HSV12-29 HyPerformance™ Poppet, 2-Way,
DESCRIPTION
A solenoid-operated, 2-way, piloted, poppet-type, normally open, bi-directional, screw-
in hydraulic cartridge valve, designed to function as a load holding or blocking valve in
high-pressure applications requiring low internal leakage bi-directionally.
OPERATION
When de-energized, the HSV12-29 allows flow in both directions. When energized, the
valve blocks flow in both directions.
Operation of Manual Override Option: The manual override feature is intended for
emergency use, not continuous duty operation. To shift the valve manually, push and
hold down the manual override button or knob.
FEATURES
• Bi-directional operation.
• Continuous-duty rated solenoid.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Manual override option.
• Waterproof E-Coils rated up to IP69K.
• Corrosion-resistant plating.
• Unitized, molded coil design.
• Cost effective cavity.
• All HyPerformance products are tested to the rigorous standards
of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90%
and an assurance of 99%.
RATINGS
Operating Pressure: 350bar (5075psi); 10% cycle life: 420bar (6090psi)
Note: All HyPerformance products are tested for 900K cycles at 350bar and 100K
cycles at 420bar.
Proof Pressure: 690bar (10,000psi)
Burst Pressure: 1380bar (20,000psi)
Flow Rating: 114 lpm (30 gpm)
Internal Leakage: 7 drops/minute with 350bar (5075psi) at port 2.
Temperature: -54 to 107°C (-65 to 225°F) with urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: E-Coil: 1.7 amps at 12Vdc; 0.85 amps at
24Vdc
Minimum Pull-in Voltage: 85% of nominal at 350bar (5075psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-2; See page 9.112.1
Cavity Tool: HCT12-2XX; See page 8.600.1
Seal Kit: SK12-2U-0; See page 8.650.1
Coil Nut: Part No: 4553800
1.099.3
11.0/160
8.3/120
5.5/80
2.8/40
37.9
10
75.8
20
113.6
30
FLOW lpm/gpm
PRESSURE DROP bar/psi
Pressure Drop vs. Flow
(Cartridge only)
2 to 1 —— 1 to 2 - - - -
32 cSt/150 sus oil at 40°C (104°F)
ISO SYMBOL
PERFORMANCE
(Cartridge Only)
SOLENOID VALVES
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.