7-47
CPOM.PMD CM
Pilot-Operated Check Valve
Series CPOM
Catalogue HY11-2500/UK
7
Parker Hannifin GmbH & Co. KG
Hydraulic Controls Division
Kaarst, Germany
Characteristics
Characteristics
DIN
NG6 NG10 NG16 NG25
Port
size
Mounting pattern ISO 4401
Series
Working pressure
Opening pressure
Control ratio
Weight [kg]
CPOM2
350 bar
1.0 bar
1 : 3 or
1 : 7
1.8
CPOM3
350 bar
0.8 bar
1 : 3 or
1 : 6.5
4.0
CPOM4
350 bar
0.5 bar
1 : 2.4
7.4
CPOM6
210 bar
0.4 bar
1 : 3
9.5
CPOM4 / CPOM6
Pilot-operated check valves from the Parker Manapak
series CPOM are sandwich plate valves designed for
stacking beneath a directional valve with a standardised
mounting pattern. Depending on the function required,
one or two pilot-operated check valves are arranged in
the ports A and/or B. The free flow direction is always
from the valve side to the manifold side.
CPOM2 / CPOM3
CPOM3
Features
• The valve bodies of the Parker Manapak valve series
CPOM are made of steel.
• The valve poppet is precisely guided into the steel
sleeve and ensures a good seal on the seat. This
metallic sealing configuration is subject to the criteria
as a result of metallic line contact and operational
wear.
• When the valve poppet is open, the large cross-sec-
tion allows high flow rates at low differential pressure.
• Different control ratios can be chosen with the NG6
and NG10 valves.
Function
The check valves open when flowing to the consumer
side, where the opposing check valve is hydraulically-
mechanically pilot-operated simultaneously by a control
spool, and thus the return flow is enabled from other con-
sumer sides.