Hydraulics
B11
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio 44035 USA
Proportional Pressure Reducing Valves
Catalog HY14-2550/US
PE-PC.p65, dd, an
BB
General Description
The PE and PC series proportional pressure reducing
valves have a proportional solenoid operated pilot
stage and sliding spool main stage.
The power supply voltage and input command signals
are connected via a single seven-pin electrical plug
connector. Input command signals can be in the range
0 to 10V or 0 to 20mA, selected in the valve ordering
code. Ramp times for increasing and decreasing pres-
sure can be independently set by two potentiometers.
MIN and MAX potentiometers allow the setting of the
minimum pressure and the maximum pressure. These
can be adjusted to scale the pressure range to corre-
spond to the full range of the command input signal.
Features
•
Standard DIN/ISO interfaces.
•
Integrated valve electronics.
•
Optional reverse flow check valve.
Technical Information Series PE and PC
B
Y
A
Specifications
Interface DIN NG10 NG25 NG32
ISO/CETOP 05 08 10
Nominal Flow Q LPM (GPM) 150 (40) 250 (66) 350 (92)
Weight kg (lbs.) 5.5 (11.7) 6.5 (14.3) 11.0 (24.3)
Maximum Bar (PSI) Pressure port A, B:
Operating Pressure 350 (5075);
Tank connection Y:
not pressurized
Adjustment Range Bar (PSI) 10 to 350 (150 to 5075)
Mounting Pattern DIN 24340 Form D
ISO 5781 and ISO 6264
Mounting Orientation Any
Supply Voltage Range VDC 14.5 to 30
Ripple in the
Supply Voltage % 5 maximum
Current Consumption Amps 2.8 maximum
Command Signal (Impedence) 0 to 10V (10K ohms)
(Select by ordering code) 0 to 20mA (500 ohms)
Reference Output +10V/max. 10mA
Adjustment Range
of the Ramp Time 0 to 5 S
Ambient Temperature Range -40°C to +70°C
(-40°F to +158°F)
Recommended Cable 18 gauge, shielded,
up to 15m (50 ft.)
Protection Class IP54 (NEMA 1)
7-Pin Plug (Main Connection) 5004072