HPE42-S62
hydraforce.com
PROPORTIONAL, PILOT OPERATED DIRECTIONAL VALVE
Overview
Symbol
Description
The HPE42-S62 is a high pressure, screw-in, cartridge-style, pilot-
operated, proportional, spool-type, hydraulic directional valve
Operation
In neutral position (unpiloted) the valve allows flow between ports 2 and
3 and between ports 4 and 5 bidirectionally. On remote pilot signal at
port 1 the spool shifts proportionally to the applied pilot pressure to
gradually close flow paths until spool is fully shifted blocking all ports.
The spring chamber is vented to port 6. Pressure at port 6 will directly
(1:1) affect the pilot pressure required and must be added to bias spring
value
Features
Hardened spool and cage for long life.
❍
All HyPerformance products are tested to the rigorous standards of
the NFPA specification T2.6.1.
❍
All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: (10% cycle life)
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Pilot pressure required
27 bar (400 psi) - Note: Minimum to fully shift
Flow Ratings
Flow rating
170 lpm (45 gpm)
Maximum internal leakage
980 ml/min (60 in³/min) - Note: At 350 bar (5075 psi)
Other Ratings
hydraforce.com
10/7/2020
HPE42-S62