HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
Overview
Symbol
Description
A proportional solenoid-operated, 3-way, normally closed flow control,
screw-in hydraulic cartridge valve intended for post-compensated
applications with load sense systems. In post-compensated systems the
load sense (port 1) of each of HSPEC10-32 valve is connected to
highest load which maintains flow sharing when flow demand exceeds
flow supply. Pressure compensation value of the valve defined as
pressure difference between inlet and load sense ports is provided by
appropriate setup of a pump load sense control or by additional pressure
compensator valve, one for the whole system, in case if the pump is
non-adjustable
Operation
When de-energized, the hspec10-32xx blocks flow from port 3 to port 2.
The valve will regulate flow out of port 2 regardless of load pressure with
flow rate proportional to current applied to the solenoid
Features
Integral post-compensator.
❍
Integral load-sense.
❍
Reduced manifold space claim.
❍
Continuous-duty rated coils.
❍
Optional "A" type linear metering poppet.
❍
Manual override option.
❍
E-Coils rated up to IP69K.
❍
Flow sharing possible
❍
All HyPerformance™ valves are tested to the rigorous standards of
NFPA specification T2.6.1 and are tested at a verification level of
90% and an assurance of 99%
❍
Ratings
Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: 10% cycle life
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
hydraforce.com
9/28/2020
HSPEC10-32
HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
Flow Ratings
Flow rating
34.0 lpm (9.0 gpm) - Note: Hspec10-32/32t ( compensation value 11 bar (160 psi)
37.9 lpm (10.0 gpm) - Note: Hspec10-32a/32at ( compensation value 11 bar (160 psi)
Maximum internal leakage
7 drops/min - Note: With at port 3 or port 1 350 bar (5075 psi)
Temperature Ratings
Maximum operating fluid
temperature
-40 to 100 °C (-40 to 212 °F) - Note: With buna N seals
-26 to 204 °C (-15 to 400 °F) - Note: With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) - Note: With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
0.19 kg (0.41 lb) - Note: HSPEC10-32X without coil and nut
0.20 kg (0.43 lb) - Note: HSPEC10-32XT without coil and nut
Internal wetted surface area
182.3 cm²; (28.26 in²;) - Note: Hspec1032xt
173.1 cm²; (26.83 in²;) - Note: Hspec1032x
Performance
hydraforce.com
9/28/2020
HSPEC10-32
HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
hydraforce.com
9/28/2020
HSPEC10-32
HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
Dimensions
hydraforce.com
9/28/2020
HSPEC10-32
HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
Materials
Materials
Cartridge: Weight: (without coil and nut): 0.19 kg. (0.41 lbs.); With Manual Override: 0.20 kg. (0.43 lbs.) Steel with
hardened work surfaces. Zinc-plated exposed surfaces. PPDI urethane seals without back-up rings standard.
E-Coil: Weight: 0.41 kg (0.9 lb); Fully encapsulated with rugged external metal shell. Rated up to IP69K with integral
connectors.
Ported Body: Weight: 1.40 kg. (3.09 lb.). H-series ductile iron standard. Rated to 345 bar (5000 psi)
Installation Specifications
Cavity
Hvc10-3
Cartridge installation torque
102 to 115 N-m (75 to 85 ft-lb) - Note: Steel/ductile iron cavity
81 to 88 N-m (60 to 65 ft-lb) - Note: Aluminum cavity
hydraforce.com
9/28/2020
HSPEC10-32
HSPEC10-
32
PROPORTIONAL FLOW CONTROL VALVE WITH INTEGRAL
COMPENSATOR
Coil nut torque
7 to 10 N-m (5 to 7 ft-lb)
Orientation restriction
None
Accessories
Seal kit
SK10-3N-MM - Note: Buna N
SK10-3V-MM - Note: Fluorocarbon
SK10-3U-OO - Note: Urethane
Housings
Coils
Order code
hydraforce.com
9/28/2020
HSPEC10-32
