ELECTRIC COMPONENTS | ELECTRONIC CONTROL UNITS
For open and closed circuit applications.
Electronic control units.
Linde controllers from the LINC series are charac-
terised by high mechanical and electrical stability.
The core of the components is formed by a function
and safety controller. LINC control units are used
on their own or in combination with one another,
both for hydraulic and electric drives and
combinations of both drive types. In addition to
the drive components joysticks, pedals and the
combustion engine can be integrated into the
regulation concept. Thanks to efficient mode
selection and an increase of user-friendliness,
they achieve enhanced power utilisation and thus
also reduce pollutant and noise emissions.
Design characteristics
— redundant safety concept with function and safety controller
— preconfigured setup
— operating voltage 8-32 VDC
— protected against reverse polarity
— protection against short-circuits, all inputs protected against
operating voltage and earth
— freely definable switching and proportional outputs
— communication via CAN bus
— conforms to EU directive 2004/108/EC
— resistant against vehicle electrical system impulses in
accordance with ISO 7637-2
— robust and leak proof housing for mobile application
— protection class IP67 as per EN 60529
— resistant against salt spray, hydraulic oil, diesel,
UV radiation, fertiliser
LINC Series LINC 1 LINC 2
Digital inputs 4 x Pull-up 12 x Pull-up
Digital inputs 6 x Pull-down 12 x Pull-down
Analogue inputs 6 x 0-5 V 20 x 0-5 V
Frequency inputs 3 x 0-10 kHz 9 x 0-10 kHz
PWM outputs 7 x max. 2.0 A 32 x max. 2.0 A
Low-Side outputs 4 x max. 0.5 A 8 x max. 1.0 A
External power supply 1 x 5 V 2 x 5 V
Communication 1 x CAN Bus 2 x CAN Bus
Dimensions (approx.) 147 x 140 x 50 mm 230 x 157 x 58 mm
Product advantages
— management of the entire machine drive via just one
electronic control unit
— optimum interaction of hydraulic and electric
drive components from Linde
— high availability and reliability
— can guarantee safety functions up to performance level d
in accordance with DIN EN ISO 13849-1
— can be used in applications in the scope of the German
Regulations Authorising the Use of Vehicles for Road Traffic
(StVZO)
— can be configured to input peripherals customary in the
market
— machine behaviour can be configured on individual basis
— simple parametrising process and diagnostics with LinDiag
®
— suitable for open and closed circuit applications and
combinations of both
39