DRAWING NUMBER
DESCRIPTION
HYDRAFORCE
REV
ECN
BY
DATE
R
R
THIRD ANGLE
PROJECTION
THIS INFORMATION HEREON IS THE
PROPERTY OF HYDRAFORCE INC.
AND/OR ITS SUBSIDIARIES AND IS
LOANED SUBJECT TO RETURN UPON
DEMAND. IT IS NOT TO BE REPRODUCED
OR USED DIRECTLY OR INDIRECTLY IN
ANY WAY DETRIMENTAL TO THE
INTERESTS OF HYDRAFORCE
1.22
31,1[ ]
0.78
19,8[ ]
SPOTFACE
0.02
0,4[ ]
3
0017943
WD1/AG2
22NOV2016
NV95-20-X
SHEET 1 OF 1
BLEED VALVE
-
-
SCALE: ---
-
ALL DIMENSIONS ARE FOR REFERENCE ONLY.
D:3.2
M:3.2
DESCRIPTION:
THE NV95-20 IS A SCREW-IN, HYDRAULIC BLEED-DOWN VALVE.
OPERATION:
THE CARTRIDGE IS USED ONLY FOR EQUIPMENT SERVICING PURPOSES
AND SHOULD BE SHUT OFF DURING NORMAL HYDRAULIC SYSTEM OPERATIONS.
PORT 2 MUST BE CONNECTED TO TANK.
SPECIFICATIONS:
PRESSURE RATING: 3500 psi [241 bar] - ALUMINUM CAVITY
5075 psi [350 bar] - STEEL/DUCTILE IRON CAVITY
6090 psi [420 bar] (10% CYCLE LIFE) - STEEL/DUCTILE
IRON CAVITY
BURST PRESSURE: 20000 psi [1380 bar] - STEEL/DUCTILE IRON CAVITY
MAXIMUM INTERNAL LEAKAGE: 3 drops/min [0.15 ml/min] AT SHUT-OFF
OPERATING FLUID TEMPERATURE:
(BUNA N) -40°F TO 212°F [-40°C TO 100°C]
(FLUOROCARBON) -15°F TO 400°F [-26°C TO 204°C]
(POLYURETHANE) -65°F TO 225°F [-54°C TO 107°C]
STORAGE TEMPERATURE: -40°F TO 160°F [-40°C TO 70°C]
AMBIENT TEMPERATURE: -40°F TO 194°F [-40°C TO 90°C]
MAXIMUM OPERATING CONTAMINATION LEVEL: 18/16/13 PER ISO4406
FLUIDS: MINERAL BASED OR SYNTHETIC HYDRAULIC FLUID
WITH LUBRICATING PROPERTIES.
CARTRIDGE WEIGHT: 0.09 lb [0,04 kg]
INTERNAL WETTED SURFACE AREA: 2.9 in
2
[18,8 cm
2
]
INSTALLATION SPECIFICATION:
CAVITY: VC95-2
INSTALLATION:
SCREW: 16-20 ft-lb [22-27 N-m] WITH THE NUT LOOSE
NUT: 16-20 ft-lb [22-27 N-m]
ORIENTATION RESTRICTIONS: NONE.
DESCRIPTION AND SPECIFICATIONS
OUTLINE
0.50
[12,7]
ACROSS FLATS
0.63
[15,9]
ACROSS FLATS
NV95-20-X
SEALS
BUNA N - N
FLUOROCARBON - V
POLYURETHANE - P
BASE MODEL
NUMBER
ORDERING INFORMATION:
(CONSULT FACTORY OR CATALOG
FOR OTHER AVAILABLE OPTIONS)
INCH
[mm]
2
1
PORT 1
PORT 2
