The Covers CVC*SDE are designed to hold Polyhydron make 2 port slip-in cartridge
valves model CV*** in the cavities machined as per ISO 7368, with built in facility to control
the operation of the cartridge valve as under,
Refering to the circuits shown below , the built-in Shuttle valve in the cover selects higher
of the pilot pressures brought to the cover at its ports X and Z1 and admits it to the port P
of the Directional Control Valve mounted on the cover.
In case of use of cover model CVC*SDEA, in de-energised condition of the Sol. Directional
control valve mounted on the cover, the port A, which is normally connected to port P
through the valve , gets directly connected to the control port C on the cartridge interface,
thereby keeping the cartridge valve normally closed . Upon energizing the Solenoid, the
control port C gets connected to tank via the Directional Control Valve and therefore the
cartridge passage opens. In this configuration of the cover, port B of the Solenoid operated
Directional Control Valve is available at port Z2 on the cover for actuation of other
cartridge/s.
In case of use of cover model CVC*SDEB, in de-energised condition of the Sol. Directional
control valve mounted on the cover , the port B , which is normally connected to port T
through the valve, gets directly connected to the control port C on the cartridge interface,
thereby keeping the cartridge valve normally opened. Upon energizing the Solenoid, the
control port C gets connected to pressure via the Directional Control Valve and therefore
the cartridge passage closes. In this configuration of the cover , port A of the Solenoid
operated Directional Control Valve is available at port Z2 on the cover for actuation of
other cartridge/s.
A Polyhydron Group Company
Description
Hydraulic symbol
COVER WITH BUILT IN SHUTTLE VALVE
FOR FITTING DIRECTION CONTROL VALVE
Model : CVC*SDE
Ref. No. D 03477
Release 11 / 2014
ENGINEERING - 1 of 2
78-80, Machhe Industrial Estate,
Machhe, Belgaum - 590 014. INDIA.
Phone : +91-(0)831- 2411001
Fax : +91-(0)831- 2411002
E-mail : polyhydron@gmail.com
Website : www.polyhydron.com
Mounting interface : As per ISO 7368
Working pressure : 350 bar.
Hydraulic medium : Mineral oil.
Temperature range : -20°C to + 80°C.
Viscosity range : 10 cSt to 380 cSt.
Fluid cleanliness required : ISO 4406 20/18/15 or better.
Technical specifications
Section
B
A
Z2
C
Y
P
Z1
X
CVC*SDEA
Z2C Y
Z1X
T
CVC*SDEB
B
A
P
T
B
A
B
A
Z1
P T
Y
C
X Z2
A
B
A/B A/B