HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
Overview
Symbol
Description
The HSV12-23X is a high pressure 2-way, piloted, poppet-type, normally
open screw in hydraulic cartridge valve designed for low leakage in load
holding applications
Operation
When de-energized, the HSV12-23X allows flow bi-directionally. When
energized, the valve's poppet closes on its seat, blocking flow from ports
2-1. In this mode the cartridge will allow flow from ports 1-2 after
overcoming the actuator and spring forces (see performance graph)
Manual Override Operation
To shift the valve manually, push and hold down manual override
button/knob
note: the manual override feature is intended for emergency use, not for
continuous-duty operation
Features
Bi-directional operation.
❍
Continuous-duty rated solenoid.
❍
Hardened seat for long life and low leakage.
❍
Optional coil voltages and terminations.
❍
Efficient wet-armature construction.
❍
Cartridges are voltage interchangeable.
❍
Manual override option.
❍
Waterproof E-Coils rated up to IP69K.
❍
Corrosion-resistant plating.
❍
Unitized, molded coil design.
❍
Cost effective cavity.
❍
All HyPerformance™ products are tested to NFPA specification
T2.6.1. and are tested at a verification level of 90% and an
assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: 10% cycle life
Proof pressure
690 bar (10000 psi)
hydraforce.com
9/10/2020
HSV12-23
HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
113.6 lpm (30 gpm)
Maximum internal leakage
7 drops/min - Note: With at port 2 350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid
temperature
-40 to 100 °C (-40 to 212 °F) - Note: With buna N seals
-26 to 204 °C (-15 to 400 °F) - Note: With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) - Note: With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
0.29 kg (0.63 lb) - Note: Without coil and nut
Internal wetted surface area
205 cm²; (31.8 in²;) - Note: HSV12-23
207 cm²; (32.1 in²;) - Note: Hsv12-23p/23k
Performance
hydraforce.com
9/10/2020
HSV12-23
HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
Dimensions
hydraforce.com
9/10/2020
HSV12-23
HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
Materials
Materials
Cartridge: Weight: (without coil and nut) 0.2 kg (0.6 lb) Steel with hardened work surfaces. Urethane seals without
back-up rings standard.
Standard Ported Body: Weight: 2.6 kg (1.1 lb) H–series ductile iron. Rated to 35 bar (507 psi).
10-Size E-Coil: Weight: 0.4 kg (0. lb); Fully encapsulated with rugged external metal shell. Rated up to IP69K with
integral connectors.
Installation Specifications
Cavity
Hvc12-2
hydraforce.com
9/10/2020
HSV12-23
HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
Cartridge installation torque
183 to 196 N-m (135 to 145 ft-lb) - Note: Steel/ductile iron cavity
122 to 136 N-m (90 to 100 ft-lb) - Note: Aluminum cavity
Orientation restriction
None
Accessories
Seal kit
SK12-2N-T - Note: Buna N
SK12-2V-T - Note: Fluorocarbon
SK12-2U-O - Note: Urethane
Housings
Coils
Order Code
POSITION CODE DESCRIPTION
HSV12-23CC-EEEE-FF-GG/HHHH
CC Manual Override
CC BLANK NONE
CC K Momentary Push Override, Knob
CC P Momentary Push Override, Button
EEEE Line Body
EEEE 0 No Body
EEEE 12HT Ductile Iron SAE 12
FF Seal
FF N Buna-N
FF U PPDI Urethane
FF V Fluorocarbon
GG Coil Voltage
GG 0 No Coil
GG 10 10 VDC
GG 110 110 VDC
GG 115 115 VAC
GG 12 12 VDC
GG 20 20 VDC
GG 230 230 VAC
GG 24 24 VDC
GG 24 24 VAC
GG 36 36 VDC
hydraforce.com
9/10/2020
HSV12-23
HSV12-23
hydraforce.com
SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY
OPEN
GG 48 48 VDC
HHHH Coil Termination
HHHH 0 No Coil
HHHH AG D-Coil, DIN 43650
HHHH AP D-Coil, 1/2" Conduit and Dual Lead Wires
HHHH DG D-Coil, DIN 43650
HHHH DL D-Coil, Dual Lead Wires
HHHH DL 36" D-Coil, Dual Lead Wires 36"
HHHH DL/W D-Coil, Dual Lead Wires with WeatherPak Connector
HHHH DL/W/D D-Coil, Dual Lead Wires with WeatherPak Connector with Diode
HHHH DP D-Coil, 1/2" Conduit and Dual Lead Wires
HHHH DR D-Coil, Deutsch
HHHH DR/D D-Coil, Deutsch with Diode
HHHH DR/Z D-Coil, Deutsch with Zener Diode
HHHH DS D-Coil, Dual Spade
HHHH EG E-Coil, DIN 43650
HHHH EG/Z E-Coil, DIN 43650 with Zener Diode
HHHH EJ E-Coil, AMP Jr.
HHHH EJ/Z E-Coil, AMP Jr. with Zener Diode
HHHH EL E-Coil, Dual Lead Wires
HHHH EL 36" E-Coil, Dual Lead Wires 36"
HHHH EL/W/Z E-Coil, Dual Lead Wires with WeatherPak Connector with Zener Diode
HHHH EL/Z E-Coil, Dual Lead Wires with Zener Diode
HHHH ER E-Coil, Deutsch
HHHH ER/Z E-Coil, Deutsch with Zener Diode
HHHH EY E-Coil, Metri-Pack 150
HHHH EY/Z E-Coil, Metri-Pack 150 with Zener Diode
hydraforce.com
9/10/2020
HSV12-23
