Directional Control Valve
Series D1MW
2-33
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
Characteristics
General
Design Directional spool valve
Actuation Solenoid
Size DIN NG06 / CETOP 03 / NFPA D03
Mounting interface DIN 24340 A6 / ISO 4401 / CETOP RP 121-H / NFPA D03
Mounting position Unrestricted, preferably horizontal
Ambient temperature [°C] -25...+60
MTTF
D
value [years] 150
Weight [kg] 1.5 (1 solenoid), 2.1 (2 solenoids)
Vibration resistance [g]
10 Sinus 5...2000 Hz acc. IEC 68-2-6
30 Random noise 20...2000 Hz acc. IEC 68-2-36
15 Shock acc. IEC 68-2-27
Hydraulic
Max. operating pressure [bar] P, A B: 350; T: 210
Fluid Hydraulic oil according to DIN 51524
Fluid temperature [°C] -20 ... +70 (NBR: -25...+70)
Viscosity permitted [cSt] / [mm²/s] 2.8...400
Viscosity recommended [cSt] / [mm²/s] 30...80
Filtration ISO 4406; 18/16/13
Flow max. [l/min] 80 (see shift limits)
Leakage at 50 bar [ml/min] Up to 10 per ow path, depending on spool
Static / Dynamic
Step response at 95 % [ms]
Energized: 32
De-energized: 40
Electrical characteristics
Duty ratio 100 % ED; CAUTION: coil temperature up to 150 °C possible
Max. switching frequency [1/h] 15000
Protection class
Standard (as per EN175301-803) IP65 acc. EN60529 (w. corr. mount. plug-in connector)
AMP Junior Timer IP67 in acc. with EN60529 (with correctly mounted plug-in connector)
DT04-2P “Deutsch” IP69K (with correctly mounted plug-in connector)
Code K J
Supply voltage [V] 12 V = 24 V =
Tolerance supply voltage [%] ±10 ±10
Current consumption hold [A] 2.72 1.29
Power consumption hold [W] 32.7 31
Solenoid connection
Connector as per EN 175301-803 (code W), AMP Junior Timer (code A),
DT04-2P “Deutsch“ connector (code J). Solenoid identication as per ISO 9461.
Wiring min. [mm²] 3 x 1.5 recommended
Wiring length max. [m] 50 recommended
Technical data
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
With AMP Junior Timer
The D1MW is based on the D1VW series of directional
control valves size NG06, but oers additional corrosion
protection of the valve body, the solenoid coil and the
anchor tube as well as the typical solenoid con nections
for the mobile market such as AMP Junior Timer and
DT04-2P “Deutsch”.
Technical features
• High corrosion protection (optional)
• Solenoid connection:
- Standard (as per EN175301-803)
- AMP Junior Timer
- DT04-2P “Deutsch”
• Robust design for rough applications
• Extended manual override with rubber cover (optional)
Connector DT04-2P “Deutsch”
Directional Control Valve
Series D1MW
2-34
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
Ordering Code
Directional
control
valve
Wet pin
armature
solenoid,
threaded
in tube
3-chamber
valve for
mobile and
marine
applications
Spool
position
Spool
type
Size
DIN NG06
CETOP 03
NFPA D03
3 position spools
Code Spool position
C
3 positions.
Spring oset in position “0“.
Operated in position “a“ or “b“.
Standard
Spool type
008, 009, 204, 205
E
Operated in
position “a“.
Operated in
position “b“.
2 positions.
Spring oset in position “0“.
F
Spring oset in
position “b“.
Spring oset in
position “a“.
2 positions.
Operated in position “0“.
K
Operated in
position “b“.
Operated in
position “a“.
2 positions.
Spring oset in position “0“.
M
Spring oset in
position “a“.
Spring oset in
position “b“.
2 positions.
Operated in position “0“.
2 position spools
Code Spool position
Standard Spool type 083
B
2 positions.
Spring oset in position “b“.
Operated in position “a“.
D
—
2 positions.
Operated in position “a“ or “b“.
No center or oset position.
H
2 positions.
Spring oset in position “a“.
Operated in position “b“.
1)
Consider specic spool position.
2)
Not for spool position code “D”.
3)
Please order plug separately.
4)
Only in combination with connection “J” and “W”.
D 1 WM
3 position spools
Code Spool type
a 0 b
001
002
003
004
005
006
007
008
1)
009
1)
010
011
014
015
016
021
022
031
032
034
035
061
081
082
102
204
1)
205
1)
2 position spools
Code Spool type
a b
020
026
030
083
1)
101
208
2)
Directional Control Valve
Series D1MW
2-35
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
Ordering Code
Other spool types on request.
Solenoid
options
Connection Design
series
(not required
for ordering)
Solenoid
voltage
Surface
protection
Code Solenoid option
omit
manual override
(Standard)
T
without manual
override
W
extended manual
override with rubber
cover
Code Solenoid voltage
K 12 V =
J 24 V =
Code Connection
W
3)
Connector as
per EN 175301-803
J
3)
Connector
DT04-2P “Deutsch“
A
3)
2-pin AMP
Junior Timer
Code Surface protection
omit
Standard, only for
connection “J“ and
“A“
1P
4)
Anti corrosion
coating acc. to DIN
EN ISO 9227 NSS,
200 h for extreme
conditions.
Seals
Code Seals
N NBR
V FPM
Directional Control Valve
Series D1MW
2-36
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
Performance Curves
Flow curves
Position “b” Position “a” Position “0”
Spool P-A B-T P-B P-B A-T P-A P-A P-B A-T B-T P-T
001 2 2 2 2
002 1 4 1 4 1 1 5 5 2
003 3 4 3 6 7
004 2 3 2 3 7 7
005 2 2 2 2 12
006 1 4 1 4 7 7
007 3 2 2 2 3 2 7
010 3 3
011 2 2 2 2 14 14
014 3 2 2 2 3 2 7
015 3 6 3 4 7
016 2 2 2 2 12
020B 4 4 2 3
026B 4 4
030B 2 3 1 2
034 4 8 3 3 5 7
035 3 3 4 8 7 5
081 13 13 13 13
082 13 13 13 13
1) 1)
101B 11 10 10 9
102 1 4 1 4 5 5 8 8 6
61 1 3 1 3 3 2
83H 5 2 5 2
208 3 2
P-B A-T P-A B-T P-A P-B A-T B-T P-T
008 4 5 4 5 9
009 5 5 6 7 7
83B 5 2 5 2
204 1 3 4 3 7 4 7
205 4 3 1 3 7 4 5
Position “b” Position “a”
Spool P-A P-B A-B P-B A-T
021 2 4 4 2
P-A B-T P-A P-B A-B
022 6 2 5 2
1
2
3
4
5
6
7
89
13
14
Flow [l/min]
Pressure drop [bar]
0
4
8
12
16
20
02
06
040 80
24
12
10
11
All characteristic curves measured with HLP46 at 50 °C.
1)
Only for pressure compensation, no high ow possible.
Directional Control Valve
Series D1MW
2-37
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
The diagram below species the shift limits for valves
with DC & AC solenoids. Valves with spool position “F”
or “M” can only be operated up to 70 % of the limits. The
specications apply to a viscosity of 40 mm
2
/s and bal-
anced ow conditions. The shift limits can be considerably
lower at unbalanced ow conditions. To avoid ow rates
beyond the shift limits, a plug-in orice can be inserted
in the P-port.
Shift limits, DC voltage
Shift Limits
Measured with HLP46 at 50 °C, 90 % U
nom
and warm solenoids
Directional Control Valve
Series D1MW
2-38
D1MW UK.indd 25.03.24
Catalogue MSG11-3500/UK
Parker Hannin Corporation
2
Dimensions
Dimensions with EN 175301-803 Connector
B, E, F -style H, K, M -style
C and D -style
Dimensions with 2pin AMP Junior Timer Connector (only C and D -style shown)
Dimensions with “Deutsch“ DT04-2P Connector (only C and D -style shown)
The space necessary to remove the plug per EN 175301-803, design type AF is at least 15 mm.
The torque for the screw M3 of the plug has to be 0.5 to 0.6 Nm.
Surface nish
BK375
4x M5x30
ISO 4762-12.9
7.6 Nm
±15 %
NBR: SK-D1VW-N-91
FPM: SK-D1VW-V-91
Ø5.5
Ø9.5
226
46
91.4
22
254 (manual override
with rubber cover)
AB
67
46
69
93
91.4
162
Ø5.5
Ø9.5
22
176 (manual override
with rubber cover)
AB
Ø5.5
Ø9.5
46
69
93
226
91.4
22
254 (manual override
with rubber cover)
AB
162
Ø5.5
Ø9.5
134.6
22
46
69
93
176 (manual override
with rubber cover)
AB