Page 1 |

AVENTICS

Standard oil-mist lubricator, Series

MU1-LBS

- G 2

- Nominal flow Qn 25000 l/min

- suitable for ATEX

Type Oil-mist lubricator

Parts Standard oil-mist lubricator

Mounting orientation vertical

Certificates suitable for ATEX

Compressed air connection G 2

Working pressure min./max. 0,5 ... 16 bar

Ambient temperature min./max. -10 ... 60 °C

Medium temperature min./max. -10 ... 60 °C

Medium Compressed air Neutral gases

Lubricator reservoir volume 1700 cm³

Type of filling Manual oil filling

Weight 3,37 kg

Technical data

Part No. Port Nominal flow Qn Material Reservoir Protective guard

R412006581 G 2 25000 l/min Polycarbonate Steel

Suitable for use in Ex zones 1, 2, 21, 22., Nominal flow with secondary pressure 6.3 bar at Δp = 1 bar

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .

Mounting via 2 through-holes in housing

Manual oil filling possible during operation.

Suitable for use in Ex zones 1, 2, 21, 22.

Oil dosing at 1000 l/min 1-2 drops

Technical information

Material

Housing Die-cast aluminum

Seals Acrylonitrile butadiene rubber

Reservoir Polycarbonate

Protective guard Steel

Page 2 |

AVENTICS

Dimensions

A1 A2 B ±7 D ±7 E ±7 H I J1 J3 T2 V ±5 W ±7

G 2 G 2 150 383 436 120 10.5 130 50 24 41 459

PDF creation date: 01.12.2020

Page 3 |

AVENTICS

Diagrams

Flow rate characteristic

p1 = working pressure

qn = nominal flow

PDF creation date: 01.12.2020

Page 4 |

AVENTICS

Diagrams

minimum flow rate curve (flow rate necessary for the correct functioning of the lubricator)

p1 = working pressure

qn = nominal flow

PDF creation date: 01.12.2020

Efficient pneumatic solutions, our program:

cylinders and drives, valves and valve systems,

air supply management

Visit us: Emerson.com/Aventics

Your local contact: Emerson.com/contactus

Emerson.com

Facebook.com/EmersonAutomationSolutions

LinkedIn.com/company/Emerson-Automation-Solutions

Twitter.com/EMR_Automation

An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This

Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be

reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product

documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When

integrating the product into applications, note the system manufacturer's specifications for safe use of the product. The data specified only serve to

describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.

The information given does not release the user from the obligation of own judgement and verification. It must be remembered that the products are

subject to a natural process of wear and aging.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one

2020-12