GENERAL INFORMATIONFHM
Weights [kg] and volumes [dm
3
]
2.17 - - - -
- 4.74 5.95 - -
- 4.74 5.95 - -
5.31 5.68 6.09 6.56 7.74
5.47 5.83 7.04 - -
8.78 10.38 11.43 - -
19.80 21.93 24.22 26.70 -
35.00 39.17 42.69 54.70 60.50
1 2 3 4 5
0.12 - - - -
- 0.30 0.50 - -
- 0.30 0.50 - -
0.29 0.38 0.48 0.60 0.89
0.27 0.34 0.56 - -
0.49 0.82 1.03 - -
1.04 1.76 2.53 3.36 -
1.63 2.35 2.96 5.11 6.44
1 2 3 4 5Length Length
Weights [kg]
FHM 006
FHM 007
FHM 010
FHM 050
FHM 065
FHM 135
FHM 320
FHM 500
Volumes [dm
3
]
Filter series
High Pressure lters
Manifold
Maximum working pressure up to 32 MPa (320 bar)
Flow rate up to 450 l/min
FHM is a range of high pressure lter for protection of sensitive components
in high pressure hydraulic systems in the mobile machines.
They are directly connected to the top of the manifold, through the proper
anged interface.
Available features:
Available features:
- Manifold connections up to Ø30 mm, for a maximum ow rate of 450 l/min
- ISO 4401 CETOP 3 and CETOP 5 interface, for direct mounting on the
CETOP valves
- Fine ltration rating, to get a good cleanliness level into the system
- Bypass valve, to relieve excessive pressure drop across the lter media
- Check valve, to protect the system against reverse ow
- Low collapse lter element “N”, for use with lters provided with bypass valve
- High collapse filter element “H”, for use with filters not provided with
bypass valve
- High collapse lter element with external support “S”, for lter element
protection against the back pressure caused by the check valve in lters
not provided with the bypass valve
- Visual, electrical and electronic differential clogging indicators
Common applications:
Delivery lines, in any high pressure industrial equipment
- Head
Phosphatized cast iron: FHM 006-007-010
Phosphatized steel: FHM 050-065-135-320-500
- Housing: Phosphatized steel
- Bypass valve: Steel
- Check valve: Steel
Filter housing materials
- Test pressure: 48 MPa (480 bar)
- Burst pressure: 96 MPa (960 bar)
- Pulse pressure fatigue test: 1 000 000 cycles with pressure
from 0 to 32 MPa (320 bar)
Pressure
From -25 °C to +110 °C
Temperature
- Opening pressure 600 kPa (6 bar) ±10%
- Other opening pressures on request.
Bypass valve
- Micro bre lter elements - series N: 20 bar
(not available for FHM 006, FHM 007 and FHM 010)
- Micro bre lter elements - series H: 210 bar
(not available for FHM 050 and FHM 500)
- Micro bre lter elements - series S: 210 bar
(only for FHM 050 and FHM 500)
- Wire mesh lter elements - series N: 20 bar
(not available for FHM 006)
- Wire mesh lter elements - series H: 210 bar
(not available for FHM 050 and FHM 500)
- Fluid ow through the lter element from OUT to IN
∆p element type
- Standard NBR series A
- Optional FPM series V
Seals
FHM lters are provided
for vertical mounting
Note
Manifold mounting
Connections
Description Technical data
High Pressure lters
512