Page 1 |

AVENTICS

Pressure regulator, Series MU1-RGS

- G 2

- Qn = 50000 l/min

- Standard pressure regulator

- Activation pneumatically

- suitable for ATEX

Parts Pressure regulator

Mounting orientation Any

Certificates suitable for ATEX

Working pressure min./max. 0,5 ... 25 bar

Control pressure min./max. 16 bar

Ambient temperature min./max. -10 ... 80 °C

Medium temperature min./max. -10 ... 80 °C

Medium Compressed air Neutral gases

Regulator type Diaphragm-type pressure regulator

Regulator function withrelieving air exhaust

Adjustment range min./max. 0,5 ... 16 bar

Pressure supply single

Activation pneumatically

Weight 4,68 kg

Technical data

Part No. Port

Flow

Qn

R412006578 G 2 50000 l/min

Nominal flow Qn with secondary pressure p2 = 6 bar at Δp = 1 bar, Suitable for use in Ex zones 1, 2, 21, 22.

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .

Mounting type: for installing in piping

Suitable for use in Ex zones 1, 2, 21, 22.

Technical information

Material

Housing Die-cast aluminum

Seals Acrylonitrile butadiene rubber

Page 2 |

AVENTICS

Dimensions

1) Pilot connection

2) Pressure gauge connection P1

3) Pressure gauge connection P2

Dimensions

A1 A2 A4 B ±5 C ±5 D ±5 E ±7 J ±5 L T1 T2 T4

G 2 G2 G 1/4 160 90 107 197 160 G 1/4 30 30 9.5

PDF creation date: 01.12.2020

Page 3 |

AVENTICS

Diagrams

Pressure characteristics curve

p1 = working pressure

p2 = secondary pressure

q = flow rate

* starting point

PDF creation date: 01.12.2020

Page 4 |

AVENTICS

Diagrams

Flow rate characteristic (secondary range p2: 0.5 - 10 bar)

p1 = Working pressure

p2 = Secondary pressure

qn = Nominal flow

PDF creation date: 01.12.2020

Page 5 |

AVENTICS

Circuit diagram

Application example

1) precision pressure regulator

2) pressure regulator valve, pneumatically operated

PDF creation date: 01.12.2020

Efficient pneumatic solutions, our program:

cylinders and drives, valves and valve systems,

air supply management

Visit us: Emerson.com/Aventics

Your local contact: Emerson.com/contactus

Emerson.com

Facebook.com/EmersonAutomationSolutions

LinkedIn.com/company/Emerson-Automation-Solutions

Twitter.com/EMR_Automation

An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This

Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be

reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product

documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When

integrating the product into applications, note the system manufacturer's specifications for safe use of the product. The data specified only serve to

describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.

The information given does not release the user from the obligation of own judgement and verification. It must be remembered that the products are

subject to a natural process of wear and aging.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one

2020-12