Modular Valves
D
D-44
PRESSURE REDUCING MODULAR
VALVE FOR TWO PRESS SETTING
Two-Pressure Reducing
Modular Valve
40
rr
/min
0.2 to 14MPa
Features
qWhen the pressure in part of the
circuit is lower than the main circuit,
this modular valve controls pres-
sure by switching the low pressure
to secondary pressure (high pres-
sure, low pressure).
wEven when pressure changes in the
primary main circuit, the reduced
secondary pressure is maintained
at a constant level.
eMaximum Operating Pressure: 7,
25MPa {71.4, 255kgf/cm
2
}
Specifications
Model No.
Nominal
Diameter
(Size)
Maximum
Working Pressure
MPa{kgf/cm
2
}
Maximum
Flow Rate
r/min
Pressure Adjustment Range
MPa{kgf/cm
2
}
Weight
kg
Gasket Surface
Dimensions
Low pressure side
High pressure side
OGS-G01-PCC-K-**-22
P1C
1/8
7{71.4}
40
0.2 to 3.5
{2.0 to 35.7}
0.2 to 3.5{ 2.0 to 35.7}
4.8 ISO 4401-03-02-0-94
0.8 to 7{ 8.2 to 71.4}
P21
25{255}
0.8 to 7
{8.2 to 71.4}
3.5 to 14{35.7 to 143}
zSee the Pressure-Flow Rate
Characteristics for information about
how the flow rate is controlled at low
pressures.
xNote that a change in tank port back
pressure causes a change in setting
pressure.
cInstability occurs when there is a
small setting pressure differential
between the high pressure and low
pressure, so be sure to maintain at
least the minimum pressure differen-
tials described below.
C Type:
At least 0.3MPa {3.1 kgf/cm
2
}
1, 2 Type:
At least 0.5MPa {5.1 kgf/cm
2
}
vVent piping is not possible.
bNote that a sub plate and installation
bolts are not included. See pages D-
90 through D-95 if these items are
required.
nLow pressure is attained when the
solenoid is on.
mThe coil surface temperature
increases if this pump is kept contin-
uously energized. Install the valve so
there is no chance of it being
touched directly by hand.
Power supply
C1 : AC100V, C2 : AC200V
D1 : DC12V, D2 : DC24V
Auxiliary symbol K: With handle (standard)
R: With indicator light (optional)
Control port P: P port
Low pressure side pressure adjustment range C, 1
High pressure side pressure adjustment range C, 1, 2
Nominal diameter (size) 01
Mounting method G: Gasket type
Pressure reducing modular valve for two-press setting
Design number
There is no 11,
2C combination.
22–C1–K(R)–C1P–01G–OGS
Understanding Model Numbers
¡Handling
Solenoid Specifications
Model No. Rated Voltage
Starting
Current
Holding
Current
Holding
Power
OGS-G01-P**-K- C1-22
AC100V 50/60HZ 2.2/2.0A 0.52/0.38A 25/22W
C2
AC200V 50/60HZ 1.1/1.0A 0.26/0.19A 25/22W
D1
DC12V 2.2A 26W
D2
DC24V 1.1A 26W
D Modular Valves(P23-46)_E.q 03.11.25 3:07 PM Page 44