WHAT MOVES YOUR WORLD

2-WAY SERVO

CARTRIDGE VALVE

ISO 7369 SIZES 40 TO 100

SIZES 125 AND 160

ReV. B, 03/ 2015

CONTENTS

DSHR

2 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

Description

General description

Symbols

Specifications

Block circuit diagram of the integrated electronics

Characteristic curves + Cone types

Models

Dimensions

Ordering information

Fail-safe functions

Spare parts

Specifications accumulator for sizes NB80.....NB160

This catalogue is for users with technical knowledge. To ensure that all necessary characteristics for

function and safety of the system are given, the user has to check the suitability of the products

described herein. In case of doubt please contact Moog Hydrolux.

Page

3

4

5

6

7

8

11

24

26

28

29

Configuration checklist

25

Servo valve for manifold mounting

Continuously adjustable from A to B or B to A.

Pilot valve (1) located directly on the cover.

Technical design

The valve comprises of 6 main groups.:

➢ Pilot valve (1)

➢ Main stage cone (2)

➢ Sleeve (3)

➢ Cover (4)

➢ Position transducer (5)

➢ Integrated control electronics (6)

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 3

GENERAL DESCRIPTION

DSHR

Function description

-

Main stage cone (2) with equal pilot-surfaces and metallic seat.

- Controlled by a high-dynamic servo-pilot valve (D661) or a high-dynamic proportional-pilot

valve (D633).

- Shut off of the connections A and B by cone-seat (8) of the main stage cone (2).

-

=> LEA

KAGE FREE

- Pressure balance through the drilling (7) in the main stage cone (2), resulting in a very low

displacement force.

- Control of the main stage cone by a position transducer (5).

- Closed loop by integrated electronics (6).

- Failsafe features : Main stage cone always closed, when pilot pressure available,

=> biased pilot valve and also with a fail-safe sandwich plate on request.

Recommendation: Valves with NB10 - pilot valve (High response-valve),

 Accu in the X - and Y - port of the cover (4), depending on the nominal size.

 At low presssure in the Y - port (< 2 bar), it’s recommended to use a check valve

in the Y- line to ensure a minimal backpressure to protect the diaphragm of the

accumulator !

For application where vibrations higher than 30g are expected (i.e Diecasting), the

electronics with additional dampening elements are required. (see “ ES ” in the

Ordering Information)

Attention: Wrong connecting leads to uncontrolled movements of the main stage cone and may

cause damage to person and machine !

▲

▼

▲

▼

➞

SYMBOLS

DSHR

4 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

NB40 + NB50 (D633)

NB40....NB63 (D661)

NB80 + NB100 (1xD661)

NB80...NB160 (2xD661)

D633-Pilot valve (NB06)

D661-Pilot valve (NB10)

2x D661-Pilot valve (NB10)

General data Value Unit Specifications

Mode of construction - -

2/2-way-cartridge valve, seat valve with positioning control.

Proportional-hydraulically operated with servo pilot valve

Mounting position - - any

Vibration - - 30 g, 3 axes

min. °C - 20

Ambient temperature range

max. °C + 60

Hydraulic

Operating pressure ports A, B

A-port max. bar dynamic 350 for all sizes

B-port max. bar dynamic 420 for all sizes

Pilot pressure for max. bar

280 => D661-Pilotvalve

350 => D633-Pilotvalve

Pressure fluid temperature range

min. °C -20

max. °C +80

Flow direction - -

A ➜ B

B ➜ A (recommended in case of pressure peaks > 350 bar)

Viscosity ➜ recommended mm

2

/S 15.....45

➜ max admissible mm

2

/S 5.....400

Filtration of the pressure fluid for the pilot circuit D661-Pilot D633-Pilot

Recommended cleanliness class for normal operation ISO 4406 < 19 / 16 / 13 ISO 4406 < 18 / 15 / 12

Recommended cleanliness class for longer life ISO 4406 < 17 / 14 / 11 ISO 4406 < 17 / 14 / 11

Filter rating recommended for normal operation β

15

≥75 (15 µm absolute) β

10

≥75 (10 µm absolute)

Filter rating recommended for longer life β

10

≥75 (10 µm absolute) β

6

≥75 (6 µm absolute)

Nominal size - - NB40 NB50 NB63 NB80 NB100 NB125 NB160

Nominal flow at ∆p = 5 bar

Q

N

L/min 1450 2700 3900 6100 9600 12550 20550

X-cone

Nominal flow at ∆p = 5 bar

Q

N

L/min 850 1100 2200 3000 4800 8450 13350

V-cone

max. permissible flow

3)

Qmax. L/min 2 x Q

N

(X-cone), 3 x Q

N

(V-cone)

Control stroke of mainstage - mm 14 14 24 24 30 40 50

Control oil volume Vst. cm

3

8,1 13,2 33,5 52,3 108,4 231,7 515,4

Pilot valve: (NB40-NB160) (High Response valve) Series D661 => NB40 to NB160 (NB80 to NB160 => 2 x D661)

Pilot valve: (only NB40 + NB50) Series D633 => NB40 + NB50

10 / 20 (NB40 / NB50) => D633-Pilotvalve at ∆p = 35 bar

1)

Nominal flow of the pilot valve Q

N

L/min

35 => 1x D661-Pilotvalve at ∆p = 5 bar

1)

65 => 2x D661-Pilotvalve at ∆p = 5 bar

1)

max. null leakage flow at

Q

L

L/min

0,4 => D633-Pilotvalve

p

x

= 210 bar of the pilot valve

4,5 => D661-Pilotvalve

2)

Static / dynamic

Hysteresis - % < 0,3

Response time for signal change

0...100% at p

x

= 160 bar with accu

- ms 12 15 25

32 (1xD661) 55 (1xD661)

55 140

and D661-pilotvalve

18 (2xD661) 32 (2xD661)

To achieve this response times, membrane accumulators in the P port of the covers are recommended. See on pages 12 until 15 the size of the

accumulators. To avoid pressure peaks, for sizes NB63, NB80, NB100, NB125 and NB160 an additional accumulator in the T port is also recommended.

Response time for signal change

0...100% at p

x

= 160 bar without

- ms 22 25 - - - - -

accu and D633-pilotvalve

Weight - kg

23 (D633) 36 (D633)

58

125 (1x D661) 210 (1x D661)

360 733

26 (D661) 39 (D661) 135 (2x D661) 220 (2x D661)

SPECIFICATIONS

DSHR

1)

Nominal flow per land / Flow rate at a different ∆p : Q

x

= Q

nom.

•



∆px

5

2)

Leakage for one pilot valve - for two pilot valves the leakage is approximately twice as high.

3)

For higher flow rates, please contact Moog.

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 5

BLOCK CIRCUIT OF THE INTEGRATED

ELECTRONICS

DSHR

Pole connector to EN 175201 Part 804 (DIN 43 651), and mating connector (type E, metal shell) with

leading protective earth connection ( )

6 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

CHARACTERISTIC CURVES + CONE TYPES

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 7

Cone “ X ”

Cone “ V ”

Flow characteristics (measured at  = 32 mm

2

/s and t = 40°)

Nominal flow at ∆p = 5 bar

MODELS WITH 1

x

D661-PILOT

DSHR

Symbol

Cone

NB

Q

N

(I/min) at

∆

p= 5 bar

Description

Weight

(kg)

X

1450

N-DSHRE40_6XB__1AA_X

V

X

V

X

V

X

V

850

2700

1100

3900

2200

40

50

63

80

100

80

100

6100

9600

3000

4800

N-DSHRE40_6VB__1AA_X

N-DSHRE50_6XB__1AB_X

N-DSHRE50_6VB__1AB_X

N-DSHRE63_6XB__1AC_X

N-DSHRE63_6VB__1AC_X

N-DSHRE80_6XB__1AD_X/AP05

N-DSHRE100_6XB__1AE_X/AP01

N-DSHRE80_6VB__1AD_X/AP05

N-DSHRE100_6VB__1AE_X/AP01

26

39

58

125

210

125

210

8 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

MODELS WITH 2

x

D661-PILOT

DSHR

Symbol

Cone

NB

Q

N

(I/min) at

∆

p= 5 bar

Description

Weight (kg)

X

6100

N-DSHRE80_6XB__1AD_X/AP05

V

X

V

X

V

X

V

3000

9600

4800

12550

8450

80

100

125

N-DSHRE80_6VB__1AD_X/AP05

N-DSHRE100_6XB__1AE_X/AP01

N-DSHRE100_6VB__1AE_X/AP01

N-DSHRE125_6XB__1AF_X/AP02

N-DSHRE125_6VB__1AF_X/AP02

N-DSHRE160_6XB__1AG_X/AP01

N-DSHRE160_6VB__1AG_X/AP01

160

20550

13350

135

220

360

733

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 9

MODELS WITH D633-PILOT VALVE

DSHR

Symbol

Cone

NB

Q

N

(I/min) at

∆

p= 5 bar

Description

Weight (kg)

X

1450

N-DSHRE40_6XA__1AA_X

V

X

V

850

2700

1100

40

50

N-DSHRE40_6VA__1AA_X

N-DSHRE50_6XA__1AB_X

N-DSHRE50_6VA__1AB_X

23

36

10 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

INSTALLATION DIMENSIONS NB40-NB100

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 11

INSTALLATION DIMENSIONS NB125 AND NB160

DSHR

12 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

15

DIMENSIONS NB40 WITH D661-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 13

DIMENSIONS NB50 WITH D661-PILOT VALVE

DSHR

14 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

DIMENSIONS NB63 WITH D661-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 15

SBO 330-0,6 E1/112U-330LC 100

DIMENSIONS NB80 WITH 1 D661-PILOT VALVE

DSHR

16 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

DIMENSIONS NB100 WITH 1 D661-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 17

DIMENSIONS NB80 WITH 2 D661-PILOT VALVE

DSHR

18 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

DIMENSIONS NB100 WITH 2 D661-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 19

DIMENSIONS NB125 WITH 2 D661-PILOT VALVE

DSHR

20 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

DIMENSIONS NB160 WITH 2 D661-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 21

DIMENSIONS NB40 WITH D633-PILOT VALVE

DSHR

22 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

DIMENSIONS NB50 WITH D633-PILOT VALVE

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 23

ORDERING INFORMATION

DSHR

24 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

Subject to technical changes

2 = 350 bar

CONFIGURATION CHECKLIST

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 25

Customer

Fill out date (Customer) Prepared by

Application

Nominal valve size

Cone type (X, V)

1)

Fluid

Seal material

(Standard = NBR)

Fluid temperature Ambient temperature

Pilot pressure [bar] Main stage pressure [bar]

Filtersubplate for

pilot valve DDV [Y/N]

Other pilotvalve Flow direction

A



B B



A

Qmax [L/min] ∆p [bar]

Qmin [L/min] ∆p [bar]

Max. response time [ms] Response time FS [ms]

Failsafe cone position

(Main stage)

Command signal

(Standard = 0...10 Volt)

Electrical connector

(Standard = 11 + Pe)

Fastening screws Electrical connector

included in delivery [Y/N] included in delivery [Y/N]

Electronic with rubber LVDT pressure peak

dampening element [Y/N] protection (size 100 - 160)

Accumulator in X-port of

cover [Y/N]

Y

N

Accumulator in Y-port of

cover [Y/N]

Y

N

Remarks

Allocated

part number

Closing date (Moog)

6100 ─ 002e ─ 017 (old: 7-3-FE03)

11 + Pe

Hydraulic Data

!! Please fill out the form as accurately as possible !!

Mark selection fields with "



"

O

C

Basic data

N

2)

FS-Function: Check FS-time for biased DDV, For FS-valve and flow B to A pilotpressure must be > than 0,5 x system pressure

N

X

1)

Please specify non-standard cones !!

Accumulators only available with certificate according 97/23/EG - No country specific certificates available !

Issue: 1.0

Y

external

Control failsafe valve

N

Biased

Pilot

FS-

Valve



 

 Feedback 12.... 20 mA (Type D)



 

 Feedback 0.... 10 Volt (Type B)

closed

open

Failsafe function

2)

(Biased pilot, FS-valve..)

DDV D661

Electrical Data

Miscellaneous

Pilot valve

(DDV only for size 40 and 50)

12.. 20 mA

XLB

O

C

0.....10 Volt

Remark: High flows and fast valve response times could cause high pressure peaks (water hammer) in the hydraulic system.

This effect has to be avoided by suitable precautions.

X

N

FAIL-SAFE FUNCTIONS

DSHR

26 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

Main stage actively closes :

“ E “

Main stage actively opens :

“ G ”

ABOUT MOOG

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 27

Hydraulic solutions

Since Bill Moog invented the ﬁrst commercially viable

servo valve in 1951, Moog has set the standard for world-

class hydraulic technology. Today, Moog products are

used in a variety of applications - pro

viding high power,

enhanced productivity and ever better performance for

some of the worlds most demanding applications.

Electric solutions

Clean operation, low noise generation, less maintenance

and reduced power consumption make Moog electric

solutions ideal for applications worldwide. Moog is

the ideal partner for applications where tr

ansitioning

technologies requires special expertise.

Hybrid solutions

By incorporating the advantages of existing hydraulic

and electric technologies - including modular ﬂexibility,

increased efﬁciency and cleanliness - into innovative

hybrid solutions,

Moog offers ne

w performance potential

in specialized applications.

Solutions

Moog Global Support

Moog Global Support is our promise to offer world-class

Repair

and

Maintenance Services

delivered expertly by our

trained technicians. With the reliability only available from

a leading manufacturer with facilities around the world,

Moog offers you service and expertise you can count on to

keep your equipment operating as it should.

This promise offers many beneﬁts to our customers

including:

• Reduce y

our downtime by keeping critical machines

running in peak performance

• Protect your investment by ensuring reliability,

versatility and long-life of products

•

Better plan y

our maintenance activities and make

systematic upgrades

•

Le

verage our ﬂexible programs to meet the unique

service requirements of your facility

Look to Moog for global support including:

• Repair services using OEM parts are performed b

y

trained technicians to the latest speciﬁcations

•

Stock management of spare parts and products to

pre

vent unplanned downtime

Press

Injection Molding Machine

• Flexible programs, tailored to your needs such as

upgrades, preventative maintenance and annual/multi-

year contracts

• On-site services bring the expertise to you, providing

quicker commissioning, set-up and diagnostics

•

Access to reliable services that are guar

anteed to

offer consistent quality anywhere in the world

For more information on

Moog Global Support visit

www

.moog.com/industrial/service.

SPARE PARTS

DSHR

Seal-Kits & Accessories for Pilot valves

Pos. Description Ordering number

NBR HNBR FPM (Viton)

85 Shore 85 Shore 85 Shore

7 Seal - Kit D663 XEB- 17866 17867 17868

7 Seal - Kit D661 XEB- 17869 17870 17871

Seal - Kits only available completely

Description Accessories

D633 D661 -

Socket screws

DIN EN ISO X784- 10522 (4x) 10631 (4x) -

4762-12.9

Torques (Nm) 8 13 -

Plug

11 + PE

*This part number have a unit of measure (length), for example : 1 x X789-00117 => 1 metre / 10 x X798-00117 => 10 metre

Order example : O-Ring NBR Pos.4 NB50 => Part number : X783-00268

28 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

Seal-Kits & Accessories for Sleeve and Cover

Pos. Description Ordering number

NB40 NB50 NB63 NB80 NB100 NB125 NB160

Seal - Kit XEB 17680-000N00 17681-000N00 17682-000N00 17683-000N00 17924-000N00 18045-000N00 18147-000N00

1 O-Ring X783- 00207 00207 00293 00281 01296 01304 -

2 O-Ring X783- 00204 00270 00297 00283 01298 01301 01303

3 Backup-Ring X780- 18231 18338 08348 08431 18439 18445 18452

4 O-Ring X783- 00205 00268 00270 00282 01297 01300 01302

5 Backup-Ring X780- 18225 18229 18338 18344 18427 18442 18450

6

Locking Screws, not

C97 247-001 247-001 122-001 122-001 005-001 005-001 151-001

for X-cone

Description Accessories (not in valve delivery included !)

Socket screws

DIN EN ISO X784- 12008 (4x) 12010 (4x) 13004 (4x) 12409 (8x) 13014 (8x) 13602 (8x) 14202 (12x)

4762-12.9

Torques (Nm) 550 550 1800 900 1800 3700 5900

Plug

XEB 17725

11+PE-pole (Metal)

* Cable 12 x 1 mm

2

for plug 11+PE-pole

X798- 00117

Accumulator SBO 300-1,4E1/112A-330AB (HYDAC) for NB80,NB100,NB125,not included in delivery

Nominal volume (I)

Permissible pressure Perm. working

Q

max

.(I/min) Weight (kg)

ratio (p

2

: p

0

) pressure (bar)

1,4 8 : 1 330 95 7,6

Accumulator SBO 300-3,5E1/112A-330AB (HYDAC) for NB160, not included in delivery

Nominal volume (I)

Permissible pressure Perm. working

ratio (p

2

: p

0

) pressure (bar)

Q

max.

(/min) Weight (kg)

3,5 4 : 1 330 150 13,8

SPECIFICATIONS ACCUMULATOR FOR

SIZES NB80....NB160

DSHR

NB160

NB80, NB100, NB125

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 29

NOTES

DSHR

30 DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160

NOTES

DSHR

DSHR Servo cartridge valve NB40, 50, 63, 80, 100, 125, 160 31

WHAT MOVES YOUR WORLDWHAT MOVES YOUR WORLD

Argentina

+54 11 4326 5916

info.argentina@moog.com

Australia

+61 3 9561 6044

info.australia@moog.com

Br

azil

+55 11 3572 0400

info.brazil@moog.com

Canada

+1 716 652 2000

info.canada@moog.com

China

+86 21 2893 1600

info.china@moog.com

Finland

+358 10 422 1840

info.ﬁnland@moog.com

France

+33 1 4560 7000

info.france@moog.com

Germany

+49 7031 622 0

info.germany@moog.com

Hong Kong

+852 2 635 3200

info.hongkong@moog.com

India

+91 80 4057 6666

info.india@moog.com

Ireland

+353 21 451 9000

info.ireland@moog.com

Italy

+39 0332 421 111

info.italy@moog.com

Japan

+81 46 355 3767

info.japan@moog.com

K

orea

+82 31 764 6711

info.korea@moog.com

Lux

embourg

+352 40 46 401

info.luxembourg@moog.com

The Netherlands

+31 252 462 000

info.thenetherlands@moog.com

Norway

+47 6494 1948

info.norway@moog.com

Russia

+7 8 31 713 1811

info.russia@moog.com

Singapore

+65 677 36238

info.singapore@moog.com

South Africa

+27 12 653 6768

info.southafrica@moog.com

Spain

+34 902 133 240

info.spain@moog.com

Sweden

+46 31 680 060

info.sweden@moog.com

Switzerland

+41 71 394 5010

info.switzerland@moog.com

Turke

y

+90 216 663 6020

info.turkey@moog.com

United Kingdom

+44 168 429 6600

info.uk@moog.com

USA

+1 716 652 2000

info.usa@moog.com

TAKE A CLOSER LOOK.

Moog designs a range of motion control products that complement the performance of those featured in this catalog.

Visit our website for more information and contact the Moog facility nearest you.

www.moog.com/industrial

Moog is a registered trademark of Moog Inc. and its subsidiaries. All trademarks as indicated herein are the

property of Moog Inc. and its subsidiaries.

ed.

All changes are reserv

ed.

2-way Cartridge Valves -

02/2015,

Servo

DSHR-1-EN-Servo cartridge