HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
Overview
Symbol
Description
The HSP10-47DX is a high pressure, proportional, 4 port, 3 position,
spool type, motor spool, screw-in, cartridge style, hydraulic solenoid
valve
Operation
When de-energized, the HSP10-47DX blocks inlet port, while allowing
flow from ports 2 and 4 to port 1. When s1 coil is energized, flow is
allowed from 3 to 4, and from 2 to 1. When s2 coil is energized, flow is
allowed from port 3 to 2, and from 4 to 1. In circuits where work port
flows are unequal due to cylinder ratios, the higher return flow should be
directed to port 2
Manual Override Operation
For normal valve operation (neutral) the manual override pin must be
seated in the center detent groove (id groove on knob is in-line with top
of coil nut). To shift the valve manually from neutral to activate coil s1
function the knob is pushed down slightly and rotated 90$
counterclockwise and pulled. To detent in this position rotate the knob an
additional 90$ counterclockwise to lock in the upper detent groove. To
shift manually from neutral to activate coil s2 function the knob is push
down all the way. To detent in this position rotate the knob 90$ clockwise
to lock in the lower detent groove. The manual override feature is
intended for emergency use, not for continuous operation
Features
Industry-common cavity.
❍
Continuous-duty rated coil.
❍
Efficient wet-armature construction.
❍
Waterproof E-Coils rated up to IP69K.
❍
Patented high strength solenoid tube
❍
1000-hour salt-spray rated solenoid tubes.
❍
All HyPerformance products are tested to NFPA specification
T2.6.1.
❍
and are tested at a verification level of 90% and an assurance of
99%
❍
Ratings
Pressure Ratings
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: (10% cycle life)
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
See performance graph
Maximum internal leakage
508 ml/min (30 in³/min) - Note: Port 3 to port 1, at de-energized 350 bar (5075 psi)
Hysteresis per cent
10 % - Note: Of flow rating between 3.8 to 20.8 lpm (1.0 to 5.5 gpm)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid
temperature
-40 to 100 °C (-40 to 212 °F) - Note: With buna N seals
-26 to 204 °C (-15 to 400 °F) - Note: With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) - Note: With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
0.28 kg (0.61 lb) - Note: Without coil and nut
Internal wetted surface area
243 cm²; (37.62 in²;)
Electrical Parameters
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
Maximum control current
1.2 A - Note: For coil 12 Vdc
Minimum control current
- Note: Threshold current
Threshold current
0.44 A - Note: Nominal for coil s1 12 Vdc
0.38 A - Note: Nominal for coil s2 12 Vdc
Dither PWM frequency
100 Hz
Performance
Dimensions
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
Materials
Materials
Cartridge: Weight (without coil and nut): 0.28 kg (0.61 lb); Steel with hardened work surfaces. Zinc-plated exposed
surfaces. Urethane seals without back-up rings standard.
Standard Ported Body: Weight: 3.97 kg (8.75 lbs); H-series ductile iron standard. Rated to 345 bar (5000 psi).
E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K
with integral connectors.
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
Installation Specifications
Cavity
Hvc10-4
Cartridge installation torque
102 to 115 N-m (75 to 85 ft-lb) - Note: Steel/ductile iron cavity
81 to 88 N-m (60 to 65 ft-lb) - Note: Aluminum cavity
Orientation restriction
None
Accessories
Seal kit
SK10-4N-MMM - Note: Buna N
SK10-4V-MMM - Note: Fluorocarbon
SK10-4U-OOO - Note: Urethane
Housings
Coils
Order code
POSITION CODE DESCRIPTION
HSP10-47DE-H-J-L
E Manual Override
E B Momentary Push/Pull Override, 1.5" Diameter Aluminum Knob
E BLANK NONE
E K Three Position Override, 1.5" Diameter Aluminum Knob
E M Momentary Push/Pull Override, Red Knurled Knob
H Line Body
H 0 No Body
H 8HT Ductile Iron SAE 8
J Seal
J N Buna-N
J V Fluorocarbon
J U PPDI Urethane
L Coil
L 0 No Coil, D-Coil Spacer
L 0E No Coil, E-Coil Spacer
L 10DG 10 VDC, D-Coil, DIN 43650
L 10DL 10 VDC, D-Coil, Dual Lead Wires
L 10DR/D 10 VDC, D-Coil, Deutsch with Diode
L 10DS 10 VDC, D-Coil, Dual Spade
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
L 10EL 10 VDC, E-Coil, Dual Lead Wires
L 10ER 10 VDC, E-Coil, Deutsch
L 10ER/Z 10 VDC, E-Coil, Deutsch with Zener Diode
L 12DG 12 VDC, D-Coil, DIN 43650
L 12DL 12 VDC, D-Coil, Dual Lead Wires
L 12DL 12 VDC, D-Coil, Dual Lead Wires
L 12DL/W 12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L 12DL/W/D 12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L 12DR 12 VDC, D-Coil, Deutsch
L 12DR/D 12 VDC, D-Coil, Deutsch with Diode
L 12DR/Z 12 VDC, D-Coil, Deutsch with Zener Diode
L 12DS 12 VDC, D-Coil, Dual Spade
L 12EG 12 VDC, E-Coil, DIN 43650
L 12EJ 12 VDC, E-Coil, AMP Jr.
L 12EL 12 VDC, E-Coil, Dual Lead Wires
L 12EL 12 VDC, E-Coil, Dual Lead Wires
L 12EL/W/Z 12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L 12EL/Z 12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L 12ER 12 VDC, E-Coil, Deutsch
L 12ER/Z 12 VDC, E-Coil, Deutsch with Zener Diode
L 12EY 12 VDC, E-Coil, Metri-Pack 150
L 12EY/Z 12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L 20DR/D 20 VDC, D-Coil, Deutsch with Diode
L 20DS 20 VDC, D-Coil, Dual Spade
L 20ER 20 VDC, E-Coil, Deutsch
L 24AG 24 VDC, D-Coil, DIN 43650
L 24AP 24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L 24DG 24 VDC, D-Coil, DIN 43650
L 24DL 24 VDC, D-Coil, Dual Lead Wires
L 24DL/W 24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L 24DL/W/D 24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L 24DP 24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L 24DR 24 VDC, D-Coil, Deutsch
L 24DR/D 24 VDC, D-Coil, Deutsch with Diode
L 24DS 24 VDC, D-Coil, Dual Spade
L 24EG 24 VDC, E-Coil, DIN 43650
L 24EJ 24 VDC, E-Coil, AMP Jr.
L 24EL 24 VDC, E-Coil, Dual Lead Wires
L 24EL 24 VDC, E-Coil, Dual Lead Wires
hydraforce.com
9/28/2020
HSP10-47D
HSP10-47D
hydraforce.com
HIGH PRESSURE SOLENOID VALVE 3 POSITION, 4 PORT,
MOTOR CENTER U.S. PATENT #8,253,063
L 24EL/W/Z 24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L 24ER 24 VDC, E-Coil, Deutsch
L 24ER/Z 24 VDC, E-Coil, Deutsch with Zener Diode
L 24EY 24 VDC, E-Coil, Metri-Pack 150
L 24EY/Z 24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L 36DS 36 VDC, D-Coil, Dual Spade
hydraforce.com
9/28/2020
HSP10-47D
