Standard oil-mist lubricator, Series NL2-LBS

0821301408

2024-04-23

AVENTICS Series NL2 Air Preparation

Units

The AVENTICS Series NL maintenance units are suitable

for all areas: as individual components or as assembled

maintenance units, for centralized or decentralized

compressed air preparation, in compact or powerful

versions, for use in high or low temperatures. This

line offers a complete, customizable compressed air

preparation technology. It includes an option to combine

every component in the Series to achieve the desired

function, making it possible to adjust the components

precisely to the application requirements.

Technical data

Industry Industrial

Parts Lubricator

Reservoir reservoir, PA, without protective guard

Lubricator version with level indicator

Compressed air connection G 1/4

Nominal flow Qn 1800 l/min

Mounting orientation vertical

Min. working pressure 0.5 bar

Max. working pressure 16 bar

Min. ambient temperature -10 °C

Max. ambient temperature 60 °C

Medium Compressed air

Neutral gases

Type of filling Manual oil filling

Lubricator reservoir volume 50 cm³

Electrical level indicator with internal query

Oil dosing at 1000 l/min 1-2 drops

Function Oil-mist lubricator

Function Can be assembled into blocks

Weight 0.37 kg

Standard oil-mist lubricator, Series NL2-LBS

0821301408

2024-04-23

Material

Housing material Die cast zinc

Material front plate Acrylonitrile butadiene styrene

Seal material Acrylonitrile butadiene rubber

Material reservoir Polycarbonate

Part No. 0821301408

Technical information

The pressure dew point must be at least 15 °C less than ambient and medium temperature and

may not exceed 3 °C.

The entire preset drip quantity enters the pressure system.

Manual oil filling possible during operation.

Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be

found at "Customer information".

A change in the flow direction (from air supply on the left to air supply on the right) occurs by

rotating installation by 180° about the vertical axis. Please see the operating instructions for further

details.

Nominal flow Qn with secondary pressure p2 = 6 bar at Δp = 0,1 bar

Fig. 2

A1 = input A2 = output

1) electrical level indicator – connection: 4-pin, M12x1 – contact load: 50 V AC/0.5 A/5 W – type: 1 change-over contact (make contact/break contact) for

min. fluid level

Order valve plug connector (M12x1) separately

Standard oil-mist lubricator, Series NL2-LBS

0821301408

2024-04-23

Dimensions in mm

Part No. A1 A2 A7 B B1 C D H I

0821301408 G 1/4 G 1/4 M12x1 48 1.5 58 109 36 4.4

Part No. J K M O R T T2 T7 U

0821301408 47 43.5 3 38 5.4 8 9.5 12 27.5

Part No. V W1

0821301408 12.3 52

Fig. 1

A1 = input A2 = output

Dimensions in mm

Part No. A1 A2 B B1 C C1 D E E1

0821301400 G 1/4 G 1/4 48 1.5 58 - 109 167 -

0821301401 G 1/4 G 1/4 48 1.5 58 - 109 167 -

0821301402 G 1/4 G 1/4 48 1.5 73.5 73,5 109 182 182

0821301440 G 3/8 G 3/8 48 1.5 58 - 109 167 -

0821301441 G 3/8 G 3/8 48 1.5 58 - 109 167 -

0821301442 G 3/8 G 3/8 48 1.5 73.5 73,5 109 182 182

Standard oil-mist lubricator, Series NL2-LBS

0821301408

2024-04-23

Part No. H I J K M O R T T2

0821301400 36 4.4 47 43.5 3 38 5.4 8 9.5

0821301401 36 4.4 47 43.5 3 38 5.4 8 9.5

0821301402 36 4.4 47 43.5 3 38 5.4 8 9.5

0821301440 36 4.4 47 43.5 3 38 5.4 8 6

0821301441 36 4.4 47 43.5 3 38 5.4 8 6

0821301442 36 4.4 47 43.5 3 38 5.4 8 6

Part No. U V W1

0821301400 27.5 12.3 52

0821301401 27.5 12.3 52

0821301402 27.5 12.3 52

0821301440 27.5 12.3 52

0821301441 27.5 12.3 52

0821301442 27.5 12.3 52

Flow rate characteristic, p2 = 0,05 - 7

bar

p2 = secondary pressure qn = nominal flow

minimum flow rate curve (flow rate

necessary for the correct functioning

of the lubricator)

p2 = secondary pressure qnmin. = min. nominal flow