CLOGGING
INDICATORS
CATALOGUE
PASSION PERFORM
T
CLOGGING INDICATORS CATALOGUE
Clogging indicators are devices that check the life time of the lter
elements. They measure the pressure drop through the lter element
directly connected to the lter housing.
These devices trip when the clogging of the lter element causes a pressure
drop increasing across the lter element.
Filter elements are efcient only if their Dirt Holding Capacity is fully
exploited. This is achieved by using lter housings equipped with
clogging indicators.
The indicator is set to alarm before the element becomes fully clogged.
MP Filtri can supply indicators of the following designs:
- Vacuum switches and gauges
- Pressure switches and gauges
- Differential pressure indicators
These type of devices can be provided with a visual, electrical or both
signals. The electronic differential pressure clogging indicator is also
available. It provides both analogical 4-20 mA output and digital warning
(75% of clogging) and alarm (clogging) outputs.
In the following pages you can find a reference guide about the types
of clogging indicators available in the different families of MP Filtri’s
Hydraulic Filtration range of products.
Clogging Indicators
706
Clogging Indicators
Clogging Indicators
707
Clogging Indicators
708
DESIGNATION, ORDERING CODES
& TECHNICAL DATA
QUICK REFERENCE GUIDE
SUCTION FILTERS INDICATORS
RETURN FILTERS INDICATORS
RETURN / SUCTION FILTERS INDICATORS
SPIN-ON FILTERS INDICATORS
LOW & MEDIUM PRESSURE FILTERS INDICATORS
HIGH PRESSURE FILTERS INDICATORS
STAINLESS STEEL HIGH PRESSURE FILTERS INDICATORS
FILTERS FOR POTENTIALLY EXPLOSIVE ATMOSPHERE INDICATORS
VACUUM INDICATORS
BAROMETRIC (PRESSURE) INDICATORS
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
CLOGGING INDICATORS ORDERING CODES
TECHNICAL DATA
710
715
716
718
720
722
723
724
725
726
728
732
743
Page
INDEX
Clogging Indicators
Clogging Indicators
709
RETURN
FILTERS
BLA15HA51P01
BLA15HA52P01
BLA15HA53P01
BLA15HA71P01
BVA14P01
BVR14P01
BVP15HP01
BVQ15HP01
BEA15HA50P01
BEA15HA50P01UL
BEM15HA41P01
MPFX
MPTX
MPF
MPT
MPH
With bypass
1.75 bar
BLA20HA51P01
BLA20HA52P01
BLA20HA53P01
BLA20HA71P01
BVA25P01
BVR25P01
BVP20HP01
BVQ20HP01
BEA20HA50P01
BEA20HA50P01UL
BEM20HA41P01
MPFX
MPTX
MPF
MPT
MPH
With bypass
3 bar
With bypass
2.5 bar
FRI
DLA20xA51P01
DLA20xA52P01
DLA20xA71P01
DLE20xA50P01
DLE20xF50P01
DTA20xF70P01
DEU20VA50P01UL
DVA20xP01
DVM20xP01
DEA20xA50P01
DEA20xA50P01UL
DEM20xx10P01
DEM20xx20P01
DEM20xx30P01
DEM20xx35P01
MPLX
With bypass
4.5 bar
With bypass
2.4 bar
BLA15HA51P01
BLA15HA52P01
BLA15HA53P01
BLA15HA71P01
BEA15HA50P01
BEA15HA50P01UL
BEM15HA41P01
BVA14P01
BVR14P01
BVP15HP01
BVQ15HP01
BLA20HA51P01
BLA20HA52P01
BLA20HA53P01
BLA20HA71P01
BEA20HA50P01
BEA20HA50P01UL
BEM20HA41P01
BVA25P01
BVR25P01
BVP20HP01
BVQ20HP01
RFEX060-080-110-160
With bypass
1.75 bar
RFEX060-080-110-160
Without bypass
MDH 250
BLA15HA51P01
BLA15HA52P01
BLA15HA53P01
BLA15HA71P01
BVA14P01
BVR14P01
BVP15HP01
BVQ15HP01
With bypass
1.75 bar
DVS12HP01
DES12HA10P01
DES12HA30P01
DES12HA80P01
BEA15HA50P01
BEA15HA50P01UL
BEM15HA41P01
MDH 250
BLA20HA51P01
BLA20HA52P01
BLA20HA53P01
BLA20HA71P01
BVA25P01
BVR25P01
BVP20HP01
BVQ20HP01
With bypass
3 bar
DVS25HP01
DES25HA10P01
DES25HA30P01
DES25HA80P01
BEA20HA50P01
BEA20HA50P01UL
BEM20HA41P01
SUCTION
FILTERS
SFSC 500 - 503 - 504 - 505
SFSC 510 - 535 - 540
VLA21xA51P01
VLA21xA52P01
VLA21xA53P01
VLA21xA71P01
SFEX060-110
VLB21AA51P01
VLB21AA52P01
VLB21AA53P01
VLB21AA71P01
VEB21AA50P01
VVB20P01
VVS20P01
VVA20P01
VVR20P01
VEA21xA50P01
VEA21xA50P01UL
SFMC250
VLA21xA51P01
VLA21xA52P01
VLA21xA53P01
VLA21xA71P01
VVA20P01
VVR20P01
VEA21xA50P01
VEA21xA50P01UL
QUICK REFERENCE GUIDE
Ordering codes
Filter
series
Filter
family
Filter series
Electronic / Electrical-Visual
indicators
Visual
indicators
Electrical
indicators
Filter series
Without bypass
Suction
Line
Clogging Indicators
710
SPIN-ON
FILTERS
MPS 050 - 070 - 100 - 150
MPS 200 - 250 - 300 - 350
Suction line
MPS 050 - 070 - 100 - 150
MPS 200 - 250 - 300 - 350
MST 050 - 070 - 100 - 150
Return line
MPS 051 - 071 - 101 - 151
MPS 301 - 351
MSH 050 - 070 - 100 - 150
In-line
VLB21AA51P01
VLB21AA52P01
VLB21AA53P01
VLB21AA71P01
BLA15HA51P01
BLA15HA52P01
BLA15HA53P01
BLA15HA71P01
DTA12xF70P01
DTA20xF70P01
DLE12xA50P01
DLE12xF50P01
DLE20xF50P01
DLE20xF50P01
DLA12xA51P01
DLA12xA52P01
DLA12xA71P01
DLA20xA51P01
DLA20xA52P01
DLA20xA71P01
VEB21AA50P01
BEA15HA50P01
BEA15HA50P01UL
BEM15HA41P01
VVB20P01
VVS20P01
BVA14P01
BVR14P01
BVP15HP01
BVQ15HP01
DVA12xP01
DVM12xP01
DVA20xP01
DVM20xP01
With bypass valve
2.5 bar
With bypass valve
2.5 bar
RETURN / SUCTION
FILTERS
MRSX 116 - 165 - 166
Suction line
LMP 124 MULTIPORT
MRSX 116 - 165 - 166
Return line
VLB21AA51P01
VLB21AA52P01
VLB21AA53P01
VLB21AA71P01
BLA20HA51P01
BLA20HA52P01
BLA20HA53P01
BLA20HA71P01
VVB20P01
VVS20P01
BVA25P01
BVR25P01
BVP20HP01
BVQ20HP01
DVA20xP01
DVM20xP01
BVA25P01
BVR25P01
BVP20HP01
BVQ20HP01
VEB21AA50P01
DLA20xA51P01
DLA20xA52P01
DLA20xA71P01
DLE20xA50P01
DLE20xF50P01
BLA20HA51P01
BLA20HA52P01
BLA20HA53P01
BLA20HA71P01
DTA20xF70P01
DEA20xA50P01
DEM20xx10P01
DEM20xx20P01
DEM20xx30P01
DEM20xx35P01
BEA20HA50P01
BEA20HA50P01UL
BEM20HA41P01
BET25HF10P01
BET25HF30P01
BET25HF50P01
BEA20HA50P01
BEA20HA50P01UL
BEM20HA41P01
BET25HF10P01
BET25HF30P01
BET25HF50P01
QUICK REFERENCE GUIDE
Ordering codes
Filter
series
Filter series
Electronic / Electrical-Visual
indicators
Visual
indicators
Electrical
indicators
Filter series
Filter
family
DEU20VA50P01UL
DEA12xA50P01
DEM12xAxxP01
DEA20xA50P01
DEM20xAxxP01
DEU20VA50P01UL
Clogging Indicators
711
Filter
series
Filter
family
Filter series
Electronic / Electrical-Visual
indicators
Visual
indicators
Electrical
indicators
Filter series
QUICK REFERENCE GUIDE
Ordering codes
LOW & MEDIUM
PRESSURE FILTERS
HIGH PRESSURE
FILTERS
FMP 039 - 065 - 135 - 320
FHP 010 - 011 - 065 - 135 - 350 - 351 - 500
FMMX 050
FMM 050 - 150
FHA 051
FHM 006 - 007 - 010 - 050 - 065 - 135 - 320 - 500
FHB 050 - 135 - 320
FHF 325
FHD 021 - 051 - 326 - 333
With bypass valve
6 bar
DLA50xA51P01
DLA50xA52P01
DLA50xA71P01
DLE50xA50P01
DLE50xF50P01
DVA50xP01
DVM50xP01
DEA50xA50P01
DEM50xx10P01
DEM50xx20P01
DEM50xx30P01
DEM50xx35P01
FMP 039 - 065 - 135 - 320
FHP 010 - 011 - 065 - 135 - 350 - 351 - 500
FMMX 050
FMM 050 - 150
FHA 051
FHM 006 - 007 - 010 - 050 - 065 - 135 - 320 - 500
FHB 050 - 135 - 320
FHF 325
FHD 021 - 051 - 326 - 333
Without bypass
valve
DTA70xF70P01
DTA95xF70P01
DLA70xA51P01
DLA70xA52P01
DLA70xA71P01
DLA95xA51P01
DLA95xA52P01
DLA95xA71P01
DLE70xA50P01
DLE70xF50P01
DLE95xA50P01
DLE95xF50P01
DVA70xP01
DVA95xP01
DVM70xP01
DVM95xP01
With bypass valve
3.5 bar
DLA20xA51P01
DLA20xA52P01
DLA20xA71P01
DLE20xA50P01
DLE20xF50P01
DTA20xF70P01
DVA20xP01
DVM20xP01
DEA20xA50P01
DEM20xx10P01
DEM20xx20P01
DEM20xx30P01
DEM20xx35P01
LMP 110
LMP 112 - 116 - 118 - 119 MULTIPORT
LMP 120 - 122 - 123 MULTIPORT
LMP 210 - 211 - LDP
LMP 400 - 401 & 430 - 431
LMP 900 - 901
LMP 902 - 903
LMP 950 - 951
LMP 952 - 953 - 954
LMD 211 - 400 - 401 - 431 - 951 - LDD
With bypass valve
1.75 bar
DLA12xA51P01
DLA12xA52P01
DLA12xA71P01
DLE12xA50P01
DLE12xF50P01
DTA12xF70P01
DVA12xP01
DVM12xP01
DVS12HP01
DEA12xA50P01
DEM12xx10P01
DEM12xx20P01
DEM12xx30P01
DEM12xx35P01
LPH 630
With bypass valve
2.5 bar
DLA20xA51P01
DLA20xA52P01
DLA20xA71P01
DLE20xA50P01
DLE20xF50P01
DTA20xF70P01
DVA20xP01
DVM20xP01
DEA20xA50P01
DEM20xx10P01
DEM20xx20P01
DEM20xx30P01
DEM20xx35P01
LPH 630
DVS25HP01
DES25HA10P01
DES25HA30P01
DES25HA80P01
LFEX060-080-110-160
Without bypass
valve
DLA50xA51P01
DLA50xA52P01
DLA50xA71P01
DLE50xA50P01
DLE50xF50P01
DTA50xF70P01
DVA50xP01
DVM50xP01
DEA50xA50P01
DEM50xx10P01
DEM50xx20P01
DEM50xx30P01
DEM50xx35P01
LPH 630
LMP 110
LMP 112 - 116 - 118 - 119 MULTIPORT
LMP 120 - 122 - 123 MULTIPORT
LMP 210 - 211 - LDP
LMP 400 - 401 & 430 - 431
LMP 900 - 901
LMP 902 - 903
LMP 950 - 951
LMP 952 - 953 - 954
LMD 211 - 400 - 401 - 431 - 951 - LDD
DVS40HP01
DES40HA10P01
DES40HA30P01
DES40HA80P01
LFEX060-080-110-160
DEU20VA50P01UL
DEU20VA50P01UL
DEU50VA50P01UL
DEU50VA50P01UL
DEM70xx10P01
DEM70xx20P01
DEM70xx30P01
DEM70xx35P01
DEM95xx10P01
DEM95xx20P01
DEM95xx30P01
DEM95xx35P01
DEA70xA50P01
DEA95xA50P01
DEU70VA50P01UL
Clogging Indicators
712
Filter
series
Filter series
Electronic / Electrical-Visual
indicators
Visual
indicators
Electrical
indicators
Filter series
FILTERS FOR POTENTIALLY
EXPLOSIVE ATMOSPHERE
FZP 039 - 136
FZH 012 - 040
FMMX 050
FZP 039 - 136
FZH 012 - 040
FMMX 050
With bypass valve
6 bar
With bypass valve
6 bar
With bypass valve
6 bar
Without bypass valve
Without bypass valve
Without bypass valve
DVX50xP01
DVY50xP01
DVX70xP01
DVX95xP01
DVY70xP01
DVY95xP01
DEH50xA48P01
DEH50xA49P01
DEH50xA70P01
DEH50xA48P01
DEH50xA49P01
DEH50xA70P01
DEH70xA48P01
DEH70xA49P01
DEH70xA70P01
DEH70xA48P01
DEH70xA49P01
DEH70xA70P01
DVZ50xP01
DVZ70xP01
DVZ95xP01
DVA50xP01
DVM50xP01
DVA70xP01
DVA95xP01
DVM70xP01
DVM95xP01
Filter
family
STAINLESS STEEL
HIGH PRESSURE FILTERS
FZP 039 - 136
FZB 039
FZM 039
FZD 051
FZH 012 - 040
FZH 012 - 040
FZP 039 - 136
FZB 039
FZM 039
FZD 010 - 021 - 051
With bypass valve
6 bar
With bypass valve
6 bar
Without bypass
valve
Without bypass
valve
DLX50xA51P01
DLX50xA52P01
DLX70xA51P01
DLX70xA52P01
DLX95xA51P01
DLX95xA52P01
DVX50xP01
DVY50xP01
DVX70xP01
DVX95xP01
DVY70xP01
DVY95xP01
DEX50xA50P01
DEX70xA50P01
DEX95xA50P01
DVZ70xP01
DVZ95xP01
DVZ50xP01 DEZ50xA50P01
DEZ70xA50P01
DEZ95xA50P01
DLZ50xA51P01
DLZ50xA52P01
DLZ70xA51P01
DLZ70xA52P01
DLZ95xA51P01
DLZ95xA52P01
QUICK REFERENCE GUIDE
Ordering codes
Clogging Indicators
713
Clogging Indicators
Suitable indicator types
AROMETRIC (PRESSURE) INDICATORS
Pressure indicators are used on the Return line
to check the efciency of the lter element.
They measure the pressure upstream of the
lter element.
Standard items are produced with R 1/8” EN
10226 connection.
Barometric (pressure) indicators are identied
in the Hydraulic Filtration catalogue and in the
Quick Reference Guide table by the letter "B"
2
3
1
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
IFFERENTIAL PRESSURE INDICATORS
Differential pressure indicators are used on
the Pressure line to check the efciency of the
lter element.
They measure the pressure upstream and
downstream of the lter element (differential
pressure).
Standard items are produced with special
connection G 1/2” size.
Also available in Stainless Steel models.
Differential pressure indicators are identied
in the Hydraulic Filtration catalogue and in the
Quick Reference Guide table by the letter "D"
2
3
1
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
ACUUM INDICATORS
Vacuum indicators are used on the Suction
line to check the efciency of the lter
element.
They measure the pressure downstream of
the lter element.
Standard items are produced with R 1/4” EN
10226 connection.
Available products with R 1/8” EN 10226 to
be tted on MPS series.
Vacuum indicators are identied in the
Hydraulic Filtration catalogue and in the Quick
Reference Guide table by the letter "V".
2
3
1
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
Example:
DVA20xP01D
Example:
BVA14P01B
Example:
VVB20P01V
V
B
D
Clogging Indicators
714
SUCTION FILTERSCLOGGING INDICATORS
Designation & Ordering code
Series
VE
VL
VV
Option
Certications
P01
Pxx
EX
UL
MP Filtri standard
Without
Customized
ATEX certication
UL certication
Conguration example 1:
VE VA 50A21 P01 EX
Conguration example 2:
VL AB 71A21 P01
Conguration example 3:
VV R 20 P01
Electrical connections
50
52
51
53
71
Vacuum setting
21
20
VL
VL
VEB - VLB
VL
VLVEB
SFEX
VV
VV
VE
VE
VEA - VLA
VE
VEA21A VEA21V
SF2
-0.21 bar
Electrical vacuum indicator
Connection EN 175301-803
Vacuum gauge
Electrical/Visual vacuum indicator
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
-0.16 bar
VACUUM INDICATORS
Seals
Thermostat
A
V
A
NBR
FPM
Without
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Type VE - VL Type VV
A
B
A
R
B
S
Connection EN 10226 - R1/4”
Connection EN 10226 - R1/8”
Axial connection EN 10226 - R1/4”
Radial connection EN 10226 - R1/4”
Axial connection EN 10226 - R1/8”
Radial connection EN 10226 - R1/8”
Clogging Indicators
715
RETURN FILTERSCLOGGING INDICATORS
Designation & Ordering code
Series
BE
BL
BV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
BE H 41A15 P01 EX
Conguration example 2:
BL HA
A
71A20 P01
Conguration example 3:
BV R 14 P01
Conguration example 4:
BV H P 20 P01
Type
A A
R
M
T
P
Q
Standard type Axial connection pressure gauge
Electrical pressure indicator
Radial connection pressure gauge
Visual pressure indicator
With wired electrical connection
With thermal switch
Electrical/Visual pressure indicator
Visual indicator with automatic reset
Visual indicator with manual reset
BAROMETRIC
(
PRESSURE
)
INDICATORS
-
-
Electrical connections BEA BEM BLBET
BE BL BV
50
30
41
10
51
53
52
71
Connection via four-core cable
Connection AMP Superseal series 1,5
---
-
-
-
-
-
-
-
-
-
- - -
- - -
---
---
Connection EN 175301-803
Connection Deutsch DT-04-2-P
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Pressure setting
14
20
15
25
1.4 bar
2.0 bar
1.5 bar
2.5 bar
Seals
Thermostat
H
A
F
HNBR
Without thermostat
With thermostat
-
-
-
-
-
-
--
-
-
-
BEA-BEM BET
BE
BLA
BLA
BVA-BVR
BVA-BVR
BVP-BVQ
BVP-BVQ
BEA-BEM BLABET
- -
-
Certications
EX
UL
Without
ATEX certication
UL certication
BEM-BET BL BVBEA
-
-
-
-
-
-
Clogging Indicators
716
Series
Series
DE
T2
T4
DL
DV
DT
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
DE HM 50F20 P01
Conguration example
T2 H
Conguration example 3:
Conguration example 2:
DL
DE
V
V
E
U
71
50
A
A
20
50
P01
P01 UL
Conguration example 4:
DT HA 70F20 P01
Conguration example 5:
DV VM 20 P01
Type
A A
U
M M
Pressure setting
12
20
25
1.2 bar
2.0 bar
2.5 bar
Standard type With automatic reset
Electrical differential pressure indicator
Plug
Plug
Standard type 210 bar, UL certied
Electrical differential pressure indicator
With wired electrical connection With manual reset
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
Seals
Seals
H
H
A
V
V
HNBR
HNBR
NBR
FPM
FPM
- - - - - --
- - - - - --
-
-
-
-
-
Electrical connections
20
10
30
50
52
35
51
70
71
80
DL
DEA
DEA
DEA
T2
DE DT
DEM
DEM
DEM
T4
DV
-
-
-
DVADT DVMDESDEU DVSDL
DEA DVADTDEM DVMDESDEU DVSDL
-
-
-
-
-
-
-
-
--
--
-
-
-
-
-
- -
DLE DTDESDEU DLA
- -- -
- - -- -
- -- -
- -
--
-
-
-
-- -
-
--
--
-
- -
-
-
-
-
--
--
--
DTDESDEU DLA DLE
-
--
-
Thermostat
A
F
Without thermostat
With thermostat
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Connection Stud #10-32 UNF
E
S
For high power supply
Compact version
-
-
-
-
S
With automatic reset
RETURN FILTERS CLOGGING INDICATORS
Designation & Ordering code
Certications
UL
Without
UL certication
OTHERSDEU
-
-
Clogging Indicators
717
Designation & Ordering code
Series
VE
VL
VV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
VE VA 50A21 P01 EX
Conguration example 2:
VL AB 71A21 P01
Conguration example 3:
VV R 20 P01
Type VE - VL Type VV
Electrical connections
50
52
A
B
A
R
51
B
S
53
71
Vacuum setting
21
20
VL
VL
VL VV
VE
VE
VE
-0.21 bar
Electrical vacuum indicator
Connection EN 175301-803
Vacuum gauge
Electrical/Visual vacuum indicator
Connection EN 10226 - R1/4”
Connection EN 10226 - R1/8”
Axial connection EN 10226 - R1/4”
Radial connection EN 10226 - R1/4”
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Axial connection EN 10226 - R1/8”
Radial connection EN 10226 - R1/8”
-0.16 bar
VACUUM INDICATORS
Seals
Thermostat
A
V
A
NBR
FPM
Without thermostat
-
-
-
-
-
-
-
-
-
Series
BE
BL
BV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
BE HM 41A15 P01 EX
Conguration example 2:
BL HA 71A20 P01
Conguration example 3:
BV R 14 P01
Conguration example 4:
BV H P 20 P01
Type
A A
R
T
M
P
Q
Pressure setting
14
20
15
25
1.4 bar
2.0 bar
Standard type Axial connection pressure gauge
Electrical pressure indicator
Radial connection pressure gauge
With thermal switch
Visual pressure indicator
With wired electrical connection
Electrical/Visual pressure indicator
Visual indicator with automatic reset
Visual indicator with manual reset
1.5 bar
2.5 bar
BAROMETRIC
(
PRESSURE
)
INDICATORS
Seals
Thermostat
H
A
F
HNBR
Without thermostat
With thermostat
-
-
----
--
-- -
- -
-
-
---
- - -
-
-
-
---
- -
-- -
- - -
-
- - -
Electrical connections
30
10
50
41
51
53
52
71
BEA BEM BLBET
BEA-BEM
BEA-BEM
BE
BET
BET
BLA
BLA
BLA
BVA-BVR BVP-BVQ
BVP-BVQ
BE BL BV
Connection Deutsch DT-04-2-P
Connection AMP Superseal series 1.5
Connection via four-core cable
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
CLOGGING INDICATORS RETURN/SUCTION FILTERS
VEB - VLBVEA - VLA
Certications
EX
UL
Without
ATEX certication
UL certication
VLVEB VVVEA21A VEA21V
-
-
-
-
-
-
Certications
EX
UL
Without
ATEX certication
UL certication
BEM-BET BL BVBEA
-
-
-
-
-
-
Clogging Indicators
718
Designation & Ordering code
Series
Series
DE
T2
DL
DV
DT
Conguration example 1:
DE HM 50F12 P01
Conguration example
T2 H
Conguration example 3:
DL VE 71A20 P01
Conguration example 4:
DT HA 70F50 P01
Conguration example 5:
DV VM 70 P01
Type
A A
U
E
M M
Pressure setting
20 2.0 bar
Standard type With automatic reset
Electrical differential pressure indicator
Plug
Standard type 210 bar, UL certied
For high power supply
Electronic differential pressure indicator
With wired electrical connection With manual reset
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
Seals
Seals
H
H
V
V
HNBR
HNBR
FPM
FPM
-
-
-
-
-
-
Electrical connections
20
10
30
50
52
35
51
70
71
DL
DEA
DEA DEU
DE DT
DEM
DEM
DV
-
-
- -
- -
- -
- -
-- -
-- -
-- -
-- -
DLE DTDLA
--
---
---
---
---
--
--
--
--
DLE DTDLADEU
--
-
Thermostat
A
F
Without thermostat
With thermostat
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
CLOGGING INDICATORSRETURN/SUCTION FILTERS
Conguration example 2:
DE VU 50A50 P01 UL
Option
P01
Pxx
MP Filtri standard
Customized
Certications
Without
UL certication
OTHERSDEU
-
-
UL
-
DEA
DEA
DVA
DVA
DTA
DTA
DEM
DEM
DVM
DVM
DLA
DLA
DEU
DEU
DLE
DLE
Clogging Indicators
719
Series
VE
VL
VV
Conguration example 1:
VE AB 50A21 P01 EX
Conguration example 2:
VL AB 71A21 P01
Conguration example 3:
VV S 20 P01
Type VE - VL Type VV
Electrical connections
50
52
B B
51
S
53
71
Vacuum setting
21
20
VL
VL
VL
VL VV
VE
VE
VE
VE
-0.21 bar
Electrical vacuum indicator
Connection EN 175301-803
Vacuum gauge
Electrical/Visual vacuum indicator
Connection EN 10226 - R1/8” Axial connection EN 10226 - R1/8”
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Radial connection EN 10226 - R1/8”
-0.16 bar
VACUUM INDICATORS
Seals
Thermostat
A
A
NBR
Without thermostat
-
-
-
-
-
-
-
-
Series
BE
BL
BV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
BE HM 41A15 P01
Conguration example 2:
BL HA 71A20 P01
Conguration example 3:
BV R 14 P01
Conguration example 4:
BV H P 20 P01
Type
A A
RM
P
Q
Standard type Axial connection pressure gauge
Electrical pressure indicator
Radial connection pressure gauge
Visual pressure indicator
With wired electrical connection
Electrical/Visual pressure indicator
Visual indicator with automatic reset
Visual indicator with manual reset
BAROMETRIC
(
PRESSURE
)
INDICATORS
-
Electrical connections
30
10
50
41
51
53
52
71
BEA BEM BL
BE BL BV
Connection Deutsch DT-04-2-P
Connection AMP Superseal series 1.5
Connection via four-core cable
-
-
-
-
--
-
-
-
-
-
--
-
--
--
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection EN 175301-803, transparent base with lamps 230 Vac
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Pressure setting
14
20
15
25
1.4 bar
2 bar
1.5 bar
2.5 bar
Seals
Thermostat
H
A
HNBR
Without thermostat
-
-
-
-
-
-
-
-
--
-
BEA-BEM
BEA-BEM
BE
BLA
BLA
BLA
BVA-BVR
BVA-BVR
BVP-BVQ
BV
BVP-BVQ
Designation & Ordering code
CLOGGING INDICATORS SPIN-ON FILTERS
Option
P01
Pxx
MP Filtri standard
Customized
Certications
EX
UL
Without
ATEX certication
UL certication
VLVEB VVVEA21A VEA21V
-
-
-
-
-
-
Certications
EX
UL
Without
ATEX certication
UL certication
BEM-BET BL BVBEA
-
-
-
-
-
-
Clogging Indicators
720
Designation & Ordering code
CLOGGING INDICATORSSPIN-ON FILTERS
Series
Series
DE
T2
DL
DV
DT
Conguration example 1:
DE HM 50F12 P01
Conguration example
T2 H
Conguration example 3:
DL VE 71A20 P01
Conguration example 4:
DT HA 70F50 P01
Conguration example 5:
DV VM 70 P01
Type
A A
U
E
M M
Pressure setting
12
20
1.2 bar
2.0 bar
Standard type With automatic reset
Electrical differential pressure indicator
Plug
Standard type 210 bar, UL certied
For high power supply
Electronic differential pressure indicator
With wired electrical connection With manual reset
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
Seals
H
V
HNBR
FPM
-
-
-
-
-
-
DLDE DT DV
Conguration example 2:
DE VU 50A50 P01 UL
Certications
Without
UL certication
OTHERSDEU
-
-
UL
DEA DVADTADEM DVMDLADEU DLE
-
Seals
H
V
HNBR
FPM
-
DEA DVADTADEM DVMDLADEU DLE
DEA DEM
-
DLE DTDLADEU
--
-
Thermostat
A
F
Without thermostat
With thermostat
Electrical connections
20
10
30
50
52
35
51
70
71
DEA DEUDEM
-
- -
- -
- -
- -
-- -
-- -
-- -
-- -
DLE DTDLA
--
---
---
---
---
--
--
--
--
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Option
P01
Pxx
MP Filtri standard
Customized
Clogging Indicators
721
Series
DE
DL
DV
DT
Conguration example 1:
DE HM 50F20 P01
Conguration example 3:
DL VE 71A50 P01
Conguration example 4:
DT HA 70F20 P01
Conguration example 5:
DV VM 50 P01
Electrical differential pressure indicator
Electronic differential pressure indicator
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
LOW & MEDIUM PRESS. FILTERS
Designation & Ordering code
CLOGGING INDICATORS
Type
A A
U
E
S
M M
S
Standard type With automatic reset
Standard type 210 bar, UL certied
For high power supply
Compact version
With wired electrical connection With manual reset
With automatic reset
-
-
-
-
-
-
-
-
DLDE DT DV
Conguration example 2:
DE VU 50A50 P01 UL
Option
P01
Pxx
MP Filtri standard
Customized
Certications
Without
UL certication
OTHERSDEU
-
-
UL
Pressure setting
12
20
25
40
50
1.2 bar
2.0 bar
2.5 bar
4.0 bar
5.0 bar
DEMDEA DVADTADEU DVMDES DVSDLA DLE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Seals
H
V
HNBR
FPM
DEA DEM
-
-
-
DVADT DVMDESDEU DVSDL
DEA DEM
-
DTDESDEU DLA DLE
-
--
-
Thermostat
A
F
Without thermostat
With thermostat
Electrical connections
20
10
30
50
52
35
51
70
71
80
DEA DEM
-
-
-
-
-
--
--
-
-
-
-
- -
DLE DTDESDEU DLA
- -- -
- - -- -
- -- -
- -
--
-
-
-
-- -
-
--
--
-
- -
-
-
-
-
--
--
--
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Connection Stud #10-32 UNF
Series
T2
T4
Conguration example
T2 H
Plug
Plug
PLUGS
Seals
H
A
V
HNBR
NBR
FPM
T2 T4
-
-
-
Clogging Indicators
722
HIGH PRESSURE FILTERS
Designation & Ordering code
CLOGGING INDICATORS
Series
Series
DE
T2
DL
DV
DT
Conguration example 1:
DE HM 50F12 P01
Conguration example
T2 H
Conguration example 3:
DL VE 71A20 P01
Conguration example 4:
DT HA 70F50 P01
Conguration example 5:
DV VM 70 P01
Type
A A
U
E
M M
Pressure setting
50
70
95
5.0 bar
7.0 bar
9.5 bar
Standard type With automatic reset
Electrical differential pressure indicator
Plug
Standard type 210 bar, UL certied
For high power supply
Electronic differential pressure indicator
With wired electrical connection With manual reset
Electrical/Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
PLUGS
Seals
H
V
HNBR
FPM
-
-
-
-
-
-
DLDE DT DV
Conguration example 2:
DE VU 50A50 P01 UL
Certications
Without
UL certication
OTHERSDEU
-
-
UL
DEMDEA DVADTADEU DVMDLA DLE
-
Seals
H
V
HNBR
FPM
-
DEA DVADTADEM DVMDLADEU DLE
DEA DEM
-
DLE DTDLADEU
--
-
Thermostat
A
F
Without thermostat
With thermostat
Electrical connections
20
10
30
50
52
35
51
70
71
DEA DEUDEM
-
- -
- -
- -
- -
-- -
-- -
-- -
-- -
DLE DTDLA
--
---
---
---
---
--
--
--
--
Connection Deutsch DT-04-2-P
Connection AMP Timer Junior
Connection AMP Superseal series 1.5
Connection Deutsch DT-04-3-P
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
Connection IEC 61076-2-101 D (M12)
Connection IEC 61076-2-101 D (M12), black base with lamps 24 Vdc
Option
P01
Pxx
MP Filtri standard
Customized
Clogging Indicators
723
Series
DE
DL
DV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
DE HZ 50A50 P01
Conguration example 2:
DL VX 52A70 P01
Type
X
Pressure setting
Stainless steel standard type 420 bar
Electrical differential pressure indicator
Electrical / Visual differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
Seals
Seals
Y Stainless steel optional type 420 bar -
-
-
-
-
-
-
Electrical connections
50
52
51
DL
DL
DL
DL
DE
DEZ
DEZ
DEZ
DLDEZDEX
DEX
DEX
DEX
DV
DV
DV
DV
-
- -
- -
Thermostat
A Without thermostat
Connection EN 175301-803
Connection EN 175301-803, transparent base with lamps 110 Vdc
Connection EN 175301-803, transparent base with lamps 24 Vdc
H
V
F
HNBR
FPM
MFQ
Z Stainless steel 700 bar (only for FZH)
Series
X2
X3
Conguration example
X2 H
Stainless Steel plug 420 bar
Stainless Steel plug 700 bar (only for FZH)
PLUGS
Seals
F
H
V
MFQ
HNBR
FPM
STAINLESS STEEL HIGH PRESSURE FILTERS
Designation & Ordering code
CLOGGING INDICATORS
50
70
95
5.0 bar
7.0 bar
9.5 bar
Clogging Indicators
724
Series
DE
DV
Option
P01
Pxx
MP Filtri standard
Customized
Conguration example 1:
DE FH 48A50 P01
Conguration example 2:
DV VX 70 P01
Type
X
H
Pressure setting
Stainless steel standard type 420 bar
Stainless steel hazardous area 420 bar
Electrical differential pressure indicator
Visual differential pressure indicator
DIFFERENTIAL PRESSURE INDICATORS
Seals
-
Y Stainless steel optional type 420 bar -
-
-
-
Electrical connections
70
DEH
DEH
DVM
DVM
DE DV
DEH
DEH
DVA
DVA
DVX
DVX
DVY
DVY
-
- - - -
-
70
50
95
7.0 bar
5.0 bar
9.5 bar
-
Thermostat
A
T
Without thermostat
With thermostat
Connection IEC 61076-2-101 D (M12)
F
H
V
MFQ
HNBR
FPM
Series
X2
T2
X3
Conguration example
X2 H
Stainless Steel plug 420 bar
Plug
Stainless Steel plug 700 bar (only for FZH)
PLUGS
Seals
F
H
V
MFQ
HNBR
FPM
48
49
Connection via three-core cable - tting M20x1.5
Connection via four-core cable - tting 1/2” NPT
FILTERS FOR POTENTIALLY EXPLOSIVE ATMOSPHERE
Designation & Ordering code
CLOGGING INDICATORS
A
M
With automatic reset
With manual reset
Clogging Indicators
725
VACUUM INDICATORS
Technical data
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: VEA: NBR/FPM
VEB: NBR
Technical data
- Vacuum setting: 0.21 bar ±10%
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 5 A / 14 Vdc
4 A / 30 Vdc
5 A / 125 Vac
4 A / 250 Vac
- CE certication
- Available Atex product: II 1GD Ex ia IIC Tx Ex ia IIIC Tx °C X
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: VEA: NBR/FPM
VEB: NBR
Technical data
- Vacuum setting: 0.21 bar ±10%
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 5 A / 14 Vdc
4 A / 30 Vdc
5 A / 125 Vac
4 A / 250 Vac
- CE certication
- Available Atex product: II 1GD Ex ia IIC Tx Ex ia IIIC Tx °C X
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R
R R
12 77
12 77
12 73
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R
R R
12 77
12 77
12 73
R
12 77
51: Transparent base with lamps 24 Vdc
52: Transparent base with lamps 110 Vdc
53: Transparent base with lamps 230 Vac
EN 10226 - R1/4”
EN 10226 - R1/4”
EN 10226 - R1/8”
EN 10226 - R1/4”
EN 10226 - R1/8”
R
R
R
Ordering code
Ordering code
Ordering code
VE*50 (EX)
VEA50 UL
VL*51 - VL*52 - VL*53
A/F 27
A/F 27
A/F 27
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R R R
12 77
12 77
12 73
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R R R
12 77
12 77
12 73
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R R R
12 77
12 77
12 73
VE A 21 x A 50 P01
VE A 21 x A 50 P01 EX
VE B 21 A A 50 P01
VE B 21 A A 50 P01 EX
VE A 21 A A 50 P01 UL
VL A 21 x A xx P01
VL B 21 A A xx P01
Hydraulic symbol
Hydraulic symbol
Hydraulic symbol
Electrical symbol
Electrical symbol
Electrical symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Materials
- Body: Brass
- Base: Transparent polyamide
- Contacts: Brass - Polyamide
- Seal: VLA: NBR/FPM
VLB: NBR
Technical data
- Vacuum setting: 0.21 bar ±10%
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Type 51 52 53
- Lamps 24 Vdc 110 Vdc 230 Vac
- Resistive load: 1 A / 24 Vdc 1 A / 110 Vdc 1 A / 230 Vac
GREEN
LAMP
RED
LAMP
Max tightening
torque:
25 N∙m
Max tightening
torque:
25 N∙m
Max tightening
torque:
25 N∙m
Electrical Vacuum Indicator
Connection: EN 175301-803
Electrical Vacuum Indicator
Connection: EN 175301-803
Electrical/Visual Vacuum Indicator
Connection: EN 175301-803
- Certication: ATEX, IECEx
- Certication included in EX version
- Certication: UL
- Certication included in EX version
U
L
®
Clogging Indicators
726
VACUUM INDICATORS
Technical data
Materials
- Case: Black plastic
- Window: Clear plastic
- Dial: White plastic
- Pointer: Black plastic
- Pressure connection: Cu-alloy
- Pressure element: Bourdon tube Cu-alloy soft soldered, C type
- Movement: Cu-alloy
Technical data
- Max working pressure: Steady: -0.7 bar
Fluctuating: -0.6 bar
Short time: -1.0 bar
- Working temperature: Ambienti from -40 °C to +60 °C
Fluid max + 60 °C
Storage from -40 °C to +60 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Accuracy: Class 2.5 according to EN 13190
- Degree of protection: IP31 according to EN 60529
Materials
- Case: Black plastic
- Window: Clear plastic
- Dial: White plastic
- Pointer: Black plastic
- Pressure connection: Cu-alloy
- Pressure element: Bourdon tube Cu-alloy soft soldered, C type
- Movement: Cu-alloy
Technical data
- Max working pressure: Steady: -0.7 bar
Fluctuating: -0.6 bar
Short time: -1.0 bar
- Working temperature: Ambienti from -40 °C to +60 °C
Fluid max + 60 °C
Storage from -40 °C to +60 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Accuracy: Class 2.5 according to EN 13190
- Degree of protection: IP31 according to EN 60529
-0.16
-0.24
-1.01
-0.16
-0.24
-1.01
-12
-18
-76
-12
-18
-76
[cmHg]
[cmHg]
[bar]
[bar]
Axial Vacuum Gauge
Radial Vacuum Gauge
VVA - VVB
VVR - VVS
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R R
R
12 77
12 77
12 73
Electrical/Visual Vacuum Indicator
Connection IEC 61076-2-101 D (M12),
black base with lamps 24 Vdc
EN 10226 - R1/4”
EN 10226 - R1/8”
EN 10226 - R1/4”
EN 10226 - R1/8”
14
11
EN 10226 - R1/4”
EN 10226 - R1/8”
R
R
Connections
Ordering code
Ordering codeA/F
Indicator code
Hydraulic symbol
Hydraulic symbol
Dial scale
Dial scale
Conversion to SI units
Conversion to SI units
VL*71
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
A/F 27
Red
Red
Yellow
Yellow
Green
Green
cmHg
cmHg
1
2
3
4
GREEN
LAMP
RED
LAMP
GREEN
LAMP
RED
LAMP
1
2
3
1
2
3
4
5
R R R
12 77
12 77
12 73
VVA 20 P01
VVB 20 P01
VVR 20 P01
VVS 20 P01
VL A 21 x A 71 P01
VL B 21 A A 71 P01
Hydraulic symbol
Electrical symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: VLA: NBR/FPM
VLB: NBR
Technical data
- Vacuum setting: 0.21 bar ±10%
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: IEC 61076-2-101 D (M12)
- Lamps 24 Vdc (black base)
- Resistive load: 0.4 A / 24 Vdc
GREEN
LAMP
RED
LAMP
Max tightening
torque:
25 N∙m
Clogging Indicators
727
BAROMETRIC (PRESSURE) INDICATORS
Dimensions
Electrical Pressure Indicator
Connection EN 175301-803
Electrical Pressure Indicator
Connection EN 175301-803
Electrical Pressure Indicator
Connection via four-core cable
BEA*50 (EX)
BEA*50 UL
BEM*41
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 40 bar
- Proof pressure: 60 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 5 A / 14 Vdc
4 A / 30 Vdc
5 A / 125 Vac
4 A / 250 Vac
- CE certication
- Available Atex product: I M1 Ex ia I Ma
II 1GD Ex ia IIC Tx Ex ia IIIC Tx °C X
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 40 bar
- Proof pressure: 60 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 5 A / 14 Vdc
4 A / 30 Vdc
5 A / 125 Vac
4 A / 250 Vac
- CE certication
- Available Atex product: I M1 Ex ia I Ma
II 1GD Ex ia IIC Tx Ex ia IIIC Tx °C X
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 40 bar
- Proof pressure: 60 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP67 according to EN 60529
Electrical data
- Electrical connection: Four-core cable
- Resistive load: 5 A / 14 Vdc
4 A / 30 Vdc
5 A / 125 Vac
4 A / 250 Vac
- CE certication
On request this indicator can be provided with main connectors
in use for wirings.
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
EN 10226 - R1/8”
GREY
BLACK
BROWN
YELLOW / GREEN
EN 10226 - R1/8”
10
14 55
77 1000
EN 10226 - R1/8”
GREY
BLACK
BROWN
YELLOW / GREEN
EN 10226 - R1/8”
10
14 55
77 1000
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Hydraulic symbol
Hydraulic symbol
Electrical symbol
Electrical symbol
Electrical symbol
BE A 15 H A 50 P01
BE A 15 H A 50 P01 EX
BE A 20 H A 50 P01
BE A 20 H A 50 P01 EX
BE A 15 H A 50 P01 UL
BE A 20 H A 50 P01 UL
BE M 15 H A 41 P01
BE M 20 H A 41 P01
1.5 bar ±10%
1.5 bar ±10%
2.0 bar ±10%
2.0 bar ±10%
1.5 bar ±10%
2.0 bar ±10%
Settings
Settings
Settings
Ordering code
Ordering code
Ordering code
A/F 27
A/F 27
A/F 27
Max tightening
torque:
25 N∙m
Max tightening
torque:
25 N∙m
Max tightening
torque:
25 N∙m
- Certication: ATEX, IECEx
- Certication included in EX version
- Certication: UL
- Certication included in EX version
U
L
®
Clogging Indicators
728
Dimensions
BAROMETRIC (PRESSURE) INDICATORS
Max tightening
torque:
30 N∙m
Electrical Pressure Indicator
Connection AMP Superseal series 1.5
BET*F10
BE T 20 H F 10 P01
BE T 25 H F 10 P01
2.0 bar ±10%
2.5 bar ±10%
Settings Ordering code
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +100 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: AMP Superseal series 1.5
- Resistive load: 0.5 A / 48 Vdc
- Thermostat condition: Open up to 30 °C
- CE certication
Hydraulic symbol
Electrical symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
Electrical Pressure Indicator
Deutsch DT-04-2-P
Electrical Pressure Indicator
Connection EN 175301-803
BET*F30
BET*F50
BE T 20 H F 30 P01
BE T 25 H F 30 P01
BE T 20 H F 50 P01
BE T 25 H F 50 P01
2.0 bar ±10%
2.5 bar ±10%
2.0 bar ±10%
2.5 bar ±10%
Settings
Settings
Ordering code
Ordering code
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +100 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-2-P
- Resistive load: 0.5 A / 48 Vdc
- Thermostat condition: Open up to 30 °C
- CE certication
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +100 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 0.5 A / 48 Vdc
- Thermostat condition: Open up to 30 °C
- CE certication
Hydraulic symbol
Hydraulic symbol
Electrical symbol
Electrical symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
C
N.C.
C
N.C.
C
N.C.
EN 10226 - R1/8”
9 71
EN 10226 - R1/8”
9 81
EN 10226 - R1/8”
9 79
A/F 24
A/F 24
A/F 24
Thermal lockout
Thermal lockout
Not
connected
Thermal lockout
Max tightening
torque:
30 N∙m
Max tightening
torque:
30 N∙m
Clogging Indicators
729
Dimensions
A/F 11
Electrical/Visual Pressure Indicator
Connection IEC 61076-2-101 D (M12),
black base with lamps 24 Vdc
BL*71
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 40 bar
- Proof pressure: 60 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: IEC 61076-2-101 D (M12)
- Lamps: 24 Vdc (black base)
- Resistive load: 0.4 A / 24 Vdc
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Electrical symbol
Hydraulic symbol
BL A 15 H A 71 P01
BL A 20 H A 71 P01
1.5 bar ±10%
2.0 bar ±10%
Settings Ordering code
A/F 27
Axial Pressure Gauge
BVA
Materials
- Case: Painted Steel
- Window: Clear plastic
- Dial: Painted Steel
- Pointer: Black plastic
- Pressure connection: Brass
- Pressure element: Bourdon tube Cu-alloy sof t soldered, C type
Technical data
- Max working pressure: Static: 7 bar
Fluctuating: 6 bar
Short time: 10 bar
- Working temperature: Ambient from -40 °C to +60 °C
Fluid max +60 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Accuracy: Class 2.5 according to EN 13190
- Degree of protection: IP31 according to EN 60529
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
EN 10226 - R1/8”
EN 10226 - R1/8”
ø 43
ø 43
1525
23 16
EN 10226 - R1/8”
EN 10226 - R1/8”
ø 43ø 43 1525
23 16
BV A 14 P01
BV A 25 P01
BV A 14 P01
BV A 25 P01
1.4 bar ±10%
2.5 bar ±10%
Settings Ordering code
Dial scale
Red
Red
Yellow
Yellow
Green
Green
bar
bar
GREEN
LAMP
RED
LAMP
Max tightening
torque:
25 N∙m
BL*51 - BL*52 - BL*53
Materials
- Body: Brass
- Base: Transparent polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 40 bar
- Proof pressure: 60 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Type 51 52 53
- Lamps 24 Vdc 110 Vdc 230 Vac
- Resistive load: 1 A / 24 Vdc 1 A / 110 Vdc 1 A / 230 Vac
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
4
1
2
3
1
2
3
4
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7710
EN 10226 - R1/8”
7310
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
BL A 15 H A xx P01
BL A 20 H A xx P01
1.5 bar ±10%
2.0 bar ±10%
Settings Ordering code
A/F 27
GREEN
LAMP
RED
LAMP
Max tightening
torque:
25 N∙m
BAROMETRIC (PRESSURE) INDICATORS
51: Transparent base with lamps 24 Vdc
52: Transparent base with lamps 110 Vdc
53: Transparent base with lamps 230 Vac
Electrical/Visual Pressure Indicator
Connection: EN 175301-803
Clogging Indicators
730
Dimensions
Visual Pressure Indicator
BVP - Automatic reset
BVQ - Manual reset
BVP - BVQ
EN 10226 - R1/8”
GREY
BLACK
BROWN
YELLOW / GREEN
EN 10226 - R1/8”
10
14 55
77 1000
EN 10226 - R1/8”
GREY
BLACK
BROWN
YELLOW / GREEN
EN 10226 - R1/8”
10
14 55
77 1000
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Materials
- Body: Brass
- Cover / internal parts: Nylon
- Caps: VMQ
- Seal: HNBR
Technical data
- Reset: BVP - Automatic reset
BVQ - Manual reset
- Max working pressure: 10 bar
- Proof pressure: 15 bar
- Working temperature: From -25 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree of protection: IP45 according to EN 60529
Absence of pressure
(no indicator)
Presence of pressure
(green button rises gradually)
Clogged lter element
(red button risen)
Signals
Hydraulic symbol
BV P 15 H P01
BV Q 15 H P01
BV P 20 H P01
BV Q 20 H P01
1.5 bar ±10%
2.0 bar ±10%
5910
Setting Ordering code
A/F 27
Radial Pressure Gauge
BVR
Materials
- Case: Painted Steel
- Window: Clear plastic
- Dial: Painted Steel
- Pointer: Black plastic
- Pressure connection: Brass
- Pressure element: Bourdon tube Cu-alloy sof t soldered, C type
Technical data
- Max working pressure: Static: 7 bar
Fluctuating: 6 bar
Short time: 10 bar
- Working temperature: Ambient from -40 °C to +60 °C
Fluid max +60 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Accuracy: Class 2.5 according to EN 13190
- Degree of protection: IP31 according to EN 60529
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
EN 10226 - R1/8”
EN 10226 - R1/8”
ø 43
ø 43
1525
23 16
EN 10226 - R1/8”
EN 10226 - R1/8”
ø 43ø 43 1525
23 16
BV R 14 P01
BV R 25 P01
1.4 bar ±10%
2.5 bar ±10%
Settings Ordering code
BV R 14 P01
BV R 25 P01
Dial scale
Red
Red
Yellow
Yellow
Green
Green
bar
bar
Max tightening
torque:
25 N∙m
A/F 11
BAROMETRIC (PRESSURE) INDICATORS
Clogging Indicators
731
DIFFERENTIAL PRESSURE INDICATORS
Dimensions
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
DE A 50 x A 50 P01
DE A 70 x A 50 P01
DE A 95 x A 50 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DE A 12 x A 50 P01
DE A 20 x A 50 P01
1.2 bar ±10%
2.0 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Connection: EN 175301-803
DEA*50
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with  uids: Mineral oils, Synthetic  uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 0.2 A / 115 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
DE H 20 x A 48 P01
DE H 50 x A 48 P01
DE H 70 x A 48 P01
DE H 20 x A 49 P01
DE H 50 x A 49 P01
DE H 70 x A 49 P01
Settings
Settings
Ordering code
Ordering code
Hazardous Area
Electrical Differential Pressure Indicator
Connection via three-core cable -  tting M20x1.5
DEH*48
Electrical data
- Connection via three-core cable -  tting M20x1.5
- Resistive Load: 830 mA / 24 Vdc - 180 mA / 110 Vac
- Electrical Ratings: Ui = 30 Vdc / li = 250 mA / Pi = 1.3 W
- Available ATEX product: II 1 GD Ex ia IIC T6 Ga -60°C ≤ Ta ≤ 80°C
Ex ia IIC T4 Ga -60°C ≤ Ta ≤ 125°C
II 2 GD Ex db IIC T6* Gb Ex tb IIIC T85°C* Db
(Tamb : = -60°C to +70°C)* IP66/67
* alternative T/Class and ambients T4, T135°C
(Tamb = -60°C to +120°C)
Hydraulic symbol
Hydraulic symbol
Electrical symbol
Electrical symbol
Red
Red
Green
White
White
Black
Black
Hazardous Area
Electrical Differential Pressure Indicator
Connection via four-core cable -  tting 1/2” NPT
DEH*49
Electrical data
- Connection via four-core cable -  tting 1/2” NPT
- Resistive Load: 830 mA / 24 Vdc - 180 mA / 110 Vac
- Max voltage 150 Vac/dc
- Power 20 W
- Available ATEX product: II 1 GD Ex ia IIC T6 Ga -60°C ≤ Ta ≤ 80°C
Ex ia IIC T4 Ga -60°C ≤ Ta ≤ 125°C
II 2 GD Ex db IIC T6* Gb Ex tb IIIC T85°C* Db
(Tamb : = -60°C to +70°C)* IP66/67
* alternative T/Class and ambients T4, T135°C
(Tamb = -60°C to +120°C)
bar ±10%
bar ±10%
bar ±10%
bar ±10%
bar ±10%
bar ±10%
2.0
5.0
7.0
2.0
5.0
7.0
M20 x 1.5
A/F 25
Max tightening
torque: 100 N∙m
min. 110
88
exible cable 5000 to A
A/F 25
Max tightening
torque: 100 N∙m
min. 110
88
1/2” NPT
exible cable 5000 to A
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -60 °C to +125 °C
- Compatibility with  uids: Mineral oils, Synthetic  uids
HFB and HFC according to ISO 2943
- Temperature class: T4 (135 °C) and T6 (85 °C)
- Degree of protection: IP 66/67/68 according to EN 60529
- Connection type: Three-core cable,  tting M20x1.5
- Contact type: SPCO/SPDT (Hermetically sealed - Volt-free contacts)
Materials
- Body: AISI 316L
- Contacts: Rhodium
- Seal: FPM - MFQ
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -60 °C to +120 °C : ATEX, IECEx, EAC TR CU, INMETRO
From -60 °C to +105 °C : UL/CSA
- Compatibility with  uids: Mineral oils, Synthetic  uids
HFB and HFC according to ISO 2943
- Temperature class: T4 (135 °C) and T6 (85 °C)
- Degree of protection: IP 66/67/68 according to EN 60529
- Connection type: Four-core cable, tting 1/2” NPT
- Contact type: SPCO/SPDT (Hermetically sealed - Volt-free contacts)
Materials
- Body: AISI 316L
- Contacts: Rhodium
- Seal: FPM - MFQ
- Certi cation / Approvals:
ATEX, IECEx, EAC TR CU, INMETRO,
UL/CSA Class I Division 1 Groups A-D,
UL/CSA Class II Division 1 Groups E-G
- Certi cation included as standard
- Certi cation / Approvals:
ATEX, IECEx, EAC TR CU, INMETRO
- Certi cation included as standard
A/F 30
Max tightening
torque: 65 N∙m
Clogging Indicators
732
DIFFERENTIAL PRESSURE INDICATORS
Dimensions
DE M 12 x F 10 P01
DE M 20 x F 10 P01
DE M 50 x F 10 P01
DE M 70 x F 10 P01
DE M 95 x F 10 P01
DE M 12 x F 20 P01
DE M 20 x F 20 P01
DE M 50 x F 20 P01
DE M 70 x F 20 P01
DE M 95 x F 20 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Connection: AMP Superseal series 1.5
DEM*F10
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: AMP Superseal series 1.5
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
- Thermal lockout: Normally open up to 30 °C (option “F”)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Thermal lockout
Settings Ordering code
Electrical Differential Pressure Indicator
AMP Time junior
DEM*F20
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: AMP Time junior
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
- Thermal lockout: Normally open up to 30 °C (option “F”)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Thermal lockout
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 290 to “A”
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 290 to “A”
A/F 25
Max tightening
torque: 100 N∙m
63
Hydraulic symbol
Electrical symbol
Electrical data
- Connection IEC 61076-2-101 D (M12)
- Resistive Load: 830 mA / 24 Vdc - 180 mA / 110 Vdc
- Electrical Ratings: Ui = 30 Vdc
li = 250 mA
Pi = 1.3 W
- Available ATEX product: II 1 GD Ex ia IIC T6 Ga -60°C ≤ Ta ≤ 80°C
Ex ia IIC T4 Ga -60°C ≤ Ta ≤ 125°C
II 2 GD Ex db IIC T6* Gb Ex tb IIIC T85°C* Db
(Tamb : = -60°C to +70°C)* IP66/67
* alternative T/Class and ambients T4, T135°C
(Tamb = -60°C to +120°C)
DEH*70
Hazardous Area
Electrical Differential Pressure Indicator
Connection IEC 61076-2-101 D (M12)
DE H 20 x A 70 P01
DE H 50 x A 70 P01
DE H 70 x A 70 P01
Settings Ordering code
bar ±10%
bar ±10%
bar ±10%
2.0
5.0
7.0
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -60 °C to +80 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Temperature class: T6 (85 °C)
- Degree of protection: IP 66/67 according to EN 60529
- Connection type: IEC 61076-2-101 D (M12)
- Contact type: SPCO/SPDT (Hermetically sealed - Volt-free contacts)
Materials
- Body: AISI 316L with internal engineered resin switch
- Contacts: Rhodium
- Seal: FPM - MFQ
- Certication / Approvals:
ATEX, IECEx, EAC TR CU, INMETRO
- Certication included as standard
Clogging Indicators
733
Dimensions
Settings Ordering code
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Electrical Differential Pressure Indicator
Deutsch DT-04-2-P
DEM*F30
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-2-P
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
- Thermal lockout: Normally open up to 30 °C (option “F”)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
Thermal lockout
Settings Ordering code
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Electrical Differential Pressure Indicator
Deutsch DT-04-3-P
DEM*F35
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-3-P
- Resistive load: 0.2 A / 115 Vdc
- Switching type: SPDT contact
- Thermal lockout: Normally open up to 30 °C (option “F”)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 240 to “A”
exible cable: 240 to “A”
Thermal lockout
DE M 12 x F 30 P01
DE M 20 x F 30 P01
DE M 50 x F 30 P01
DE M 70 x F 30 P01
DE M 95 x F 30 P01
DE M 12 x F 35 P01
DE M 20 x F 35 P01
DE M 50 x F 35 P01
DE M 70 x F 35 P01
DE M 95 x F 35 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DIFFERENTIAL PRESSURE INDICATORS
DE M 12 x A 10 P01
DE M 20 x A 10 P01
DE M 50 x A 10 P01
DE M 70 x A 10 P01
DE M 95 x A 10 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Connection: AMP Superseal series 1.5
DEM*A10
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: AMP Superseal series 1.5
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 290 to “A”
Clogging Indicators
734
Dimensions
Settings Ordering code
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Electrical Differential Pressure Indicator
Deutsch DT-04-2-P
DEM*A30
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-2-P
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
Settings Ordering code
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
Electrical Differential Pressure Indicator
Deutsch DT-04-3-P
DEM*A35
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-3-P
- Resistive load: 0.2 A / 115 Vdc
- Switching type: SPDT contact
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 240 to “A”
exible cable: 240 to “A”
DE M 12 x A 30 P01
DE M 20 x A 30 P01
DE M 50 x A 30 P01
DE M 70 x A 30 P01
DE M 95 x A 30 P01
DE M 12 x A 35 P01
DE M 20 x A 35 P01
DE M 50 x A 35 P01
DE M 70 x A 35 P01
DE M 95 x A 35 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DIFFERENTIAL PRESSURE INDICATORS
DE M 12 x A 20 P01
DE M 20 x A 20 P01
DE M 50 x A 20 P01
DE M 70 x A 20 P01
DE M 95 x A 20 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
AMP Time junior
DEM*A20
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
Electrical data
- Electrical connection: AMP Time junior
- Resistive load: 0.2 A / 115 Vdc
- Switching type: Normally open contacts (NC on request)
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
1
2
1
2
1
2
A
C
B
1
2
1
2
1
2
A
C
B
75
A/F 28
Max tightening
torque: 65 N∙m
exible cable: 290 to “A”
Clogging Indicators
735
DE S 12 H A 30 P01
DE S 25 H A 30 P01
DE S 40 H A 30 P01
1.2 bar ±10%
2.5 bar ±10%
4.0 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Deutsch DT-04-2-P
DES*30
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 16 bar
- Proof pressure: 24 bar
- Burst pressure: 48 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP67 according to EN 60529
Electrical data
- Electrical connection: Deutsch DT-04-2-P
- Resistive load: 0.2 A / 24 Vdc
- Switching type: Normally open contacts (NC on request)
A/F 19
Max tightening
torque: 20 N∙m
DE S 12 H A 80 P01
DE S 25 H A 80 P01
DE S 40 H A 80 P01
1.2 bar ±10%
2.5 bar ±10%
4.0 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Stud #10-32 UNF
DES*80
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 16 bar
- Proof pressure: 24 bar
- Burst pressure: 48 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP67 according to EN 60529
Electrical data
- Electrical connection: Stud #10-32 UNF
- Resistive load: 0.2 A / 24 Vdc
- Switching type: Normally open contacts (NC on request)
A/F 19
Max tightening
torque: 20 N∙m
Dimensions
DIFFERENTIAL PRESSURE INDICATORS
DE S 12 H A 10 P01
DE S 25 H A 10 P01
DE S 40 H A 10 P01
1.2 bar ±10%
2.5 bar ±10%
4.0 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
AMP Superseal series 1.5
DES*10
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Contacts: Silver
- Seal: HNBR
Technical data
- Max working pressure: 16 bar
- Proof pressure: 24 bar
- Burst pressure: 48 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP67 according to EN 60529
Electrical data
- Electrical connection: AMP Superseal series 1.5
- Resistive load: 0.2 A / 24 Vdc
- Switching type: Normally open contacts (NC on request)
A/F 19
Max tightening
torque: 20 N∙m
Clogging Indicators
736
DE U 20 V A 50 P01 UL
DE U 50 V A 50 P01 UL
DE U 70 V A 50 P01 UL
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Connection EN 175301-803
DEU*50 UL
Materials
- Body: Brass
- Base: Black Polyamide
- Contacts: Silver
- Seal: FPM
Technical data
- Max working pressure: 210 bar
- Proof pressure: 220 bar
- Burst pressure: 880 bar
- Working temperature: From --25 °C to +85 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 3 A / 30 Vdc
3 A / 125 Vac
3 (3) A / 250 Vac
- Certication: UL
- Certication included as standard
Hydraulic symbol
Electrical symbol
A/F 30
Max tightening
torque: 50 N∙m
U
L
®
Dimensions
DIFFERENTIAL PRESSURE INDICATORS
DE Z 50 x A 50 P01
DE Z 70 x A 50 P01
DE Z 95 x A 50 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DE Z 12 x A 50 P01
DE Z 20 x A 50 P01
1.2 bar ±10%
2.0 bar ±10%
Electrical Differential Pressure Indicator
Connection: EN 175301-803
DEZ*50
Materials
- Body: AISI 316L
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - MFQ
Technical data
- Max working pressure: 700 bar
- Proof pressure: 1050 bar
- Burst pressure: 2100 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFA, HFB, HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 0.2 A / 115 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
A/F 30
Max tightening
torque: 110 N∙m
DE X 12 x A 50 P01
DE X 20 x A 50 P01
DE X 50 x A 50 P01
DE X 70 x A 50 P01
DE X 95 x A 50 P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
Electrical Differential Pressure Indicator
Connection: EN 175301-803
DEX*50
Materials
- Body: AISI 316L
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - MFQ
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Resistive load: 0.2 A / 115 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
A/F 30
Max tightening
torque: 65 N∙m
Clogging Indicators
737
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
Dimensions
Electrical/Visual Differential pressure indicator
Connection IEC 61076-2-101 D (M12),
black base with lamps 24 Vdc
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
A/F 30
Max tightening
torque: 65 N∙m
DL A 50 x A 71 P01
DL A 70 x A 71 P01
DL A 95 x A 71 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DL A 12 x A 71 P01
DL A 20 x A 71 P01
1.2 bar ±10%
2.0 bar ±10%
DLA*71
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: IEC 61076-2-101 D (M12)
- Lamps 24 Vdc (black base)
- Resistive load: 0.4 A / 24 Vdc
Hydraulic symbol
Electrical symbol
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
GREEN
LAMP
GREEN
LAMP
RED
LAMP
RED
LAMP
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
DLA*51 - DLA*52
Materials
- Body: Brass
- Base: Transparent polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with fluids: Mineral oils, Synthetic fluids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Type 51 52
- Lamps 24 Vdc 110 Vdc
- Resistive load: 1 A / 24 Vdc 1 A / 110 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
A/F 30
Max tightening
torque: 65 N∙m
DL A 50 x A xx P01
DL A 70 x A xx P01
DL A 95 x A xx P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DL A 12 x A xx P01
DL A 20 x A xx P01
1.2 bar ±10%
2.0 bar ±10%
Electrical/Visual Differential Pressure Indicator
Without term. Connections: EN 175301-803
1
2
3
1
2
3
58
58
58
59
A/F 32
Max tightening
torque: 95 N∙m
DL E 50 x A 50 P01
DL E 70 x A 50 P01
DL E 95 x A 50 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DL E 12 x A 50 P01
DL E 20 x A 50 P01
1.2 bar ±10%
2.0 bar ±10%
DLE*A50
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Electrical data
- Electrical connections: EN 175301-803
- Resistive load: 5 A / 250 Vac
- Available the connector with lamps
Hydraulic symbol
Electrical symbol
1
2
3
1
2
3
58
58
58
59
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
DIFFERENTIAL PRESSURE INDICATORS
51: Transparent base with lamps 24 Vdc
52: Transparent base with lamps 110 Vdc
Electrical/Visual Differential Pressure Indicator
Connection: EN 175301-803
Clogging Indicators
738
Dimensions
Electrical/Visual Differential Pressure Indicator
With term. Connections: EN 175301-803
1
2
3
1
2
3
58
58
58
59
A/F 32
Max tightening
torque: 95 N∙m
59
DL E 50 x F 50 P01
DL E 70 x F 50 P01
DL E 95 x F 50 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DL E 12 x F 50 P01
DL E 20 x F 50 P01
1.2 bar ±10%
2.0 bar ±10%
DLE*F50
Materials
- Body: Brass
- Base: Black polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Electrical data
- Electrical connections: EN 175301-803
- Resistive load: 5 A / 250 Vac
- Thermal lockout setting: +30 °C
Hydraulic symbol
Electrical symbol
1
2
3
1
2
3
58
58
58
59
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Thermal lockout
DIFFERENTIAL PRESSURE INDICATORS
DL Z 50 x A 5x P01
DL Z 70 x A 5x P01
DL Z 95 x A 5x P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DL Z 12 x A 5x P01
DL Z 20 x A 5x P01
1.2 bar ±10%
2.0 bar ±10%
Settings Ordering code
DLZ*51 - DLZ*52
Materials
- Body: AISI 316L
- Base: Transparent polyamide
- Contacts: Silver
- Seal: HNBR - MFQ
Technical data
- Max working pressure: 700 bar
- Proof pressure: 1050 bar
- Burst pressure: 2100 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Type 51 52
- Lamps 24 Vdc 110 Vdc
- Resistive load: 1 A / 24 Vdc 1 A / 110 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
A/F 30
Max tightening
torque: 110 N∙m
DL X 50 x A 5x P01
DL X 70 x A 5x P01
DL X 95 x A 5x P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DL X 12 x A 5x P01
DL X 20 x A 5x P01
1.2 bar ±10%
2.0 bar ±10%
Settings Ordering code
DLX*51 - DLX*52
Materials
- Body: AISI 316L
- Base: Transparent polyamide
- Contacts: Silver
- Seal: HNBR - MFQ
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP66 according to EN 60529
IP69K according to ISO 20653
Electrical data
- Electrical connection: EN 175301-803
- Type 51 52
- Lamps 24 Vdc 110 Vdc
- Resistive load: 1 A / 24 Vdc 1 A / 110 Vdc
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Hydraulic symbol
Electrical symbol
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
3
2
1
3
2
1
3
1
2
5
4
4
50
53
53
A/F 30
Max tightening
torque: 65 N∙m
GREEN
LAMP
RED
LAMP
51: Transparent base with lamps 24 Vdc
52: Transparent base with lamps 110 Vdc
51: Transparent base with lamps 24 Vdc
52: Transparent base with lamps 110 Vdc
Electrical/Visual Differential Pressure Indicator
Connection: EN 175301-803
Electrical/Visual Differential Pressure Indicator
Connection: EN 175301-803
Clogging Indicators
739
Dimensions
Electronic Differential Pressure Indicator
Connection: IEC 61076-2-101 D (M12)
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
A/F 30
Max tightening
torque: 50 N∙m
DT A 50 x F 70 P01
DT A 70 x F 70 P01
DT A 95 x F 70 P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DT A 12 x F 70 P01
DT A 20 x F 70 P01
1.2 bar ±10%
2.0 bar ±10%
Visual Differential Pressure Indicator
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
DTA*F70
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Contacts: Silver
- Seal: HNBR - FPM
Technical data
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP67 according to EN 60529
Electrical data
- Electrical connection: IEC 61076-2-101 D (M12)
- Power supply: 24 Vdc
- Analogue output: From 4 to 20 mA
- Thermal lockout: 30 °C (all output signals stalled up to 30 °C)
Hydraulic symbol
Electrical symbol
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Digital output
Digital output
A/F 28
Max tightening
torque: 65 N∙m
Green / Red
clogging indicator
Settings Ordering code
DV A 12 x P01
DV A 20 x P01
DV A 50 x P01
DV A 70 x P01
DV A 95 x P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DVA
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Seal: HNBR - FPM
Technical data
- Reset: Automatic reset
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Hydraulic symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Visual Differential Pressure Indicator
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
A/F 30
Max tightening
torque: 65 N∙m
Red
clogging indicator
DV M 50 x P01
DV M 70 x P01
DV M 95 x P01
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
DV M 12 x P01
DV M 20 x P01
1.2 bar ±10%
2.0 bar ±10%
DVM
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Seal: HNBR - FPM
Technical data
- Reset: Manual reset
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Hydraulic symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
DIFFERENTIAL PRESSURE INDICATORS
Clogging Indicators
740
Dimensions
DV S 12 H P01
DV S 25 H P01
DV S 40 H P01
1.2 bar ±10%
2.5 bar ±10%
4.0 bar ±10%
Settings Ordering code
Visual Differential Pressure Indicator
DVS
Materials
- Body: Brass
- Internal parts: Brass - Polyamide
- Seal: HNBR
Technical data
- Reset: Automatic reset
- Max working pressure: 16 bar
- Proof pressure: 24 bar
- Burst pressure: 48 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP67 according to EN 60529
Hydraulic symbol
A/F 17
Max tightening
torque: 20 N∙m
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
Clear / Red
clogging indicator
DIFFERENTIAL PRESSURE INDICATORS
Settings Ordering code
Visual Differential Pressure Indicator
DVY
Materials
- Body: AISI 316L
- Internal parts: AISI 316L - Polyamide
- Seal: HNBR - MFQ
Technical data
- Reset: Manual reset
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Hydraulic symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
A/F 30
Max tightening
torque: 65 N∙m
Red
clogging
indicator
DV Y 12 x P01
DV Y 20 x P01
DV Y 50 x P01
DV Y 70 x P01
DV Y 95 x P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Settings Ordering code
Visual Differential Pressure Indicator
DVX
Materials
- Body: AISI 316L
- Internal parts: AISI 316L - Polyamide
- Seal: HNBR - MFQ
Technical data
- Reset: Automatic reset
- Max working pressure: 420 bar
- Proof pressure: 630 bar
- Burst pressure: 1260 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Hydraulic symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
3
4
2
5
1
+24 Vdc
4 20 mA
75% - N.O.
100% - N.O.
0 Vdc
÷
47
39
34
A/F 28
Max tightening
torque: 65 N∙m
Green / Red
clogging indicator
DV X 12 x P01
DV X 20 x P01
DV X 50 x P01
DV X 70 x P01
DV X 95 x P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
Clogging Indicators
741
Dimensions
DVZ
Settings Ordering code
Visual Differential Pressure Indicator
Materials
- Body: AISI 316L
- Internal parts: AISI 316L - Polyamide
- Seal: HNBR - MFQ
Technical data
- Reset: Automatic reset
- Max working pressure: 700 bar
- Proof pressure: 1050 bar
- Burst pressure: 2100 bar
- Working temperature: From -25 °C to +110 °C
- Compatibility with uids: Mineral oils, Synthetic uids
HFB and HFC according to ISO 2943
- Degree protection: IP65 according to EN 60529
Hydraulic symbol
1
2
3
1
2
3
1
2
3
1
2
3
4
5
1
2
A/F 30
Max tightening
torque:
110 N∙m
Green / Red
clogging
indicator
DV Z 12 x P01
DV Z 20 x P01
DV Z 50 x P01
DV Z 70 x P01
DV Z 95 x P01
1.2 bar ±10%
2.0 bar ±10%
5.0 bar ±10%
7.0 bar ±10%
9.5 bar ±10%
DIFFERENTIAL PRESSURE INDICATORS
Clogging Indicators
742
Dimensions
PLUGS
Seal Ordering code
Stainless Steel plug 700 bar (only for FZH)
X3
Materials
- Body:
AISI 316L
- Seal:
HNBR / FPM / MFQ
A/F 30
Max tightening
torque: 110 N∙m
X2 H
X2 V
X2 F
X3 H
X3 V
X3 F
HNBR
FPM
MFQ
HNBR
FPM
MFQ
Seal Ordering code
Stainless Steel plug 420 bar
X2
Materials
- Body:
AISI 316L
- Seal:
HNBR / FPM / MFQ
10A/F30
A/F 30
Max tightening
torque: 50 N∙m
T2 H
T2 V
T4 AHNBR
FPM
NBR
Seal SealOrdering code Ordering code
Plug Plug
T2 T4
Materials
- Body:
Phosphatized steel
- Seal:
HNBR / FPM
Materials
- Body:
Anodized aluminium
- Seal:
NBR
A/F 30
Max tightening
torque: 50 N∙m
10A/F30
10A/F30
A/F 19
Max tightening
torque: 20 N∙m
Clogging Indicators
743
NOTES
Clogging Indicators
744
All data, details and words contained in this publication are provided for use by technically
quali ed personnel at their discretion, without warranty of any kind.
MP Filtri reserves the right to make modi cations to the models and versions of the
described products at any time for both technical and/or commercial reasons.
For updated information please visit our website: www.mp ltri.com
The colors and the pictures of the products are purely indicative.
Any reproduction, partial or total, of this document is strictly forbidden.
All rights are strictly reserved
EN
HQ
ITALY
MP Filtri reserves the right to make modi cations to the models and versions of the described products at any time for both technical and/or commercial reasons.
For updated information please visit our website: www.mp ltri.com. The colors and the pictures of the products are purely indicative.
Any reproduction, partial or total, of this document is strictly forbidden. All rights are strictly reserved
WORLDWIDE
NETWORK
CANADA CHINA FRANCE GERMANY INDIA SINGAPORE
UNITED ARAB EMIRATES
UNITED KINGDOM USA
mp ltri.com
PASSION PERFORM
T
PASSION
PERFORM
T
CLOGGING INDICATORS CATALOGUE
EN
MF001000038
EN - 2025.01