HOUSINGS AND ACCESSORY PRODUCTS
HP10-21 Hand Pump
USASI/ISO:
SYMBOLS
PERFORMANCE
(Cartridge Only)
8.555.1
172/2500
207/3000
138/2000
103/1500
69/1000
34/500
27
20
54
40
81
60
108
80
136
100
163
120
OPERATOR HANDLE FORCE Nm/ft-lbs.
PRESSURE bar/psi
PUMP SELECTION CHART
Max. Operating Pressure: 207 bar (3000 psi)
Max. Handle Force: 305 Nm (225 ft-lbs.)
DISPLACEMENT A
DISPLACEMENT B
PUSH TO
PRESSURIZE
PULL TO
PRESSURIZE
DESCRIPTION
A screw-in, cartridge-style, push or pull type hand pump with two built-in checks.
OPERATION
The HP10-21 provides hydraulic fl ow to 0.65 cu. in. per stroke, at pressures to 207 bar
(3000 psi). Integral suction and outlet checks provide a compact device which delivers
true operational system fl ows. See chart for handle torque requirements.
Note: As with any mechanical hydraulic actuator (piston rods, rotating pump shaft,
etc.) the shaft will become coated with a minute amount of oil from the internal high
pressure system. The rod protruding from the hand pump may feel damp with oil after
use. This is desirable because the oil coating serves to lubricate the shaft seal,
reducing friction and assuring extended seal life.
FEATURES
• Hardened parts for long life.
• Handle Beam rotates 360°
• Push or pull linkage standard.
• Heavy duty construction.
• Industry common cavity.
• Displacement up to 10.6 cc (0.65 cu in.) per stroke.
RATINGS
Operating Pressure: 207 bar (3000 psi)
Flow: Up to 10.6 cc (0.65 cu. in.) per stroke
Leakage: At outlet check, 5 drops/minute
Suction Pressure: 194 mm Hg (7.6 in. Hg, 104 in. H
2
O) less than
atmospheric pressure
Temperature: -40 to 120°
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties
at viscosities of 7.4 to 420 cSt (50 to 2000 sus)
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1
Cavity Tool: CT10-2XX; See page 8.600.1
Seal Kit: SK10-2X-T; See page 8.650.1
Handle Kit: 16 in. handle, 2.65 kg. (1.2 lbs.),
Part no. 6502340; Must be ordered separately
HYDRAFORCE
.com
®
Blue rectangles are links to other catalog pages.
DIMENSIONS
HP10-21
8.555.2
Cartridge: Weight: 0.86 kg. (1.9 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
Buna N O-rings and polyester
elastomer back-ups standard.
Anodized aluminum knobs.
Standard Ported Body: Weight:
0.16 kg. (0.35 lbs.) Anodized high-
strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi). Ductile
iron bodies available; dimensions
may differ. See page 8.010.1
MATERIALS
PUSH TO PRESSURIZE
PULL TO PRESSURIZE
The Beam (Handle Socket)
Inside Diameter 0.85" (21.6 mm)
Beam Rotates around Vertical Axis
for 360 Handle Positioning
TO ORDER
HP10-21
__ - __ __ __ - __ - __
Porting
0 Cartridge Only
6T SAE 6
8T SAE 8
2B 1/4 in. BSP*
3B 3/8 in. BSP*
4B 1/2 in. BSP*
*BSP Body; U.K. Mfr. Only
**Push or Pull
Push Handle Actuation A
Pull Handle Actuation B
Seals
N Buna N (Std.)
V Fluorocarbon
*Shipped as kit for installation
Displacement
A 7.4 cc (0.45 cu. in.) per stroke
B 10.6 cc (0.65 cu. in.) per stroke
®
HYDRAFORCE
HYDRAFORCE
.com
®
Handle Kit Part no. 6502340;
Must be ordered separately.
Blue rectangles are links to other catalog pages.
