HTS16-S34F
hydraforce.com
PRESSURE RELIEVING PROPORTIONAL CARTRIDGE VALVE
U.S. PATENT # 6,267,350 and 7,137,406
Overview
Symbol
Description
HTS16-S34F is screw-in, cartridge style, proportional pressure relief
valve. Spool-type main stage is combined with a single stage, poppet
style, pressure relieving proportional valve. The regulated pressure is
inversely proportional to the electrical current input
Operation
The HTS16-S34F is a spring-biased valve that blocks flow from port 1 to
port 2 until pressure sufficient to open the valve by overcoming the
preset induced by pilot spring force is present at port 1. With no current
applied, the valve will relieve flow to maintain pressure set at hf factory
Features
Multifunction proportional relief valve with vented logic element
❍
Low pressure drop.
❍
Rated for high pressure operation
❍
Pressure can be set at factory at range between 55.2 to 345 bar
(800 to 5000 psi)
❍
High flow rating
❍
Port 2 can be pressurized for logic applications
❍
Corrosion-resistant plating
❍
12- or 24-volt environmental coils
❍
All HyPerformance products are tested to the rigorous standards of
the NFPA specification T2.6.1.
❍
All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
413 bar (6000 psi) - Note: Port 1
413 bar (6000 psi) - Note: Port 2
103 bar (1500 psi) - Note: Port 3
Proof pressure
448 bar (6500 psi) - Note: Port 1
448 bar (6500 psi) - Note: Port 2
207 bar (3000 psi) - Note: Port 3
Burst pressure
861.8 bar (12500 psi)
hydraforce.com
10/4/2020
HTS16-S34F
HTS16-S34F
hydraforce.com
PRESSURE RELIEVING PROPORTIONAL CARTRIDGE VALVE
U.S. PATENT # 6,267,350 and 7,137,406
Pressure differential at maximum
current
8.27 bar (120 psi)
Pressure setting
55.2 to 345 bar (800 to 5000 psi) - Note: Valve CAN be set in hf factory to any pressure
in this range
Flow Ratings
Flow rating
200 lpm (52 gpm)
Temperature Ratings
Maximum operating fluid
temperature
-40 to 100 °C (-40 to 212 °F) - Note: With /buna-n seals
-26 to 204 °C (-15 to 400 °F) - Note: With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) - Note: With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)
Operating Parameters
Fluids
Mineral based or synthetic with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
0.58 kg (1.27 lb)
Internal wetted surface area
466 cm²; (72.2 in²;)
Performance
hydraforce.com
10/4/2020
HTS16-S34F
HTS16-S34F
hydraforce.com
PRESSURE RELIEVING PROPORTIONAL CARTRIDGE VALVE
U.S. PATENT # 6,267,350 and 7,137,406
Dimensions
hydraforce.com
10/4/2020
HTS16-S34F
HTS16-S34F
hydraforce.com
PRESSURE RELIEVING PROPORTIONAL CARTRIDGE VALVE
U.S. PATENT # 6,267,350 and 7,137,406
Materials
Materials
Cartridge: Weight: 0.58 kg (1.27 lb) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Single piece
urethane seal standard.
Ported Body: Weight: 5.34 kg (11.77 lb) H-series ductile iron, rated to 345 bar (5000 psi).
E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K
with integral connectors.
hydraforce.com
10/4/2020
HTS16-S34F
HTS16-S34F
hydraforce.com
PRESSURE RELIEVING PROPORTIONAL CARTRIDGE VALVE
U.S. PATENT # 6,267,350 and 7,137,406
Installation Specifications
Cavity
Hvc16-s3
Cartridge installation torque
135 N-m (100 ft-lb)
Coil nut torque
5.4 to 6.8 N-m (4 to 5 ft-lb)
Orientation restriction
None
Accessories
Seal kit
SK16-S3X-BB (x = N
V seal option)
SK16-S3U-OO - Note: U seal option
Housings
Coils
Order code
hydraforce.com
10/4/2020
HTS16-S34F
