
SW 16 (Hex .63)
M12
6
(.24)
14
(.55)
SW 16 (Hex .63)
2
4
1
3
Pin Assignment
1
2
3
4
Dimensional drawings: All dimensions in mm (in).
Dimensions
(mm
/
in)
A B
In conjunction with Level Gauge SNA
43,5 45,5
1.71 1.79
In conjunction with Level Gauge SNK
51 38
2.01 1.50
In conjunction with Level Gauge SNKK
51 38
2.01 1.50
Technical Data
§ Operating temperature range (for the connector area):
-25 °C ... +80 °C / -13 °F ... +176 °F
§ IP 68 protection rating: Dust tight and protected against
powerful water jets; even immersion (beyond 1 m / 3.28 ft)
in water is possible under dened conditions of pressure
and time
Accessories / Options
§ Deutsch Adaptor Cable
Please see page 20 for details.
Characteristics
Fluid temperature measurement in conjunction with
STAUFF Level Gauges SNA, SNK and SNKK; Analysis of
signals with required equipment, simply connect to your
on board control unit or PLC.
Installation
§ Replaces the lower banjo bolt of the Level Gauge
§ Available for bolt size M12 only
§ Clearance hole: Ø13 mm / Ø.51 in
Materials
§ Metal parts (including all uid-affected parts) made
of Stainless Steel V2A (1.4305)
Electrical Specications
§ Measuring temperature range:
-40 °C ... +150 °C / -40 °F ... +302 °F
§ Platinum measuring element PT100 according to
DIN EN 60751, class A
§ Accuracy: ±(0,15 K + 0,002 x
|
t
|
)
§ Max. contact current: 2,0 mA
§ Equipped with four-pin circular connector M12
with gold-plated contacts
§ Power supply 20...32V DC
Temperature Sensor with Direct Installation Set
Type TS-SNA/SNK-PT100-T
Characteristics
Direct uid temperature measurement without STAUFF
Level Gauges SNA, SNK and SNKK; Analysis of
signals with required equipment, simply connect to your
on board control unit or PLC.
Installation
§ Direct installation to the outer wall of
the hydraulic reservoir or gearbox
§ Compact design and easy installation
§ Clearance hole: Ø13 mm / Ø.51 in
max. 8
(.31)
Order Codes
a Type
Temperature Sensor PT100 TS-SNA/SNK-PT100
b Direct Adaptor
Direct installation set including M12
screw nut, gasket, front ring and O-ring
T
c Sealing Material
NBR (Buna-N®) (standard option) B
FKM (Viton®) V
EPDM E
The direct installation set can also be used in
conjunction with Thermo Switches TS (see page 18).
Please contact STAUFF for further information.
TS-SNA/SNK-PT100 - T - B
28
(1.10)
61
(2.40)
SW 18 (Hex .71)
Materials
§ Fluid-affected parts made of Stainless Steel V2A (1.4305)
§ M12 screw nut made of Steel, zinc-plated
§ Front ring made of Stainless Steel V2A (1.4305)
§ O-ring and gasket made of NBR (Buna-N®)
(standard option), FKM (Viton®) or EPDM
Please see top of this page for Technical Details and
Electrical Specications for the Temperature Sensor.
Accessories / Options
§ Deutsch Adaptor Cable
Please see page 20 for details.
Catalogue 10
§
Edition 08/2019
Fluid Level and Temperature Indicators