2014/02 – Subject to change
5
Internet: www.festo.com/catalogue/...
Hand slide valves VBOH
Technical data
Function
-M-Standard nominal flow rate
236 … 7,691 l/min
-Q- Temperature range
–10…+80°C
-L- Operating pressure
–0.95…+12bar
Hand slide valves VBOH are used as a
shut-off function for pressurising and
exhausting compressed air systems,
for example upstream of service unit
combinations, for air guns and also for
exhausting pneumatic cylinders.
• Non-overlapping, so no pressure
losses when switching
• Minimal installation
• High flow rate and operating
pressure
• Exclusive design
General technical data
Pneumatic connection 1 M5 Gx G¼ Gy G½ G¾
Pneumatic connection 2 M5 Gx G¼ Gy G½ G¾
Grid dimension [mm] 17 24 31 39.5 45 57.5
Nominal size [mm] 3.6 5.7 8.4 9.9 12.1 19.3
Design Sleeve valve
Valve function 3/2-way, double solenoid
Actuation type Manual
Actuating force [N] 14 17 45 41 37 70
Type of mounting Screw-in
In-line installation
Mounting position Any
Sealing principle Soft
Type of control Direct
Flow rate characteristics
Pneumatic connection 1 M5 Gx G¼ Gy G½ G¾
Standard nominal flow
rate qnN
1)
[l/min] 236 777 1,675 2,201 3,420 7,691
1) Measured at p1 = 6 bar and p2 = 5 bar , Δp = 1 bar
Operating and environmental conditions
Operating pressure [bar] –0.95 … +12
Operating medium Compressed air according to ISO 8573-1:2010 [7:4:4]
Note on operating/pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Ambient temperature [°C] –10 … +80
Temperature of medium [°C] –10 … +80
Corrosion resistance class CRC
1)
2
1) Corrosion resistance class 2 acc ording to Festo standard 940 070
Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are i n direct contact with a normal industrial environment or media such as coolants or
lubricating agents.