©2019 ADACONN
®
+ INSERTA
®
All rights reserved. www.adaconn.com / www.inserta.com
CHECK VALVES
THREAD-IN
TYPE
Inserta Products, Inc.
Blue Bell, Pa. 19422
Inserta Products, Inc.
INSERTA
®
ICT Check Valves,
Thread-In Type, with external
SAE threads, can be inserted in
manifolds, subplates, flanges or
integrated valve systems. This
compact design eliminates ex-
ternal leak points associated
with line mounted check valves.
These disc check valves are also
available with a fixed orifice
for customer’s specific quantity
requirement.
INSERTA
®
ICT Check Valves,
Thread-In Type,are all steel con-
struction with hardened, lapped
discs and seats providing posi-
tive fluid shut off. They come
complete with a sealing O-ring.
CHECK VALVES
THREAD-IN
TYPE
CRACKING PRESSURE
015 = 15 PSI (STANDARD)
030 30= PSI
060 = 60 PSI
090 = 90 PSI
SEAL COMPOUND
N = BUNA-N (STANDARD)
V = VITON
NOMINAL SIZE
INSERTA
®
DESIGN CODE
ORDERING INFORMATION
ICT-B-24-N015-RO
}
Optional Longer
Check Valve
FLOW CONTROL OPTION
R = FIXED RESTRICTIVE ORIFICE
O = DIAMETER (INCH) OF THE FIXED
ORIFICE. CUSTOMER MUST SPECIFY
THE ORIFICE DIAMETER.
SEE "RØ" ON DATA SHEET FOR
ORIFICE DATA.
(OMIT FOR STANDARD CHECK VALVE)
02 = 5/16 - 24 16 = 1 5/16 - 12
03 = 3/8 - 24 20 = 1 5/8 - 12
04 = 7/16 - 20 24 = 1 7/8 - 12
06 = 9/16 - 18 32 = 2 1/2 - 12
08 = 3/4 - 16 40 = 3 - 12
10 = 7/8 - 14 48 = 3 1/2 - 12
12 = 1 1/16 - 12
54
(Thread Size)
007 = 7 PSI
003 = 3 PSI
CHECK VALVES
THREAD-IN TYPE
©2019 ADACONN
®
+ INSERTA
®
All rights reserved. www.adaconn.com / www.inserta.com
Inserta Products, Inc.
Blue Bell, Pa. 19422
CHECK VALVES
THREAD-IN
TYPE
In applications where the valve is subject to sudden shock opening or
closing (e.g. Accumulator System) the nominal rated fl ow must not be
exceeded and a minimum cracking pressure of 15 PSI is required.
02 .125 .255 .412 – 5/16-24 .291
03 .190 .345 .428 – 3/8-24 .291
04 .188 .389 .435 .630 7/16-20 .275
06 .281 .508 .455 .710 9/16-18 .275
08 .406 .689 .535 .750 3/4-16 .335
10 .500 .804 .630 .770 7/8-14 .415
12 .625 .978 .750 1.045 1 1/16-12 .495
16 .813 1.228 .910 1.340 1 5/16-12 .590
20 1.031 1.541 1.420 2.440 1 5/8-12 1.025
24 1.250 1.798 1.655 3.000 1 7/8-12 1.420
32 1.750 2.416 2.520 – 2 1/2-12 1.750
40 2.062 2.895 2.988 – 3-12 1.875
48 2.500 3.395 3.113 – 3 1/2-12 1.875
NOMINAL FLOW RATES
ARE WITH A ΔP OF
30 TO 40 PSI
OPERATING MEDIUM:
HYDRAULIC FLUID
VISCOSITY RANGE:
50 SSU TO 2000 SSU
CRACKING PRESSURE:
3 PSI, 7 PSI, 15 PSI (STANDARD)
OR 30 PSI.
*60 PSI & 90 PSI, OPTIONAL WITH
LONGER CHECK VALVE.
VALVE J K L L1* M N
SIZE -.005
MACHINED CAVITY DIMENSIONS
MOUNTING POSITION:
OPTIONAL
MAXIMUM OPERATING PRESSURE:
5000 PSI (Contact the Factory for
pressures up to 7250 PSI)
TEMPERATURE RANGE:
NOTE: MINIMUM ORFICE = .016 DIAMETER
NOMINAL INSTALLA- SEATING
VALVE FLOW
RO
O-RING SIZE TION TORQUE
SIZE (GPM) A B B1 C F G H MAX T NO. (mm) TOOL LB-FT
02 1.0 5/16-24 .412 — .245 4 .06 .175 .024 .270 (4.5x1) IMT-C-02 .5–1.
03 1.8 3/8-24 .428 — .333 4 .07 .224 .039 .270 (6.2X1) IMT-C-03 .5–1.
04 3.0 7/16-20 .435 .630 .376 4 .10 .228 .039 .255 010 IMT-C-04 1–2
06 6.0 9/16-18 .455 .710 .494 6 .12 .328 .078 .255 012 IMT-C-06 1–2
08 12 3/4-16 .535 .750 .673 8 .15 .453 .078 .285 (13x2) IMT-C-08 2–3
10 17 7/8-14 .630 .770 .787 8 .17 .565 .078 .350 (16x2) IMT-C-10 7–8
12 25 1 1/16-12 .750 1.045 .963 8 .22 .693 .140 .430 116 IMT-D-12 16–17
16 35 1 5/16-12 .910 1.340 1.210 9 .28 .875 .218 .510 213 IMT-D-16 27–29
20 63 1 5/8-12 1.420 2.440 1.535 10 .31 1.161 .275 .940 219 IMT-E-20 45–50
24 80 1 7/8-12 1.655 3.000 1.769 10 .37 1.340 .394 1.055 222 IMT-E-24 80–90
32 135 2 1/2-12 2.520 — 2.391 .50 1.804 .394 1.531 227 IMT-E-32 090–100
40 155 3-12 2.988 — 2.883 10 .59 2.187 .394 1.750 231 IMT-E-40 300–340
48 175 3 1/2-12 3.113 — 3.385 10 .69 2.562 .394 1.750 235 IMT-E-48 400–430
*
VALVE DIMENSIONS
55
SEE PAGE 72 FOR
INSTALLATION TOOL
ORDERING INFORMATION
CHECK VALVES
70)
10
–22°F (–30°C) To 175°F (80°C)
(Depending on seal material)
Inserta Products, Inc.
Blue Bell, Pa. 19422
CHECK VALVES
THREAD-IN
TYPE
In applications where the valve is subject to sudden shock opening or
closing (e.g. Accumulator System) the nominal rated flow must not be
exceeded and a minimum cracking pressure of 15 PSI is required.
02 .125 .255 .412 – 5/16-24 .291
03 .190 .345 .428 – 3/8-24 .291
04 .188 .389 .435 .630 7/16-20 .275
06 .281 .508 .455 .710 9/16-18 .275
08 .406 .689 .535 .750 3/4-16 .335
10 .500 .804 .630 .770 7/8-14 .415
12 .625 .978 .750 1.045 1 1/16-12 .495
16 .813 1.228 .910 1.340 1 5/16-12 .590
20 1.031 1.541 1.420 2.440 1 5/8-12 1.025
24 1.250 1.798 1.655 3.000 1 7/8-12 1.420
32 1.750 2.416 2.520 – 2 1/2-12 1.750
40 2.062 2.895 2.988 – 3-12 1.875
48 2.500 3.395 3.113 – 3 1/2-12 1.875
NOMINAL FLOW RATES
ARE WITH A ΔP OF
30 TO 40 PSI
OPERATING MEDIUM:
HYDRAULIC FLUID
VISCOSITY RANGE:
50 SSU TO 2000 SSU
CRACKING PRESSURE:
3 PSI, 7 PSI, 15 PSI (STANDARD)
OR 30 PSI.
*60 PSI & 90 PSI, OPTIONAL WITH
LONGER CHECK VALVE.
VALVE J K L L1* M N
SIZE -.005
MACHINED CAVITY DIMENSIONS
MOUNTING POSITION:
OPTIONAL
MAXIMUM OPERATING PRESSURE:
5000 PSI (Contact the Factory for
pressures up to 7250 PSI)
TEMPERATURE RANGE:
NOTE: MINIMUM ORFICE = .016 DIAMETER
NOMINAL INSTALLA- SEATING
VALVE FLOW
RO
O-RING SIZE TION TORQUE
SIZE (GPM) A B B1 C F G H MAX T NO. (mm) TOOL LB-FT
02 1.0 5/16-24 .412 — .245 4 .06 .175 .024 .270 (4.5x1) IMT-C-02 .5–1.
03 1.8 3/8-24 .428 — .333 4 .07 .224 .039 .270 (6.2X1) IMT-C-03 .5–1.
04 3.0 7/16-20 .435 .630 .376 4 .10 .228 .039 .255 010 IMT-C-04 1–2
06 6.0 9/16-18 .455 .710 .494 6 .12 .328 .078 .255 012 IMT-C-06 1–2
08 12 3/4-16 .535 .750 .673 8 .15 .453 .078 .285 (13x2) IMT-C-08 2–3
10 17 7/8-14 .630 .770 .787 8 .17 .565 .078 .350 (16x2) IMT-C-10 7–8
12 25 1 1/16-12 .750 1.045 .963 8 .22 .693 .140 .430 116 IMT-D-12 16–17
16 35 1 5/16-12 .910 1.340 1.210 9 .28 .875 .218 .510 213 IMT-D-16 27–29
20 63 1 5/8-12 1.420 2.440 1.535 10 .31 1.161 .275 .940 219 IMT-E-20 45–50
24 80 1 7/8-12 1.655 3.000 1.769 10 .37 1.340 .394 1.055 222 IMT-E-24 80–90
32 135 2 1/2-12 2.520 — 2.391 .50 1.804 .394 1.531 227 IMT-E-32 090–100
40 155 3-12 2.988 — 2.883 10 .59 2.187 .394 1.750 231 IMT-E-40 300–340
48 175 3 1/2-12 3.113 — 3.385 10 .69 2.562 .394 1.750 235 IMT-E-48 400–430
*
VALVE DIMENSIONS
55
SEE PAGE 72 FOR
INSTALLATION TOOL
ORDERING INFORMATION
CHECK VALVES
70)
10
–22°F (–30°C) To 175°F (80°C)
(Depending on seal material)
Inserta Products, Inc.
Blue Bell, Pa. 19422
CHECK VALVES
THREAD-IN
TYPE
In applications where the valve is subject to sudden shock opening or
closing (e.g. Accumulator System) the nominal rated flow must not be
exceeded and a minimum cracking pressure of 15 PSI is required.
02 .125 .255 .412 – 5/16-24 .291
03 .190 .345 .428 – 3/8-24 .291
04 .188 .389 .435 .630 7/16-20 .275
06 .281 .508 .455 .710 9/16-18 .275
08 .406 .689 .535 .750 3/4-16 .335
10 .500 .804 .630 .770 7/8-14 .415
12 .625 .978 .750 1.045 1 1/16-12 .495
16 .813 1.228 .910 1.340 1 5/16-12 .590
20 1.031 1.541 1.420 2.440 1 5/8-12 1.025
24 1.250 1.798 1.655 3.000 1 7/8-12 1.420
32 1.750 2.416 2.520 – 2 1/2-12 1.750
40 2.062 2.895 2.988 – 3-12 1.875
48 2.500 3.395 3.113 – 3 1/2-12 1.875
NOMINAL FLOW RATES
ARE WITH A ΔP OF
30 TO 40 PSI
OPERATING MEDIUM:
HYDRAULIC FLUID
VISCOSITY RANGE:
50 SSU TO 2000 SSU
CRACKING PRESSURE:
3 PSI, 7 PSI, 15 PSI (STANDARD)
OR 30 PSI.
*60 PSI & 90 PSI, OPTIONAL WITH
LONGER CHECK VALVE.
VALVE J K L L1* M N
SIZE -.005
MACHINED CAVITY DIMENSIONS
MOUNTING POSITION:
OPTIONAL
MAXIMUM OPERATING PRESSURE:
5000 PSI (Contact the Factory for
pressures up to 7250 PSI)
TEMPERATURE RANGE:
NOTE: MINIMUM ORFICE = .016 DIAMETER
NOMINAL INSTALLA- SEATING
VALVE FLOW
RO
O-RING SIZE TION TORQUE
SIZE (GPM) A B B1 C F G H MAX T NO. (mm) TOOL LB-FT
02 1.0 5/16-24 .412 — .245 4 .06 .175 .024 .270 (4.5x1) IMT-C-02 .5–1.
03 1.8 3/8-24 .428 — .333 4 .07 .224 .039 .270 (6.2X1) IMT-C-03 .5–1.
04 3.0 7/16-20 .435 .630 .376 4 .10 .228 .039 .255 010 IMT-C-04 1–2
06 6.0 9/16-18 .455 .710 .494 6 .12 .328 .078 .255 012 IMT-C-06 1–2
08 12 3/4-16 .535 .750 .673 8 .15 .453 .078 .285 (13x2) IMT-C-08 2–3
10 17 7/8-14 .630 .770 .787 8 .17 .565 .078 .350 (16x2) IMT-C-10 7–8
12 25 1 1/16-12 .750 1.045 .963 8 .22 .693 .140 .430 116 IMT-D-12 16–17
16 35 1 5/16-12 .910 1.340 1.210 9 .28 .875 .218 .510 213 IMT-D-16 27–29
20 63 1 5/8-12 1.420 2.440 1.535 10 .31 1.161 .275 .940 219 IMT-E-20 45–50
24 80 1 7/8-12 1.655 3.000 1.769 10 .37 1.340 .394 1.055 222 IMT-E-24 80–90
32 135 2 1/2-12 2.520 — 2.391 .50 1.804 .394 1.531 227 IMT-E-32 090–100
40 155 3-12 2.988 — 2.883 10 .59 2.187 .394 1.750 231 IMT-E-40 300–340
48 175 3 1/2-12 3.113 — 3.385 10 .69 2.562 .394 1.750 235 IMT-E-48 400–430
*
VALVE DIMENSIONS
55
SEE PAGE 72 FOR
INSTALLATION TOOL
ORDERING INFORMATION
CHECK VALVES
70)
10
–22°F (–30°C) To 175°F (80°C)
(Depending on seal material)
2.915
3.415
CHECK VALVES
STRAIGHT THREAD PORT
(SEE SAE J1926 DIMENSIONS ON PAGE 78)
