SF2 500-501
SF2 503
SF2 504
SF2 505
SF2 510
SF2 535
SF2 540
Flow rate up to 800 l/min
- Housing:
Anodized Aluminium
Steel (chemical heat treatment): only for SF2 535 - 540
- Cover:
Anodized Aluminium
Steel (chemical heat treatment): only for SF2 535 - 540
- Optional ange:
Anodized Aluminium
Filter housing materials
From -25 °C to +110 °C
Temperature
Fluid ow through the lter element from IN to OUT
Elements
- Standard NBR series A
- Optional FPM series V
Seals
GENERAL INFORMATIONSF2 500
Weights [kg]
Filter series
4.0
4.8
5.8
6.0
7.2
17
19
Note
SF2 500 lters mounting,
see the drawings on page
51 and following
Description Technical data
Suction lters
SF2 500 is a range of suction lters with integrated shut-off valve for
protection of the downstream pump against the coarse contamination.
They are placed below the minimum oil level, directly connected to the
suction line of the pump.
They can be tted on the side or below the tank, allowing a more exible
design of the tank.
The shut-off valve closes automatically when the cover is removed,
allowing the lter element replacement without the uid drop.
Available features:
- Flanged connections up to 4”, for a maximum ow rate of 800 l/min
- Optional hose fitting installed, to connect the suction line without
the use of anges
- Magnetic column, to hold the ferrous particles
- Plastic and metal handle, to close the shut-off valve before the cover
removal
- Electrical switch, to signal the closed shut-off valve
- Visual, electrical and electronic clogging indicators
Common application:
Industrial equipment
Suction lters
48