Page 1 |

AVENTICS

Filter, Series MU1-FLS

- G 1 1/2 G 2

- filter porosity 8 60 µm

- suitable for ATEX

Type Standard filter

Parts Filter

Mounting orientation vertical

Certificates suitable for ATEX

Working pressure min./max. See table below

Ambient temperature min./max. -10 ... 60 °C

Medium temperature min./max. -10 ... 60 °C

Medium Compressed air Neutral gases

Filter reservoir volume 300 cm³

Filter element exchangeable

Condensate drain See table below

Weight 3,5 kg

Technical data

Part No. Port filter porosity Flow Qn Working pressure min./max.

R412000667 G 1 1/2 8 µm 30000 l/min 0 ... 16 bar

R412006568 G 2 60 µm 30000 l/min 0 ... 16 bar

R412006570 G 2 60 µm 30000 l/min 2 ... 12 bar

R412006571 G 2 8 µm 30000 l/min 2 ... 12 bar

Part No. Condensate drain

R412000667 Manual

R412006568 Manual

R412006570 fully automatic, open without pressure

R412006571 fully automatic, open without pressure

Part No. Version

R412000667 reservoir, polycarbonate, with metal protective guard

R412006568 reservoir, polycarbonate, without protective guard

R412006570 Metal reservoir without window

R412006571 Metal reservoir without window

Suitable for use in Ex zones 1, 2, 21, 22., Nominal flow Qn with secondary pressure p2 = 6 bar at Δp = 1 bar, Metal protective guard

can be retrofitted for all polycarbonate reservoirs

Page 2 |

AVENTICS

The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .

Mounting via 2 through-holes in housing

Suitable for use in Ex zones 1, 2, 21, 22.

Technical information

Material

Housing Die cast zinc

Seals Acrylonitrile butadiene rubber

Reservoir Polycarbonate

Protective guard Steel

Filter insert Polyethylene

PDF creation date: 01.12.2020

Page 3 |

AVENTICS

Dimensions

1) manual condensate drain

2) fully automatic condensate drain

Dimensions

A1 A2 A7 B ±7 D ±7 E ±7 H I J1 J3 T2 T7 V ±5 W ±7

G 1 1/2 G 1 1/2 G 1/8 150 383 424 120 10.5 131 50 24 8.5 41 441.5

G 2 G 2 G 1/8 150 400.5 452 120 10.5 131 50 24 8.5 41 464.5

PDF creation date: 01.12.2020

Page 4 |

AVENTICS

Diagrams

Flow rate characteristic

p2 = secondary pressure

qn = nominal flow

PDF creation date: 01.12.2020

Efficient pneumatic solutions, our program:

cylinders and drives, valves and valve systems,

air supply management

Visit us: Emerson.com/Aventics

Your local contact: Emerson.com/contactus

Emerson.com

Facebook.com/EmersonAutomationSolutions

LinkedIn.com/company/Emerson-Automation-Solutions

Twitter.com/EMR_Automation

An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. This

Document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS GmbH. It may not be

reproduced or given to third parties without its consent. Only use the AVENTICS products shown in industrial applications. Read the product

documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When

integrating the product into applications, note the system manufacturer's specifications for safe use of the product. The data specified only serve to

describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information.

The information given does not release the user from the obligation of own judgement and verification. It must be remembered that the products are

subject to a natural process of wear and aging.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand logotype are registered trademarks of one

2020-12