Catalog HY15-3501/US
Flow Divider/Combiner Valve
Series FDC101
FC44
Check
Valves
Shuttle
Valves
Load/Motor
Controls
Flow
Controls
Pressure
Controls
Logic
Elements
Directional
Controls
Manual
Valves
Proportional
Valves
Coils &
Electronics
Technical
Data
SH
CV
LM
FC
PC
LE
DC
MV
SV
PV
CE
BC
TD
Bodies &
Cavities
Solenoid
Valves
Parker Hannifin Corporation
Hydraulic Cartridge Systems
Technical Information
Dimensions
Millimeters (Inches)
THIRD-ANGLE
PROJECTION
Ordering Information
Seals Body
Material
Port
Size**
Code Seals / Kit. No.
Omit Nitrile / (SK10-4N)
V Fluorocarbon / (SK10-4V)
Code Body Material
Omit Steel
A Aluminum
10 Size
Pressure
Compensated Flow
Control
FDC101
Flow
Division
* Add “A” for aluminum, omit for steel.
† Steel body only.
Code Port Size Body Part No.
Omit Cartridge Only
6P 3/8″ NPTF (B10-4-*6P)
6T SAE-6 (B10-4-*6T)
8T SAE-8 (B10-4-*8T)
6B 3/8″ BSPG (B10-4-6B)†
Code Flow Division
A11 3.80 LPM (1 GPM) min. inlet
11.3 LPM (3 GPM) max. inlet
50% ‘4’ Port and 50% ‘2’ Port
A33 11.3 LPM (3 GPM) min. inlet
22.5 LPM (6 GPM) max. inlet
50% ‘4’ Port and 50% ‘2’ Port
A44 15.0 LPM (4 GPM) min. inlet
30.0 LPM (8 GPM) max. inlet
50% ‘4’ Port and 50% ‘2’ Port
A66 22.5 LPM ( 6 GPM) min. inlet
45.0 LPM (12 GPM) max. inlet
50% ‘4’ Port and 50% ‘2’ Port
B64 15.0 LPM ( 4 GPM) min. inlet
37.5 LPM (10 GPM) max. inlet
50% ‘4’ Port and 40% ‘2’ Port
D63 11.3 LPM (3 GPM) min. inlet
33.8 LPM (9 GPM) max. inlet
33% ‘4’ Port and 66% ‘2’ Port
**The FDC101 cartridge has three ports. Due to its size, it requires a B10-4
series body. As a result, all cartridges in a body will be supplied with a plug
located 180° from the cartridge cavity (port 1).
B10-4-6T body — 6HP*50-S
B10-4-8T body — 8HP*50-S
B10-4-4P body — 102 x 4
B10-4-6P body — 102 x 6
B10-4-8P body — 102 x 8
When machining a manifold using the FDC101, use C10-4 cavity. Do not
machine a port that directs flow to the nose of the cavity.
Plug
(1)
(2)
(3)
(4)
Out (Divider)
In (Combiner)
Out (Divider)
In (Combiner)
In (Divider)
Out (Combiner)
Ø 17.3 (.68)
Ø 15.8 (.62)
63.1
(2.48)
7.9
(.31)
1" Hex.
22 Nm
(16 lb. ft.)
Torque
7/8-14 UNF-2A
Thread
Ø 19.1 (.75)