Q
Parker SensoControl
®
Test Points
Q11 Catalogue 4100/UK
*Please add the suffixes
below according to the material/
surface required.
Weight PN (bar)1)
T1
L1
L2 max. S1 S2 g/1 piece Order code* CF DF**
G 1/4 54.0 12 19 19 74 MAV1/4MA3 630 4.0
G 1/2 64.0 12 27 19 129 MAV1/2MA3 630 4.0
G 1/4 49.0 19 61 MAVMD1/4MA3 630 4.0
G 1/2 51.5 27 103 MAVMD1/2MA3 630 4.0
200.0 73 SMA3-200 630 2.5
300.0 74 SMA3-300 630 2.5
400.0 74 SMA3-400 630 2.5
630.0 79 SMA3-630 630 2.5
800.0 83 SMA3-800 630 2.5
1000.0 87 SMA3-1000 630 2.5
1500.0 95 SMA3-1500 630 2.5
2000.0 105 SMA3-2000 630 2.5
2500.0 110 SMA3-2500 630 2.5
3200.0 125 SMA3-3200 630 2.5
4000.0 137 SMA3-4000 630 2.5
**DF = Design Factor
1
) Pressure shown = item deliverable
PN (bar)
= PN (MPa)
10
MAV…MA3 Test point pressure gauge connector with threaded connection M 16×2
MAVMD…MA3 Test point with threaded connection M 16×2
SMA3 Test point high pressure hose with threaded connection M 16×2 Series 3
*Sealing rings according to (DIN) EN 837-1 for steel design of cop-
per, for stainless steel design of stainless steel.
Note hoses with small diameter:
– Min. bending radius r = 20 mm
– Working temperature –20 °C up to 100 °C (short time to +120 °C)
– Hoses are to be protected from re, from sharp-corners and hot
objects.
Temperature factor of pressure rating:
up to 0 °C 122 %
for 30 °C 110 %
for 50 °C 100 %
for 80 °C 86 %
for 100 °C 77 %
For measuring with liquid pressure media please note:
Bleed before connecting tube! By capillary action discharge of the pressure
medium is prevented widely.
Female thread: BSP
Sealing: sealing ring (DIN) EN 837-1*
Test hose:
SMA3
Pressure gauge connector: Gauge-Direct-Connector:
MAV…MA3 MAVMD…MA3
Order code sufxes
Material
Sufx
surface
and material
Example
Standard sealing
material (no additonal.
sufx needed)
Steel CF MAV1/4MA3CF NBR