HCV10-20
hydraforce.com
CHECK VALVE
Overview
Symbol
Description
The HCV10-20 is a screw-in, cartridge style, hydraulic check valve for
use as a blocking or load-holding device for high pressure applications
Operation
The check valve allows flow from port 1 to 2, while normally blocking
flow in the opposite direction. The cartridge valve has a fully guided
poppet which is spring biased closed until sufficient pressure is applied
at port 1 to open to port 2
Features
Hardened seat for long life and low leakage.
❍
Optional bias springs for back-pressure application flexibility.
❍
High pressure operation.
❍
Fully guided check assembly.
❍
Industry-common cavity.
❍
All HyPerformance products are tested to NFPA specification
T2.6.1 and are tested at a verification level of 90% and an
assurance of 99%.
❍
Ratings
Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) - Note: (10% cycle life)
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
76 lpm (20 gpm)
Maximum internal leakage
0.25 ml/min (5 drops/min) - Note: At
350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
hydraforce.com
10/7/2020
HCV10-20