HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
Overview
Symbol
Description
The HPD16-S50X is a high pressure, spool type, screw-in, cartridge
style, pilot operated, hydraulic directional valve
Operation
In the neutral position flow is allowed between ports 3 and 2
bidirectionally while port 4 is blocked. On remote pilot signal at port 1 the
valve's spool shifts to block port 2 while opening flow between ports 3
and 4 bidirectionally. The spring chamber is vented to the tank through
port 5. The vented spring chamber allows the valve to be fully
pressurized at ports 1, 2, 3 and 4 without affecting required pilot
pressure. Pressure at port 5 will increase the required pilot pressure at a
1:1 ratio
Features
Hardened spool and cage for long life.
❍
All HyPerformance™ products are tested to the rigorous standards
of the NFPA specification T2.6.1 and are tested at a verification
level of 90% and an assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: 10% cycle life
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
114 lpm (30 gpm) - Note: Spring option 100, n/v/u seal option
95 lpm (25 gpm) - Note: Spring option 100, ns/vs/us seal option
151 lpm (40 gpm) - Note: Spring option 150
Maximum internal leakage
246 ml/min (15 in³/min) - Note: HPD16-S50, ports 3-4 at and 350 bar (5075 psi)
hydraforce.com
10/7/2020
HPD16-S50
HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
32 cSt
410 ml/min (25 in³/min) - Note: HPD16-S50, ports 3-2 at and pilot pressure 350
bar (5075 psi) 32 cSt 350 bar (5075 psi)
328 ml/min (20 in³/min) - Note: Hpd16-s50n, ports 3-4 at and 350 bar (5075 psi)
32 cSt
492 ml/min (30 in³/min) - Note: Hpd16-s50n, ports 3-2 at and pilot pressure 350
bar (5075 psi) 32 cSt 350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid
temperature
-40 to 100 °C (-40 to 212 °F) - Note: Buna N
-26 to 204 °C (-15 to 400 °F) - Note: Fluorocarbon
-54 to 107 °C (-65 to 225 °F) - Note: Urethane
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)
Operating Parameters
Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating
contamination level
18/16/13 per ISO 4406
Properties
Cartridge weight
0.8 kg (1.75 lb)
Internal wetted surface area
510.0 cm²; (79.0 in²;)
Performance
hydraforce.com
10/7/2020
HPD16-S50
HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
Dimensions
hydraforce.com
10/7/2020
HPD16-S50
HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
Materials
Materials
Cartridge: Weight: 0.80 kg. (1.75 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces; PPDI
Urethane seals without backup rings standard.
Ported Body : Weight: 8.09 kg (17.79 lbs) H-series ductile iron standard. Rated to 345 bar (5000 psi).
Installation Specifications
hydraforce.com
10/7/2020
HPD16-S50
HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
Cavity
Hvc16-s5
Cartridge installation torque
298 to 311 N-m (220 to 230 ft-lb) - Note: Steel/ductile iron cavity
237 to 250 N-m (175 to 185 ft-lb) - Note: aluminum cavity
Orientation restriction
None
Accessories
Seal kit
Hsk16-s5n-bmmm - Note: Buna N
Hsk16-s5v-bmmm - Note: Fluorocarbon
Hsk16-s5u-oooo - Note: Urethane
Housings
Order code
POSITION CODE DESCRIPTION
HPD16-S50B-H-J-R
B Spool Option
B BLANK Standard
B N Normally Open in Transition
H Line Body
H 0 No Body
H 16HT Ductile Iron SAE 16
J Seal
J N Buna-N
J NS Buna-N with a Sealed Spool
J V Fluorocarbon
J VS Fluorocarbon with a Sealed Spool
J U PPDI Urethane
J US PPDI Urethane with a Sealed Spool
R Spring
R 100 100 psi Bias Spring
R 150 150 psi Bias Spring
hydraforce.com
10/7/2020
HPD16-S50
HPD16-S50
hydraforce.com
PILOTED DIRECTIONAL VALVE
hydraforce.com
10/7/2020
HPD16-S50
