Symbol
Description
The EHPR98-G38XXX is a direct-acting, spool-type, proportional, pressure reducing
relieving valve. It is a 3rd generation hydraforce drop-in, flange mounted cartridge type
valve for use with mineral based or synthetic (with lubricating properties) hydraulic fluids.
The coil is an integral part of the valve and is not serviceable the regulated pressure is
proportional to the input electrical current in the pressure ranges shown.
NOTE: The standard plunger is recommended in applications with inlet pressures up to
34 bar (500 psi) that require faster response with increased volume at the control port.
Minimum volume at the control port may cause the valve to become unstablet. For
applications with inlet pressures up to 69 bar (1000 psi) and decreased volume at the
control port the damped plunger is recommended.
Features
Economical drop-in style
Mounting plate option
Several regulated pressure ranges
Retrofit option for EHPR98- T38
Quick response time
Screen option
Top-mounted connector
Low leakage
Overview
Ratings
Pr e ssur e Ratings
Pressure rating
44.8 bar (650 psi) - Note : At port 1
34.5 bar (500 psi) - Note : At port 2 (standard plunger)
69 bar (1000 psi) - Note : At port 2 (damped plunger)
34.5 bar (500 psi) - Note : At port 3
Proof pressure
207 bar (3000 psi) - Note : Ports 1, 2
54 bar (780 psi) - Note : Port 3
Burst pressure
249 bar (3625 psi) - Note : All ports pressurized
Control pressure at maximum
control current
21 bar (305 psi) - Note : EHPR98- G38A
25 bar (363 psi) - Note : EHPR98- G38B
30 bar (435 psi) - Note : EHPR98- G38C
Flow Rating s
Flow rating
23 lpm (6 gpm)
Maximum internal leakage
50 ml/min (3.1 in³/min) - Note : At 34.5 bar (500 psi) de-energized
Othe r Ratings
Cycle life
10 million cycles
Environmental rating
IP69 K
Corrosion protection
960 hour salt spray per ASTM B117
Te mpe rature Ratings
Operating fluid temperature
-40 to 149 °C (-40 to 300 ° F) - Note : HNBR
-26 to 204 °C (-15 to 400 ° F) - Note : Fluorocarbon
Storage temperature
-40 to 70 °C (-40 to 158 ° F)
Ambient temperature
-40 to 120 °C (-40 to 248 ° F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt